Introduction to Hydroxypropyl Methyl Cellulose HPMC Viscosity 35000 sa 45000 Heat Isolation for Decorative Putty

Hydroxypropyl Methylcellulose (HPMC), na ang Chinese na pangalan ay hydroxypropyl methylcellulose, ay isang semi-synthetic, non-ionic cellulose eter na nakuha sa pamamagitan ng chemically modifying natural cellulose. Ang puting pulbos na ito ay maaaring bumuo ng isang transparent na malapot na solusyon pagkatapos matunaw sa tubig. Ito ay may mahusay na pampalapot, pagpapanatili ng tubig, katatagan at mga katangian ng pagbuo ng pelikula. Ito ay isang kailangang-kailangan na multifunctional additive sa maraming larangan tulad ng konstruksiyon.

Characteristics and advantages of Hydroxypropyl Methyl Cellulose HPMC Viscosity 35000 sa 45000 Heat Isolation for Decorative Putty

Napakahusay na solubility sa tubig: Maaari itong mabilis na matunaw sa malamig na tubig upang bumuo ng isang malinaw at matatag na solusyon.

Mahusay na pampalapot at kakayahan sa pagpapanatili ng tubig: Dagdagan ang lagkit ng materyal, epektibong bawasan ang pagsingaw ng tubig, at pagbutihin ang kahusayan sa trabaho.

Magandang katatagan: Ito ay may mahusay na katatagan sa mga acid, alkalis, at mga asin, at angkop para sa malawak na hanay ng mga halaga ng pH.

Mga epekto sa pagbuo ng pelikula at proteksyon: Pagkatapos matuyo, ito ay bumubuo ng isang matigas at transparent na pelikula upang protektahan ang substrate at maiwasan ang pagtagos ng tubig at pagsingaw.

Non-toxic at hindi nakakairita: Ito ay may mahusay na biocompatibility at angkop para sa mga larangan ng medisina at pagkain.

Pagsasaayos: Sa pamamagitan ng pagbabago ng antas ng pagpapalit at molekular na timbang, ang pagganap nito ay maaaring iakma upang matugunan ang iba't ibang mga kinakailangan sa aplikasyon.

Specifications of Hydroxypropyl Methyl Cellulose HPMC Viscosity 35000 sa 45000 Heat Isolation for Decorative Putty

Hydroxypropyl Methyl Cellulose (HPMC)– Viscosity 35,000– 45,000 mPa ·

s Trick Specs for Attractive Putty Applications

This quality of Hydroxypropyl Methyl Cellulose (HPMC) uses a viscosity variety of 35,000 sa 45,000 mPa · s (sinusukat sa 2% serbisyo, 20 ° C). It is specifically developed for usage in decorative putty solutions where solid water retention and smooth workability are needed.

Tingnan mo: Puti hanggang beige na free-flowing powder
Dampness na materyal: ≤ 5%.
halaga ng pH (2% serbisyo): 6.0– 8.0.
Temperatura ng gel: 58– 62 ° C.
Materyal na abo: ≤ 5%.
laki ng bit: Travels through 80-mesh filter (≥ 98%).

The item liquifies quickly in cold water without forming swellings. It provides putty blends exceptional uniformity and helps protect against sagging on upright surfaces. Its high water retention keeps the mixture damp longer, which supports proper cement hydration and improves attachment to walls.

HPMC with this thickness degree additionally enhances the putty’s warmth isolation performance. It forms a secure movie that lowers thermal conductivity, making indoor wall surfaces much more comfy in both cold and hot weather. This attribute is especially beneficial in regions with large temperature level swings.

Bukod pa rito, the item enhances open time throughout application. Workers get more time to spread out and smooth the putty prior to it starts to establish. The outcome is an uniform finish with fewer surface area defects.

Ang espasyo sa imbakan ay simple. Panatilihin ang pulbos sa isang tuyo, awesome place away from wetness. Malinis ang paggamit, dry tools when handling to stay clear of clumping. Service life is twelve month when kept appropriately in initial covered packaging.

This HPMC quality meets worldwide quality criteria and includes no damaging additives. It works well with usual putty active ingredients like calcium carbonate, redispersible polymer powders, and starch ethers.

