Overview of High Dilution Surfactant Protein Liquid Concrete Foaming Agent for Foam Concrete

High Dilution Surfactant Protein Liquid Concrete Foaming Agent for Foam Concrete is a surfactant that generates large quantities of uniform, stable foam through physical or chemical means. When this foam is thoroughly mixed with cement-based slurry (cement, fly ash, etc.) and cured naturally or with steam, it forms a novel lightweight material—foam concrete—internally filled with numerous closed air cells.

Features of High Dilution Surfactant Protein Liquid Concrete Foaming Agent for Foam Concrete

1. High Foam Multiplication Ratio: High foam multiplication ratio allows for dilution before use. One kilogram of concentrate generates a large volume of uniform foam, delivering significant cost savings.

2. Strong Foam Stability: Produces resilient, uniformly fine foam walls that resist collapse or breakage. Effectively withstands pressure from cement slurry, ensuring independent and sealed air cells within the finished product.

3. Uniform and Fine Pore Structure: The foam concrete exhibits an ideal internal structure of closed spherical micro-pores, guaranteeing superior physical properties.

4. Low Material Consumption: Achieves equivalent density and strength grades with lower dosage than standard market products, reducing costs.

5. Eco-friendly and safe: Neutral formulation, non-toxic, odorless, and non-corrosive, posing no harm to the environment or human health. Classified as a green building material.

6. Wide adaptability: Excellent compatibility with various cements (including ordinary Portland cement and aluminate cement) and admixtures. Rapid foaming action with extended foam stability.

Specifications of High Dilution Surfactant Protein Liquid Concrete Foaming Agent for Foam Concrete

Specs of High Dilution Surfactant Healthy Protein Fluid Concrete Lathering Agent

Product Introduction

This frothing agent is a liquid additive made from modified healthy protein surfactants. It produces stable, uniform air bubbles in foam concrete. The item works well even when diluted with big quantities of water. It aids produce lightweight concrete with excellent toughness and insulation residential properties.

Key Features

– High dilution proportion : Can be mixed with water at ratios approximately 1:60 without losing performance.
– Steady foam framework : Forms fine, closed-cell bubbles that withstand collapse during mixing and pouring.
– Low dose called for : Only 0.3– 0.8 kg per cubic meter of foam concrete is needed.
– Good compatibility : Functions efficiently with common Rose city concrete and usual admixtures.
– Environmentally risk-free : Has no damaging solvents or unstable organic substances (VOCs).

Technical Information

– Look: Light yellow to brownish-yellow liquid
– Thickness (20 ° C): 1.02– 1.06 g/cm FIVE.
– pH worth: 6.5– 8.0.
– Strong material: ≥ 28%.
– Foam development ratio: 20– 30 times.
– Foam half-life: ≥ 60 mins.

Usage Instructions

First, water down the foaming agent with tidy water using the suggested ratio. After that, feed the diluted solution into a foam generator. Mix the created foam uniformly into the cement slurry. Readjust water material and mixing time based upon your details mix design and tools. Constantly test tiny sets prior to full-blown manufacturing to validate performance.

Storage and Handling

Shop in a trendy, dry area away from straight sunlight. Keep containers firmly closed when not in use. The service life is 12 months in original sealed packaging. If the item ices up, thaw it totally and mix well before usage. Prevent contact with eyes and skin. Usage gloves and shatterproof glass throughout handling.

Applications of High Dilution Surfactant Protein Liquid Concrete Foaming Agent for Foam Concrete

Applications of High Dilution Surfactant Healthy Protein Fluid Concrete Lathering Representative

Lightweight and Insulating Foam Concrete

This lathering representative develops steady, great air bubbles in concrete mixtures. The result is lightweight foam concrete with excellent thermal insulation. Contractors use it for roofing decks, wall surface panels, and floor loads where weight reduction issues. The product likewise helps reduced cooling and heating prices in structures.

Gap Filling and Geotechnical Projects

Service providers rely upon this product to fill underground voids, deserted pipes, or utility trenches. The foam concrete flows easily right into limited rooms without needing vibration. It solidifies swiftly and adds minimal lots to surrounding soil. This makes it ideal for roadway fixings, bridge joints, and incline stabilization job.

Precast Building Components

Manufacturers mix the foaming agent into precast blocks, panels, and blocks. The end products are lighter than typical concrete however still solid sufficient for non-load-bearing wall surfaces. These components speed up on-site setting up and lower transport prices.

Fireproof Structure Elements

Foam concrete made with this representative has reduced thermal conductivity. That residential or commercial property reduces heat transfer during a fire. Designers choose it for firewalls, partition wall surfaces, and protective cladding around architectural steel.

Sound-Absorbing Frameworks

The closed-cell framework of the foam traps acoustic waves. This decreases sound transmission between areas or from outdoors traffic. Architects define it for schools, health centers, and domestic structures that need peaceful interiors.

Lasting Construction Practices

The foaming representative collaborates with average Portland concrete and typical aggregates. It requires no unique tools. Users can dilute it heavily while maintaining efficiency constant. This cuts product waste and sustains greener structure approaches without increasing intricacy or expense.

Company Profile

We are the global leader in lightweight concrete and advanced engineered foam solutions. Known globally for its commitment to research, innovation, and applied expertise, we have been providing engineered foam solutions since the early 2012’s.

We can supply high-quality concrete admixture and foam concrete related products all over the world.

The company has a professional technical department and quality supervision department, a well-equipped laboratory, and equipped with advanced testing equipment and after-sales customer service center.

If you are interested, please feel free and contact us.

Payment

T/T, Western Union, Paypal, Credit Card etc.

Shipment

By air, by sea, by express, as customers request.

5 FAQs of High Dilution Surfactant Protein Liquid Concrete Foaming Agent for Foam Concrete

Frequently Asked Questions

What is this foaming agent used for?

This high dilution surfactant protein liquid is used to make foam concrete. It creates stable air bubbles in the cement mix. These bubbles lower the density of the final product and improve insulation. Builders use it for lightweight walls, roof fills, and floor leveling.

How do you mix it with water?

You mix the foaming agent with clean water before adding it to the cement. The usual ratio is 1 part agent to 30–50 parts water. Always follow the instructions on the label. Use a foam generator to create uniform bubbles. Poor mixing leads to weak or uneven foam.

Is it safe to handle?

Yes, this product is non-toxic and biodegradable. Still, wear gloves and eye protection when handling it. Avoid swallowing or breathing the mist. Store it in a cool, dry place away from direct sunlight. Keep it out of reach of children.

Why choose a high dilution formula?

High dilution means you use less product per batch. This cuts material costs and shipping weight. It also gives better control over foam quality. The bubbles stay stable longer, which helps the concrete set evenly without collapsing.

Can it work in cold weather?

It works best between 5°C and 35°C (41°F–95°F). In very cold conditions, the foam may break down faster. If you must work in low temperatures, warm the mixing water slightly. Never freeze the liquid—this can damage its performance. Test a small batch first if the weather is extreme.