Overview of High Foam Stability Liquid Surfactant Concrete Foaming Agent for Lightweight Concrete

High Foam Stability Liquid Surfactant Concrete Foaming Agent for Lightweight Concrete is a surfactant that generates large quantities of uniform, stable foam through physical or chemical means. When this foam is thoroughly mixed with cement-based slurry (cement, fly ash, etc.) and cured naturally or with steam, it forms a novel lightweight material—foam concrete—internally filled with numerous closed air cells.

Features of High Foam Stability Liquid Surfactant Concrete Foaming Agent for Lightweight Concrete

1. High Foam Multiplication Ratio: High foam multiplication ratio allows for dilution before use. One kilogram of concentrate generates a large volume of uniform foam, delivering significant cost savings.

2. Strong Foam Stability: Produces resilient, uniformly fine foam walls that resist collapse or breakage. Effectively withstands pressure from cement slurry, ensuring independent and sealed air cells within the finished product.

3. Uniform and Fine Pore Structure: The foam concrete exhibits an ideal internal structure of closed spherical micro-pores, guaranteeing superior physical properties.

4. Low Material Consumption: Achieves equivalent density and strength grades with lower dosage than standard market products, reducing costs.

5. Eco-friendly and safe: Neutral formulation, non-toxic, odorless, and non-corrosive, posing no harm to the environment or human health. Classified as a green building material.

6. Wide adaptability: Excellent compatibility with various cements (including ordinary Portland cement and aluminate cement) and admixtures. Rapid foaming action with extended foam stability.

Specifications of High Foam Stability Liquid Surfactant Concrete Foaming Agent for Lightweight Concrete

High Foam Stability Fluid Surfactant Concrete Foaming Representative

Product Introduction

This fluid surfactant is particularly made for producing lightweight concrete. It develops secure, uniform foam that blends quickly into concrete slurry. The result is solid, light-weight concrete with regular air cell structure.

Secret Specifications

Appearance: Clear to light brownish-yellow fluid
Density: 1.02– 1.08 g/cm four at 25 ° C.
pH Worth: 6.5– 8.0 (in 1% aqueous solution).
Solubility: Completely soluble in water.
Foam Reproduction Proportion: ≥ 20:1.
Drainage Half-Life: ≥ 45 mins.
Strong Web content: 30– 35%.

Performance Features

The frothing agent produces penalty, closed-cell bubbles that do not collapse during blending or pouring. This offers the concrete good workability and reduces partition. The foam remains stable enough time for appropriate positioning and healing. It works well with normal Portland cement and usual admixtures. No extra equipment is needed– simply include water and mix customarily.

Use Guidelines

Dilute the agent with clean water at a proportion of 1:30 to 1:50 prior to use. Include the diluted solution to the lathering equipment to produce foam. Then mix the foam into the cement slurry. Dosage depends upon the target thickness of the end product. Common dosage varieties from 0.3% to 0.8% by weight of cement. Always examination small sets initially to adjust for regional products and problems.

Storage and Handling

Shop in a trendy, completely dry location far from straight sunlight. Maintain container firmly closed when not in use. Life span is 12 months in initial packaging. Avoid freezing. Wear handwear covers and eye security during handling. Wash promptly with water if call takes place.

Applications of High Foam Stability Liquid Surfactant Concrete Foaming Agent for Lightweight Concrete

Applications of High Foam Stability Fluid Surfactant Concrete Foaming Agent

Why Foam Stability Matters in Lightweight Concrete

Light-weight concrete requirements stable air bubbles to remain solid and light. A high foam security fluid surfactant concrete lathering representative develops these bubbles and keeps them from damaging too soon. This assists the concrete maintain its form and framework throughout blending, putting, and treating.

Key Uses in Building And Construction

This lathering agent functions well in making frothed concrete blocks and precast panels . Contractors utilize these products for wall surfaces, roof coverings, and insulation due to the fact that they are light and save power. The secure foam makes sure also appearance and constant thickness across every batch.

It is additionally utilized in flooring leveling and void filling up . When specialists put lightweight concrete into voids or under pieces, the foam should hold up under pressure. The surfactant maintains the bubbles company so the mix does not collapse or diminish.

In roadway sub-bases and trench backfill , this agent assists generate flowable fill that is simple to location yet still solid sufficient to sustain loads. The foam stays intact long enough for the cement to establish, providing dependable performance without hefty compaction.

Advantages on Website

Utilizing this liquid surfactant means less blunders and much less waste. Workers get a smooth, practical mix each time. The bubbles do not stand out early, so the final product has consistent cells and far better insulation. That brings about reduced material costs , much faster project timelines , and much less labor effort .

The item blends easily with water and standard cement. No unique devices are needed. It works in warm or cold weather, that makes it valuable year-round. Contractors trust it because it supplies foreseeable results on every task.

Company Profile

We are the global leader in lightweight concrete and advanced engineered foam solutions. Known globally for its commitment to research, innovation, and applied expertise, we have been providing engineered foam solutions since the early 2012’s.

We can supply high-quality concrete admixture and foam concrete related products all over the world.

The company has a professional technical department and quality supervision department, a well-equipped laboratory, and equipped with advanced testing equipment and after-sales customer service center.

If you are interested, please feel free and contact us.

Payment

T/T, Western Union, Paypal, Credit Card etc.

Shipment

By air, by sea, by express, as customers request.

5 FAQs of High Foam Stability Liquid Surfactant Concrete Foaming Agent for Lightweight Concrete

Frequently Asked Questions

What is this foaming agent used for?

This liquid surfactant creates stable foam for lightweight concrete. Builders mix it with cement and water to make concrete that weighs less but still holds strength. It works well in precast panels, blocks, and insulation fills.

Why does foam stability matter?

Stable foam keeps air bubbles evenly spread in the mix. If foam breaks too soon, the concrete becomes uneven or too dense. Our agent holds bubbles strong during mixing and pouring. This gives you consistent texture and reliable performance every time.

How do I use it?

Dilute the agent with water as directed. Then feed it into a foam generator to produce fine, uniform bubbles. Mix those bubbles into your cement slurry right away. Follow your project’s mix design for best results. Always test small batches first.

Is it safe for workers and the environment?

Yes. The product contains no harsh solvents or toxic additives. It meets standard safety guidelines for construction chemicals. Still, wear gloves and eye protection when handling. Store it in a cool, dry place away from direct sunlight.

Can it work in different weather conditions?

It performs well in normal temperatures. In very cold or hot weather, adjust water temperature or dosage slightly. Cold slows foam formation; heat may shorten foam life. Small tweaks keep results steady year-round. Always check local conditions before starting big pours.