Overview of High Concentration Industrial Grade Cellular Concrete Foaming Agent for Construction Admixtures

High Concentration Industrial Grade Cellular Concrete Foaming Agent for Construction Admixtures is a surfactant that generates large quantities of uniform, stable foam through physical or chemical means. When this foam is thoroughly mixed with cement-based slurry (cement, fly ash, etc.) and cured naturally or with steam, it forms a novel lightweight material—foam concrete—internally filled with numerous closed air cells.

Features of High Concentration Industrial Grade Cellular Concrete Foaming Agent for Construction Admixtures

1. High Foam Multiplication Ratio: High foam multiplication ratio allows for dilution before use. One kilogram of concentrate generates a large volume of uniform foam, delivering significant cost savings.

2. Strong Foam Stability: Produces resilient, uniformly fine foam walls that resist collapse or breakage. Effectively withstands pressure from cement slurry, ensuring independent and sealed air cells within the finished product.

3. Uniform and Fine Pore Structure: The foam concrete exhibits an ideal internal structure of closed spherical micro-pores, guaranteeing superior physical properties.

4. Low Material Consumption: Achieves equivalent density and strength grades with lower dosage than standard market products, reducing costs.

5. Eco-friendly and safe: Neutral formulation, non-toxic, odorless, and non-corrosive, posing no harm to the environment or human health. Classified as a green building material.

6. Wide adaptability: Excellent compatibility with various cements (including ordinary Portland cement and aluminate cement) and admixtures. Rapid foaming action with extended foam stability.

Specifications of High Concentration Industrial Grade Cellular Concrete Foaming Agent for Construction Admixtures

High Focus Industrial Grade Cellular Concrete Frothing Agent

Product Introduction

This foaming representative is made for commercial usage in cellular concrete manufacturing. It develops steady, uniform air bubbles in the mix. The outcome is light-weight concrete with strong insulation and good workability. Building contractors and makers count on it for regular performance in massive projects.

Secret Specifications

Appearance: Clear to light brownish-yellow fluid
Solids material: 30% ± 2%.
pH value: 6.5– 8.0 (at 25 ° C).
Dilution proportion: 1:30 to 1:60 with clean water.
Foam thickness: 40– 60 kg/m ³ (when watered down and aerated effectively).
Stability: Foam holds shape for over 60 minutes without breaking down.
Compatibility: Works well with Rose city cement, fly ash, and common admixtures.

Efficiency Advantages

The representative produces penalty, closed-cell foam that mixes uniformly right into slurry. This provides the final product reduced thermal conductivity and high compressive toughness for its thickness. It also reduces material use and decreases overall job weight. The formula resists hard water and does accurately across various temperature levels.

Handling & Storage space

Store in an awesome, completely dry location away from straight sunlight. Keep container securely closed when not in use. Service life is twelve month from production day if stored appropriately. Prevent cold. Always use handwear covers and eye defense during handling. Rinse skin or eyes quickly with water if call occurs.

Use Guidelines

Dilute the concentrate with clean water as required. Mix thoroughly before feeding right into a foam generator. Readjust dilution based on wanted foam density and ambient conditions. Test tiny batches initially to adjust proportions for your certain mix layout. Use within 24-hour after dilution for finest results.

Applications of High Concentration Industrial Grade Cellular Concrete Foaming Agent for Construction Admixtures

High Concentration Industrial Grade Cellular Concrete Lathering Representative

Effective Performance for Lightweight Building

This lathering representative is created industrial usage. It develops steady, consistent foam for mobile concrete. The high concentration means you utilize less item to get strong outcomes. Builders rely on it to make lightweight concrete that still holds up under stress.

The foam blends easily right into cement slurry. It spreads out equally and keeps its form throughout treating. This gives the end product consistent thickness and good insulation residential properties. Walls, obstructs, and panels made with this representative are lighter but continue to be resilient.

Why pick this foaming agent?
It functions quick and blends efficiently. No clumping. No waste. The bubbles remain intact from mixing to hardening. That causes less splits and much better structural performance. It additionally lowers product costs because much less concrete is required.

Appropriate for lots of tasks
Use it in precast plants, on-site puts, or insulation loads. It’s suitable for making aerated blocks, roof covering decks, and void-filling cement. Specialists value exactly how it streamlines production while meeting structure standards.

Constructed for difficult problems
This agent deals with various water types and temperature levels. It remains efficient also in hot or winter. Storage is simple– just keep it sealed and far from direct sunlight.

Manufacturers count on this item due to the fact that it supplies the exact same top quality batch after set. There’s no uncertainty. Simply trustworthy foam that sustains efficient, affordable building. Whether you’re casting blocks or putting pieces, this frothing representative aids you do the job right.

Company Profile

We are the global leader in lightweight concrete and advanced engineered foam solutions. Known globally for its commitment to research, innovation, and applied expertise, we have been providing engineered foam solutions since the early 2012’s.

We can supply high-quality concrete admixture and foam concrete related products all over the world.

The company has a professional technical department and quality supervision department, a well-equipped laboratory, and equipped with advanced testing equipment and after-sales customer service center.

If you are interested, please feel free and contact us.

Payment

T/T, Western Union, Paypal, Credit Card etc.

Shipment

By air, by sea, by express, as customers request.

5 FAQs of High Concentration Industrial Grade Cellular Concrete Foaming Agent for Construction Admixtures

Frequently Asked Questions: High Concentration Industrial Grade Cellular Concrete Foaming Agent

What is this foaming agent used for?

This foaming agent creates stable, uniform foam for cellular (foamed) concrete. Builders mix it with cement, water, and other materials to make lightweight concrete blocks, insulation panels, or fill voids. The foam reduces density while keeping strength acceptable for many construction needs.

Why choose a high-concentration formula?

High concentration means you use less product per batch. This lowers shipping costs and storage space. It also gives better control over foam quality. One liter can produce more usable foam than standard agents, making it cost-effective for large-scale jobs.

Is it compatible with common cement types?

Yes. This agent works well with Portland cement, slag cement, and most blended cements used in industrial projects. Always do a small test batch first. That helps confirm performance with your specific mix design and local water source.

How should it be stored?

Keep the container sealed and store it in a cool, dry place. Avoid freezing temperatures and direct sunlight. Proper storage keeps the agent stable for up to 12 months. Shake well before each use to maintain consistency.

Does it affect curing time or final strength?

The agent itself does not delay curing if used at the right dosage. However, because cellular concrete has more air, its compressive strength is lower than solid concrete. That’s normal and expected. Follow recommended water-to-cement ratios and foam volumes to meet your project’s strength targets.