Bezprašné 10mm 20mm tlusté aerogelové role pro izolaci stěn střechy a podlahy budov

PARAMETRY PRODUKTU

Popis
POŽÁDEJTE O NABÍDKU

Popis

Overview of Dust Free 10mm 20mm Thick Aerogel Rolls for Building Wall Roof and Floor Insulation

Dust Free 10mm 20mm Thick Aerogel Rolls for Building Wall Roof and Floor Insulation is a synthetic porous ultralight material derived from a gel, ve kterém byla kapalná složka nahrazena plynem. Výsledkem je pevná látka s extrémně nízkou hustotou a nízkou tepelnou vodivostí, často přezdívaný “zmrzlý kouř.” Navzdory svému křehkému vzhledu, může být navržen tak, aby byl pozoruhodně silný, drží titul nejlepšího izolačního pevného materiálu na světě.

Features of Dust Free 10mm 20mm Thick Aerogel Rolls for Building Wall Roof and Floor Insulation

  • Nejnižší tepelná vodivost na světě: Poskytuje bezkonkurenční izolační výkon, mnohem lepší než tradiční materiály.

  • Extrémně nízká hustota: Jeden z nejlehčích pevných materiálů, které člověk zná, se složením až 99.8% vzduch.

  • Vysoká plocha povrchu: Má neuvěřitelně velkou vnitřní plochu, což je cenné pro filtrační a absorpční aplikace.

  • Všestranné složení: Lze vyrobit z různých materiálů, včetně oxidu křemičitého, uhlík, a oxidy kovů, každý s jedinečnými vlastnostmi.

  • Výjimečná pórovitost: Jeho nanoporézní struktura je zodpovědná za jeho vynikající izolační schopnosti.

    Aerogelový povlak

Dust Free 10mm 20mm Thick Aerogel Rolls for Building Wall Roof and Floor Insulation
Bezprašné 10mm 20mm tlusté aerogelové role pro izolaci stěn střechy a podlahy budov

Specifications of Dust Free 10mm 20mm Thick Aerogel Rolls for Building Wall Roof and Floor Insulation

Specifications of Dust-Free 10mm & 20mm Thick Aerogel Rolls

Shrnutí položky

These aerogel insulation rolls are produced walls, střechy, and floorings in structures. They can be found in 2 basic thicknesses: 10mm and 20mm . Materiál je pružný, lehký, and completely dust-free , so it remains clean during handling and installation.

Funkce triku

Ultra nízká tepelná vodivost: The rolls offer exceptional warm resistance. Jejich tepelná vodivost je snížena jako 0.015 W/( m · K) , which helps in reducing energy loss.
Flexible and simple to cut: You can form the rolls with fundamental devices. They fit tightly around pipes, okraje, or uneven surfaces without voids.
Hydrofobní povrch: Water does not saturate right into the product. This keeps insulation performance stable even in damp problems.
No dirt or fibers: Na rozdíl od standardní izolace, these rolls do not release bits right into the air. That makes them risk-free for interior usage and easier to install without protective gear.
Dlouhá životnost: The aerogel structure stays intact in time. It stands up to aging, komprese, a přímé chemické expozice.

Technické údaje

– Density choices: 10 mm or 20 mm .
– Standard roll size: 1,200 mm .
– Roll size: 10 metrů (personalized sizes readily available).
– Tloušťka: Přibl. 180– 220 kg/m ČTYŘI .
– Max continuous use temperature: Přibližně 650 °C .
– Fire skóre: Nehořlavý (třída A) .
– Vapor leaks in the structure: Snížená, but enables controlled moisture movement .

Aplikace

Make use of these rolls in domestic and industrial tasks. They work well in outside wall surfaces, attic roofing systems, podlahové systémy, and a/c duct covers. The dust-free design makes them perfect for clean settings like medical facilities, laboratoří, and homes where air high quality matters.

