Overview of Concrete Foaming Agent Using Sodium Alpha Olefin Sulfonate AOS Powder

Concrete Foaming Agent Using Sodium Alpha Olefin Sulfonate AOS Powder is a surfactant that generates large quantities of uniform, stable foam through physical or chemical means. When this foam is thoroughly mixed with cement-based slurry (cement, fly ash, etc.) and cured naturally or with steam, it forms a novel lightweight material—foam concrete—internally filled with numerous closed air cells.

Features of Concrete Foaming Agent Using Sodium Alpha Olefin Sulfonate AOS Powder

1. High Foam Multiplication Ratio: High foam multiplication ratio allows for dilution before use. One kilogram of concentrate generates a large volume of uniform foam, delivering significant cost savings.

2. Strong Foam Stability: Produces resilient, uniformly fine foam walls that resist collapse or breakage. Effectively withstands pressure from cement slurry, ensuring independent and sealed air cells within the finished product.

3. Uniform and Fine Pore Structure: The foam concrete exhibits an ideal internal structure of closed spherical micro-pores, guaranteeing superior physical properties.

4. Low Material Consumption: Achieves equivalent density and strength grades with lower dosage than standard market products, reducing costs.

5. Eco-friendly and safe: Neutral formulation, non-toxic, odorless, and non-corrosive, posing no harm to the environment or human health. Classified as a green building material.

6. Wide adaptability: Excellent compatibility with various cements (including ordinary Portland cement and aluminate cement) and admixtures. Rapid foaming action with extended foam stability.

Specifications of Concrete Foaming Agent Using Sodium Alpha Olefin Sulfonate AOS Powder

Specs of Concrete Frothing Representative Using Salt Alpha Olefin Sulfonate (AOS) Powder

Product Summary

This concrete foaming agent makes use of high-purity sodium alpha olefin sulfonate (AOS) powder as its primary energetic component. It creates stable, uniform air bubbles in cement mixtures. The result is light-weight, insulating, and practical foam concrete with improved strength-to-density ratios.

Secret Technical Specs

Active Matter Material: Minimum 90%.
pH Worth (1% aqueous remedy): 7.0– 9.0.
Ordinary Bubble Size: 0.2– 0.8 mm.
Foam Stability Time: Over 60 minutes at 25 ° C.
Solubility: Totally soluble in water at area temperature.
Ash Web Content: Much less than 5%.
Micelle Focus (CMC): Approximately 1.5 mmol/L.

Efficiency Includes

The AOS-based foaming representative produces fine, closed-cell foam that withstands collapse during mixing and pouring. It functions well throughout a large range of water temperatures and concrete kinds. The representative does not consist of chlorides or other harsh substances, so it will not damage steel reinforcement. It additionally blends easily without clumping and keeps consistent performance batch after set.

Usage Guidelines

Common dose varieties from 0.3% to 0.8% by weight of concrete. Always pre-dilute the powder in tidy water prior to adding it to the lathering device. Water quality influences foam quality– make use of potable water whenever feasible. Shop the powder in a trendy, completely dry place away from dampness. Maintain containers secured when not being used to prevent caking.

Packaging and Handling

Offered in 25 kg multi-layer paper bags with internal polyethylene lining. Take care of with basic industrial health practices. Prevent direct contact with eyes or skin. Usage gloves and safety glasses throughout handling. In situation of spillage, sweep up product and throw away it according to regional guidelines.

Applications of Concrete Foaming Agent Using Sodium Alpha Olefin Sulfonate AOS Powder

Applications of Concrete Frothing Representative Utilizing Salt Alpha Olefin Sulfonate (AOS) Powder

Why AOS Powder Functions Well in Foam Concrete

Sodium Alpha Olefin Sulfonate (AOS) powder is a solid frothing agent. It creates steady, fine bubbles when combined with water and concrete. These bubbles assist make light-weight concrete that is easy to take care of and shape. The foam stays company during putting and setting, which maintains the final product attire and strong.

Building Lightweight Insulating Blocks

One significant use of AOS-based lathering agents remains in making shielding concrete blocks. These blocks are light however still support weight well. They also reduce warm transfer, which aids buildings remain cozy in wintertime and cool in summer season. Specialists like them because they cut labor time and minimize structural lots on structures.

Loading Gaps and Leveling Ground

Foam concrete made with AOS is excellent for filling voids under floors, roadways, or pipes. It streams conveniently right into tight spots without requiring hefty equipment. When established, it holds its form and does not shrink a lot. This makes it trusted for ground stabilization and slope repair work.

Precast Wall Panels and Roofing Components

Suppliers utilize AOS foam concrete to produce precast wall and roofing system components. The product’s low thickness cuts transportation prices. Its smooth surface area needs little ending up. And also, the closed-cell structure stands up to water and fire better than several standard blends.

Easy Combining and Consistent Results

AOS powder liquifies quick in water and blends efficiently with cement slurry. Employees get predictable foam volume every single time. There is less danger of collapse or uneven texture. This consistency quicken manufacturing and lowers waste on site.

Secret Benefit: AOS provides clean, durable foam without severe smells or harmful residues. It works well in both tiny workshops and large-scale plants.

Company Profile

We are the global leader in lightweight concrete and advanced engineered foam solutions. Known globally for its commitment to research, innovation, and applied expertise, we have been providing engineered foam solutions since the early 2012’s.

We can supply high-quality concrete admixture and foam concrete related products all over the world.

The company has a professional technical department and quality supervision department, a well-equipped laboratory, and equipped with advanced testing equipment and after-sales customer service center.

If you are interested, please feel free and contact us.

Payment

T/T, Western Union, Paypal, Credit Card etc.

Shipment

By air, by sea, by express, as customers request.

5 FAQs of Concrete Foaming Agent Using Sodium Alpha Olefin Sulfonate AOS Powder

Frequently Asked Questions About Concrete Foaming Agent with Sodium Alpha Olefin Sulfonate (AOS) Powder

What is a concrete foaming agent made with AOS powder?

It is a chemical additive used to create stable air bubbles in lightweight concrete. The main active ingredient is Sodium Alpha Olefin Sulfonate (AOS) powder. This helps produce uniform, fine pores in the concrete mix, which lowers density and improves insulation.

Why choose AOS over other foaming agents?

AOS gives better foam stability and longer bubble life compared to many alternatives. It works well in hard water and stays effective across a wide temperature range. Also, it mixes easily into concrete without clumping or separating.

How do you use AOS-based foaming agent in concrete?

First, dissolve the AOS powder in clean water. Then, use a foam generator to turn the solution into stable foam. Finally, blend this foam into the cement slurry during mixing. Follow the recommended dosage—usually 0.5% to 2% by weight of cement—to get consistent results.

Is AOS safe for workers and the environment?

Yes. AOS is biodegradable and has low toxicity. It does not release harmful fumes during handling or curing. Still, wear gloves and eye protection when working with the powder to avoid skin or eye irritation.

Can this foaming agent be used in all types of lightweight concrete?

It works well in most foam concrete applications, including blocks, panels, and insulation fills. However, performance may vary based on local materials like sand or cement type. Always run a small test batch before full-scale production to check strength and foam quality.