Overview of Hot s Factory 1.0mm Silicone Coated Reinforced Glass Fiber Fabric

For high-impact resistance, we offer Steel Fibers, an ideal replacement for welded wire mesh in industrial floors and pre-cast elements. We also provide specialized Structural Synthetic Fibers that offer high tensile strength for demanding applications. These fibers are uniformly dispersed throughout the concrete mix, creating a multi-dimensional reinforcement network that traditional methods cannot achieve. This integrated approach simplifies construction, accelerates placement, and enhances the overall integrity and longevity of the concrete, providing a modern answer to age-old cracking and durability challenges.

Features of Hot s Factory 1.0mm Silicone Coated Reinforced Glass Fiber Fabric

1. Superior Crack Control and Enhanced Durability:

The primary feature of our fibers is their ability to bridge both micro-cracks that form during the plastic state and larger cracks in hardened concrete. This three-dimensional dispersion creates a more cohesive matrix that resists crack propagation. The direct benefit is a significant reduction in both plastic shrinkage cracking and long-term crack width. This leads to a much more durable concrete with lower permeability, which in turn enhances resistance to water ingress, freeze-thaw damage, and corrosion of any embedded steel. The result is a structure with a longer service life and reduced maintenance costs.

2. Increased Impact and Abrasion Resistance:

Fibers, particularly steel and robust synthetic macro fibers, dramatically improve the concrete’s toughness and post-crack performance. They absorb and distribute energy upon impact or loading. This feature provides the benefit of a more resilient surface that is less prone to spalling, chipping, and abrasion under heavy traffic or mechanical wear. This is a critical advantage for industrial floors, warehouse pavements, and infrastructure projects, leading to a harder-wearing surface that maintains its integrity over time.

3. Construction Efficiency and Cost Savings:

A key feature of using fiber reinforcement is the elimination of welded wire mesh (WWF) in many applications. This provides immense on-site benefits: it simplifies placement, as there is no mesh to be set up or potentially displaced, and it accelerates the entire construction process. By removing a labor-intensive step, projects see reduced labor costs and faster project timelines. The uniform distribution of fibers also ensures consistent reinforcement throughout the entire concrete section, unlike mesh, which can be improperly placed, leading to more reliable and predictable performance.

Specification of Hot s Factory 1.0mm Silicone Coated Reinforced Glass Fiber Fabric

Hot s Manufacturing facility 1.0 mm Silicone Coated Reinforced Glass Fiber Fabric– Product Spec

Material Structure

This textile utilizes top notch E-glass fiber as its base. The fibers are firmly woven to form a solid, steady framework. A premium-grade silicone layer is used equally on both sides. This finish provides the fabric excellent heat resistance and adaptability.

Thickness and Weight

The complete thickness of the fabric is exactly 1.0 mm. It maintains consistent dimensions across the whole roll. The weight varies from 850 to 950 grams per square meter, depending upon batch production resistances.

Temperature level Resistance

Continual usage temperature level: -70 ° C to+260 ° C. Short-term optimal temperature level: approximately 300 ° C.
The silicone layer secures the glass fibers from thermal degradation. This makes the textile trustworthy in both freezing and high-heat atmospheres.

Mechanical Characteristics

The enhanced weave provides high tensile toughness. Warp instructions strength exceeds 2800 N/5cm. Weft instructions toughness is over 2400 N/5cm. The fabric withstands tearing and abrasion during handling and installation.

Chemical and Environmental Resistance

It reveals strong resistance to water, oil, and most common industrial chemicals. UV direct exposure does not considerably impact performance in time. The product stays secure in moist or dry conditions.

Electric Insulation

This material offers great dielectric stamina. It appropriates for use in electrical insulation applications where warmth and fire resistance are needed.

Usual Applications

Individuals utilize this fabric in fire obstacles, development joints, welding coverings, and thermal insulation wraps. It likewise offers well in aerospace, auto, and industrial production settings where sturdiness under severe problems issues.