Dust Free 10mm 20mm Thick Aerogel Rolls for Building Wall Roof and Floor Insulation
Bezprašné 10mm 20mm tlusté aerogelové role pro izolaci stěn střechy a podlahy budov

Applications of Dust Free 10mm 20mm Thick Aerogel Rolls for Building Wall Roof and Floor Insulation

Applications of Dust-Free 10mm and 20mm Thick Aerogel Rolls

Superior Insulation for Walls, Střechy, a Podlahy

Dust-free aerogel rolls in 10mm and 20mm densities provide top-tier thermal insulation for buildings. These rolls are soft, adaptabilní, and easy to reduce. They fit securely right into wall surface tooth cavities, roofing spaces, and floor systems without leaving spaces. This limited fit quits heat from running away in winter season and maintains interior spaces cool down in summer season.

Why building contractors choose aerogel rolls:
They supply superb performance even in thin layers. A 10mm roll offers insulation comparable to much thicker conventional materials like fiberglass or mineral woollen. The 20mm version provides also much better results where room enables. Both alternatives save room while increasing power effectiveness.

These rolls consist of no loose fragments. That implies no dirt gets into the air during managing or installation. Workers stay safer, and indoor air top quality stays clean– essential for homes, pracovišť, and delicate atmospheres like healthcare facilities or labs.

Where they work best:
Utilize them inside outside wall surfaces to decrease heat loss. Set up under roofing membranes or in between rafters to obstruct solar warm. Lay them under floor covering systems to stop cool from climbing with pieces or crawl rooms. They also execute well in retrofit jobs where including thick insulation isn’t possible.

The material withstands dampness and does not support mold development. It stays reliable over time without clearing up or compressing. Na rozdíl od některých izolantů, it will not shed performance after a few years.

Stavitelé domů, návrháři, and specialists rely upon these aerogel rolls when high performance, limited room, and tidy setup issue most. Whether you’re servicing new building and construction or updating an existing framework, these rolls supply constant, resilient insulation with minimal headache.

Profil společnosti

Jsme světovým lídrem v oblasti lehkého betonu a pokročilých řešení inženýrské pěny. Celosvětově známý pro svůj závazek k výzkumu, inovace, a aplikované odbornosti, od počátku roku 2012 poskytujeme umělá pěnová řešení.

Jsme schopni dodávat vysoce kvalitní přísady do betonu a výrobky související s pěnovým betonem po celém světě.

Společnost disponuje odborným technickým oddělením a oddělením kontroly kvality, dobře vybavená laboratoř, a vybavené pokročilým testovacím zařízením a poprodejním zákaznickým servisním střediskem.

Pokud máte zájem, neváhejte a kontaktujte nás.

Platba

T/T, Western Union, Paypal, Kreditní karta atd.

Zásilka

Letecky, po moři, expresně, jak zákazníci požadují.

Dust Free 10mm 20mm Thick Aerogel Rolls for Building Wall Roof and Floor Insulation
Bezprašné 10mm 20mm tlusté aerogelové role pro izolaci stěn střechy a podlahy budov

5 FAQs of Dust Free 10mm 20mm Thick Aerogel Rolls for Building Wall Roof and Floor Insulation

Frequently Asked Questions About Dust-Free Aerogel Insulation Rolls

What are these aerogel rolls made of?

These rolls use silica aerogel, jeden z nejlehčích známých pevných materiálů. The material is processed to be dust-free and safe for handling. It comes in 10mm or 20mm thickness options to suit different insulation needs.

Where can I use these rolls?

Můžete je nainstalovat na stěny, střechy, a podlahy. They work well in both new buildings and renovation projects. Their flexibility lets them fit into tight or uneven spaces without losing performance.

Proč zvolit aerogel před jinými izolačními materiály?

Aerogel offers much better thermal resistance per inch than fiberglass or foam. This means you get strong insulation even with thin layers. Odolává také vlhkosti, does not rot, and will not attract pests.

Are these rolls easy to install?

Ano. The rolls are lightweight and can be cut with standard tools like utility knives or scissors. Není potřeba žádné speciální školení. Just place them in position and secure with tape or fasteners as required by your project.

Je tento produkt bezpečný pro vnitřní použití?

Absolutně. These rolls are dust-free, so they do not release particles during or after installation. They contain no harmful chemicals and meet standard building safety codes. You can use them in homes, kanceláře, a veřejné budovy bez obav.

POŽÁDEJTE O NABÍDKU

POŽÁDEJTE O NABÍDKU