Overview of High Stability Synthetic Surfactant Concrete Foaming Agent for Export Quality CLC

High Stability Synthetic Surfactant Concrete Foaming Agent for Export Quality CLC is a surfactant that generates large quantities of uniform, stable foam through physical or chemical means. When this foam is thoroughly mixed with cement-based slurry (cement, fly ash, etc.) and cured naturally or with steam, it forms a novel lightweight material—foam concrete—internally filled with numerous closed air cells.

Features of High Stability Synthetic Surfactant Concrete Foaming Agent for Export Quality CLC

1. High Foam Multiplication Ratio: High foam multiplication ratio allows for dilution before use. One kilogram of concentrate generates a large volume of uniform foam, delivering significant cost savings.

2. Strong Foam Stability: Produces resilient, uniformly fine foam walls that resist collapse or breakage. Effectively withstands pressure from cement slurry, ensuring independent and sealed air cells within the finished product.

3. Uniform and Fine Pore Structure: The foam concrete exhibits an ideal internal structure of closed spherical micro-pores, guaranteeing superior physical properties.

4. Low Material Consumption: Achieves equivalent density and strength grades with lower dosage than standard market products, reducing costs.

5. Eco-friendly and safe: Neutral formulation, non-toxic, odorless, and non-corrosive, posing no harm to the environment or human health. Classified as a green building material.

6. Wide adaptability: Excellent compatibility with various cements (including ordinary Portland cement and aluminate cement) and admixtures. Rapid foaming action with extended foam stability.

Specifications of High Stability Synthetic Surfactant Concrete Foaming Agent for Export Quality CLC

High Stability Synthetic Surfactant Concrete Foaming Agent – Export Quality for CLC

Product Overview

This foaming agent is made for producing high-quality Cellular Lightweight Concrete (CLC). It uses a synthetic surfactant base that gives strong, stable foam. The foam holds its shape well during mixing and pouring. This helps create uniform air cells in the final concrete product.

Key Specifications

Density: 1.02–1.05 g/cm³ at 25°C
pH Value: 6.5–7.5 (neutral range)
Solubility: Fully soluble in water
Foam Expansion Ratio: 20:1 to 30:1
Drainage Half-Life: Over 60 minutes
Storage Stability: No separation or sedimentation for up to 12 months when stored properly

Performance Features

The agent creates fine, closed air bubbles that stay intact under pressure. This leads to consistent density and strength in CLC blocks or panels. It works well with ordinary Portland cement and common additives. No extra equipment is needed—just mix with water as directed.

The formula resists hard water and performs reliably across different temperatures. It also reduces surface tension quickly, which helps foam form fast and evenly. Builders get smooth, crack-free CLC every time.

Usage Guidelines

Use 1 part foaming agent to 30–50 parts clean water. Mix with an air compressor or foam generator to produce stable foam. Add the foam directly into the cement slurry while mixing. Dosage may vary based on desired concrete density and local conditions. Always test small batches first.

Store in a cool, dry place away from direct sunlight. Keep container sealed when not in use. Avoid freezing. The product meets international standards for construction chemicals and is ready for export packaging.

Applications of High Stability Synthetic Surfactant Concrete Foaming Agent for Export Quality CLC

High Stability Synthetic Surfactant Concrete Foaming Agent for Export-Quality CLC

Reliable Performance in Every Batch

This synthetic surfactant foaming agent delivers consistent results for Cellular Lightweight Concrete (CLC). It creates stable, uniform air bubbles during mixing. The foam stays intact under pressure and does not collapse before the concrete sets. This ensures even density and strong structural integrity in the final product.

Built for Demanding Export Standards

Manufacturers use this foaming agent to meet strict international quality requirements. It works well across different water types and temperatures. The formula resists hard water and maintains performance in varied climates. This makes it ideal for global projects where reliability matters.

Easy to Use, Efficient Results

The agent mixes quickly with water using standard foam generators. Only a small amount is needed per batch, which lowers material costs. It produces fine, closed-cell foam that improves insulation and reduces weight without sacrificing strength. Contractors see smoother pours and fewer surface defects.

Supports Sustainable Construction

Lightweight concrete made with this agent uses less cement and aggregate. That cuts down on raw material use and transportation weight. The end product offers better thermal insulation, helping buildings use less energy over time. These benefits align with green building goals worldwide.

Key Features:
– High foam stability and long drainage time
– Low dosage requirement
– Compatibility with common cement types
– Consistent bubble size for uniform concrete texture
– Non-toxic and safe for on-site handling

This foaming agent is trusted by producers who supply CLC blocks, panels, and precast elements to markets in Europe, the Middle East, and Southeast Asia. Its dependable action helps avoid costly rework and delays on job sites.

Company Profile

We are the global leader in lightweight concrete and advanced engineered foam solutions. Known globally for its commitment to research, innovation, and applied expertise, we have been providing engineered foam solutions since the early 2012’s.

We can supply high-quality concrete admixture and foam concrete related products all over the world.

The company has a professional technical department and quality supervision department, a well-equipped laboratory, and equipped with advanced testing equipment and after-sales customer service center.

If you are interested, please feel free and contact us.

Payment

T/T, Western Union, Paypal, Credit Card etc.

Shipment

By air, by sea, by express, as customers request.

5 FAQs of High Stability Synthetic Surfactant Concrete Foaming Agent for Export Quality CLC

Frequently Asked Questions: High Stability Synthetic Surfactant Concrete Foaming Agent for Export-Quality CLC

What is this foaming agent used for?

This foaming agent creates stable, uniform air bubbles in cement mixtures. It is specially designed for producing high-quality Cellular Lightweight Concrete (CLC). The foam it generates helps reduce concrete density while keeping strength and insulation properties strong.

Why choose a synthetic surfactant over protein-based agents?

Synthetic surfactants offer better foam stability and consistency. They work well in different water qualities and temperatures. Unlike protein-based types, they do not break down easily. This means your CLC blocks or panels will have even texture and fewer defects.

Is this product suitable for export markets?

Yes. This foaming agent meets international standards for performance and safety. It has been tested in various climates and production setups. Many overseas manufacturers use it to make CLC that passes strict quality checks.

How much foaming agent should I use?

Dosage depends on your mix design and desired density. A typical range is 1–2% by weight of water used in the foam solution. Always run small trials first. Adjust the amount based on foam stability and final concrete results.

Does it affect the setting time or strength of CLC?

No major impact. When used correctly, this agent does not delay setting or weaken the concrete. In fact, it helps create a more uniform pore structure, which can improve compressive strength at low densities. Just follow recommended mixing procedures for best results.