Available Sizes

Common roll size is 1.0 m or 1.5 m. Custom sizes can be ordered. Length per roll is typically 30 meters, but various other choices are offered upon demand.

Applications of Hot s Factory 1.0mm Silicone Coated Reinforced Glass Fiber Fabric

Applications of Hot’s Factory 1.0 mm Silicone Coated Reinforced Glass Fiber Fabric

High-Temperature Protection and Insulation

This fabric deals with severe heat without breaking down. It works well in industrial ovens, kilns, and furnaces. Factories use it to wrap pipes or cover warm surfaces. The silicone layer stops heat from getting away. At the very same time, it maintains surrounding locations risk-free from burns or fire.

Fire Barriers and Safety Curtains

Security teams rely on this product for fire-resistant drapes and obstacles. It does not ignite conveniently. Even under direct flame, it holds its form and strength. You’ll find it in cinemas, airports, and huge buildings where fire safety is crucial. It aids reduce flames and gives people even more time to leave.

Growth Joints and Flexible Connectors

Machinery and air duct systems broaden when they heat up. This fabric functions as a flexible connector in between components. It bends without tearing. It also seals spaces while enabling activity. Power plants and cooling and heating systems utilize it to reduce stress and anxiety on steel joints and prevent leakages.

Welding and Glow Security

Welders utilize this textile as protective coverings or displays. It blocks stimulates, spatter, and UV rays. Workshops lay it over floors, wall surfaces, or neighboring devices. It guards surfaces from damages during welding tasks. The enhanced glass fiber core includes sturdiness. The silicone layer withstands sticking and makes cleaning very easy.

Custom Industrial Covers and Liners

Manufacturers reduced and sew this fabric right into personalized covers. It lines chutes, receptacles, and conveyor systems. The surface remains smooth, so products slide with without sticking. It likewise withstands chemicals and abrasion. That makes it perfect for managing powders, granules, or warm mass goods in food, chemical, and mining procedures.

Resilience fulfills efficiency. This fabric withstands day-to-day wear, high warmth, and severe problems– without losing feature or integrity.

Company Profile

We are the global leader in lightweight concrete and advanced engineered foam solutions. Known globally for its commitment to research, innovation, and applied expertise, we have been providing engineered foam solutions since the early 2012’s.

We can supply high-quality concrete admixture and foam concrete related products all over the world.

The company has a professional technical department and quality supervision department, a well-equipped laboratory, and equipped with advanced testing equipment and after-sales customer service center.

If you are interested, please feel free and contact us.

Payment

T/T, Western Union, Paypal, Credit Card etc.

Shipment

By air, by sea, by express, as customers request.

5 FAQs of Hot s Factory 1.0mm Silicone Coated Reinforced Glass Fiber Fabric

Hot s Factory 1.0mm Silicone Coated Reinforced Glass Fiber Fabric – Frequently Asked Questions

What is this fabric made of?

This fabric uses high-strength glass fiber as its base. It gets coated with a layer of premium silicone on both sides. The total thickness is 1.0mm. This mix gives the material great heat resistance and strong mechanical performance.

How hot can it handle?

The fabric works well in temperatures from -70°C to +260°C. It stays stable even under constant high heat. Short-term exposure can go up to 300°C without damage. That makes it ideal for insulation, fire barriers, and high-temp gaskets.

Is it safe to use around fire?

Yes. The fabric is non-flammable and meets fire safety standards like UL94 V-0. It will not catch fire or melt. When exposed to flame, it chars but keeps its shape and strength. This helps slow down fire spread in emergencies.

Can it resist chemicals and weather?

It resists most acids, alkalis, oils, and solvents. UV rays and moisture do not break it down easily. The silicone coating protects the glass fibers underneath. So the fabric lasts long outdoors or in harsh industrial settings.

Where is this fabric commonly used?

People use it in welding blankets, expansion joints, thermal insulation wraps, and fire curtains. It also works in aerospace, automotive exhaust systems, and electrical insulation. Its flexibility and durability suit many demanding applications.