Overview of Prepreg Aerogel Felt Double PTFE Belt Compound Flatbed Lamination Machine with Heating and Cooling Zone

Prepreg Aerogel Felt Double PTFE Belt Compound Flatbed Lamination Machine with Heating and Cooling Zone is a synthetic porous ultralight material derived from a gel, ve kterém byla kapalná složka nahrazena plynem. Výsledkem je pevná látka s extrémně nízkou hustotou a nízkou tepelnou vodivostí, často přezdívaný “zmrzlý kouř.” Navzdory svému křehkému vzhledu, může být navržen tak, aby byl pozoruhodně silný, drží titul nejlepšího izolačního pevného materiálu na světě.

Features of Prepreg Aerogel Felt Double PTFE Belt Compound Flatbed Lamination Machine with Heating and Cooling Zone

• Nejnižší tepelná vodivost na světě: Poskytuje bezkonkurenční izolační výkon, mnohem lepší než tradiční materiály.

• Extrémně nízká hustota: Jeden z nejlehčích pevných materiálů, které člověk zná, se složením až 99.8% vzduch.

• Vysoká plocha povrchu: Má neuvěřitelně velkou vnitřní plochu, což je cenné pro filtrační a absorpční aplikace.

• Všestranné složení: Lze vyrobit z různých materiálů, včetně oxidu křemičitého, uhlík, a oxidy kovů, každý s jedinečnými vlastnostmi.

• Výjimečná pórovitost: Jeho nanoporézní struktura je zodpovědná za jeho vynikající izolační schopnosti.

  

  Aerogelový povlak

Specifications of Prepreg Aerogel Felt Double PTFE Belt Compound Flatbed Lamination Machine with Heating and Cooling Zone

Specifications of Prepreg Aerogel Felt Double PTFE Belt Compound Flatbed Lamination Equipment with Cooling And Heating Zone

Core Framework and Style

This lamination device utilizes a flatbed design with dual PTFE belts. The belts run continually to sustain steady material handling. The frame is built from high-strength steel for lasting toughness. All relocating parts are specifically aligned to maintain tension even throughout the full width.

Topení & Cooling System

The machine consists of separate heating and cooling down zones. The home heating section makes use of infrared or warm air systems, v závislosti na modelu. Temperature control is precise within ± 2 °C. The air conditioning zone complies with right after heating. It makes use of forced air or water-cooled rollers to bring products down to risk-free handling temperatures promptly. Operators can set different temperature levels for every zone based on process needs.

Kompatibilita produktu

This system works well with prepreg, aerogel felt, and various other heat-sensitive compounds. The PTFE belts stop sticking and allow smooth launch. The gentle stress and controlled warm help keep the framework of delicate insulation materials like aerogel.

Control and Operation

A touchscreen user interface gives full control over speed, teplotní úroveň, and belt stress. All key criteria show in live. Security functions consist of emergency stop buttons and get too hot protection. The device runs silently and fits into standard production lines without additional room.

Technické detaily

Working size arrays from 600 mm až 1500 mm. Maximum running temperature level gets to 300 °C. Line rate readjusts from 0.5 na 5 metrů za minutu. Power supply is 380 PROTI, 3-fáze, 50/60 Hz. Total power draw depends upon configuration however usually stays under 45 kW. The device considers between 2,500 kg a 4,000 kg, based upon size and options.

Applications of Prepreg Aerogel Felt Double PTFE Belt Compound Flatbed Lamination Machine with Heating and Cooling Zone

Applications of Prepreg Aerogel Felt Dual PTFE Belt Compound Flat Bed Lamination Device with Heating and Cooling Zone

Exact Lamination for High-Performance Insulation Products

This lamination maker is constructed for making high-grade aerogel composites. It uses 2 PTFE belts to bring products with a flatbed system. The layout makes certain also stress and smooth movement during processing. The machine consists of both heating and cooling down areas. This permits exact control over the whole lamination cycle.

Producers use this tools to bond aerogel pitied prepreg layers. Výsledek je solidní, light-weight insulation panel. These panels prevail in aerospace, elektrická vozidla, and building construction. The equipment takes care of delicate aerogel without squashing it. Ve stejnou dobu, it turns on the material in the prepreg under regulated heat.

Secure Efficiency Throughout Industries

The double PTFE belt setup prevents sticking and marks on completed products. It likewise aids preserve consistent thickness from start to finish. Operators can readjust temperature level, rychlost, and pressure based on product needs. The cooling zone secure form and residential or commercial properties right after lamination. This lowers bending and boosts dimensional accuracy.

Companies working with thermal barriers or fire-resistant panels rely upon this device. It supports continuous manufacturing with marginal downtime. Cleansing and maintenance are simple many thanks to the non-stick PTFE surface areas. The system works well with roll-to-roll or sheet-fed input, offering versatility for different operations.

This lamination service meets strict top quality demands in sophisticated production. It delivers uniform bonding, tidy surface areas, and repeatable results set after batch.

Profil společnosti

Jsme světovým lídrem v oblasti lehkého betonu a pokročilých řešení inženýrské pěny. Celosvětově známý pro svůj závazek k výzkumu, inovace, a aplikované odbornosti, od počátku roku 2012 poskytujeme umělá pěnová řešení.

Jsme schopni dodávat vysoce kvalitní přísady do betonu a výrobky související s pěnovým betonem po celém světě.

Společnost disponuje odborným technickým oddělením a oddělením kontroly kvality, dobře vybavená laboratoř, a vybavené pokročilým testovacím zařízením a poprodejním zákaznickým servisním střediskem.

Pokud máte zájem, neváhejte a kontaktujte nás.

Platba

T/T, Western Union, Paypal, Kreditní karta atd.

Zásilka

Letecky, po moři, expresně, jak zákazníci požadují.

5 FAQs of Prepreg Aerogel Felt Double PTFE Belt Compound Flatbed Lamination Machine with Heating and Cooling Zone

Často kladené otázky

K čemu slouží tento stroj?

This machine bonds prepreg aerogel felt with double-sided PTFE belts. It creates flat, uniform laminates for insulation and aerospace parts. The heating and cooling zones help control the process precisely.

How does the heating and cooling system work?

The machine has separate heating and cooling zones. Heating softens the materials so they stick together well. Cooling sets the bond quickly and keeps the final product stable. Temperature in each zone can be adjusted to match your material needs.

Zvládne různé tloušťky?

Ano. The machine works with various thicknesses of aerogel felt and PTFE belts. You just need to set the right pressure and temperature. This flexibility supports many product types without changing hardware.

Je obsluha snadná?

The controls are simple and user-friendly. Operators can adjust speed, teplota, and pressure from a central panel. Basic training is enough to run the machine safely and efficiently.

What makes this lamination machine stand out?

It combines heat, tlak, and controlled cooling in one line. This gives strong, consistent bonds without wrinkles or bubbles. The double PTFE belt design protects the material surface and ensures smooth output every time.