Applications of Hydroxypropyl Methyl Cellulose HPMC Viscosity 35000 sa 45000 Heat Isolation for Decorative Putty

Hydroxypropyl Methyl Cellulose (HPMC) for Attractive Putty

High-Viscosity HPMC: 35,000– 45,000 mPa ·

s This quality of Hydroxypropyl Methyl Cellulose (HPMC) is created decorative putty utilized in wall completing. Its thickness series of 35,000 sa 45,000 mPa · s gives the putty strong workability and smooth application. The product helps keep water inside the mix much longer. This allows cement or gypsum hydrate totally, which implies far better toughness and adhesion.

Boosts Workability
The putty ends up being simple to spread with a trowel. It remains smooth without dragging or tearing. Workers can complete big wall surface areas quicker with less effort. The mix also stands up to drooping on upright surface areas, also when applied thick.

Boosts Water Retention
Good water retention stops the putty from drying as well fast. Rapid drying out causes fractures and weak spots. Sa HPMC, moisture stays in location long enough for appropriate treating. This is especially valuable in hot weather or on completely dry, permeable walls.

Includes Warm Isolation
HPMC forms a thin film that decreases heat transfer. This includes a tiny but helpful layer of thermal resistance to interior walls. While not a complete insulation solution, it helps reduce surface area temperature swings and boosts convenience.

Maintains the Mix Steady
The putty stays attire throughout storage and use. Active ingredients do not different. Batches continue to be constant from beginning to end. This reduces waste and remodel on work websites.

Ligtas at Maaasahan
HPMC is safe and odorless. It fulfills usual structure material security criteria. It functions well with various other ingredients like redispersible powders, mga starch eter, at mga tagapuno. No special handling is needed.

Contractors and makers select this HPMC quality since it provides stable performance in real-world conditions. It makes attractive putty simpler to make use of, extra durable, and much better matched for contemporary indoor coatings.

Profile ng Kumpanya

Kami ang pandaigdigang nangunguna sa magaan na kongkreto at advanced engineered foam solution. Kilala sa buong mundo para sa kanyang pangako sa pananaliksik, pagbabago, at inilapat na kadalubhasaan, nagbibigay kami ng mga engineered foam solution mula noong unang bahagi ng 2012.

Makakapagbigay kami ng de-kalidad na kongkretong admixture at mga produktong nauugnay sa foam concrete sa buong mundo.

Ang kumpanya ay may isang propesyonal na departamentong teknikal at departamento ng pangangasiwa ng kalidad, isang mahusay na kagamitang laboratoryo, at nilagyan ng advanced na kagamitan sa pagsubok at after-sales customer service center.

Kung interesado ka, mangyaring huwag mag-atubiling at makipag-ugnayan sa amin.

Pagbabayad

T/T, Western Union, Paypal, Credit Card atbp.

Pagpapadala

Sa pamamagitan ng hangin, sa pamamagitan ng dagat, sa pamamagitan ng express, bilang kahilingan ng mga customer.

5 FAQs of Hydroxypropyl Methyl Cellulose HPMC Viscosity 35000 sa 45000 Heat Isolation for Decorative Putty

Mga Madalas Itanong Tungkol sa HPMC Viscosity 35000–45000 para sa Decorative Putty

Ano ang gamit ng HPMC na may lagkit 35000–45000 sa decorative putty?

This grade of Hydroxypropyl Methyl Cellulose (HPMC) works well in decorative putty. It gives the putty good water retention, strong adhesion, and smooth workability. These qualities help the putty stick better to walls and dry evenly without cracks.

Bakit pipiliin ang partikular na hanay ng lagkit na ito?

Lagkit sa pagitan 35000 at 45000 mPa·s offers a balanced performance. It is thick enough to prevent sagging on vertical surfaces but not so thick that it becomes hard to mix or apply. This makes the putty easy to spread while keeping its shape during drying.

How does HPMC improve heat isolation?

Ang HPMC mismo ay hindi isang heat insulator. Gayunpaman, it helps create a uniform putty layer that bonds tightly to the wall. Isang makinis, crack-free surface reduces air gaps. This supports better overall thermal performance when used with other insulation materials.

Is this HPMC suitable for both interior and exterior putty?

Oo. This HPMC grade performs reliably in both indoor and outdoor applications. It resists temperature changes and maintains stability in humid or dry conditions. Always follow the manufacturer’s mixing instructions for best results.

How much HPMC should be added to the putty mix?

Ang karaniwang dosis ay 0.2% sa 0.4% by total dry weight of the mixture. Ang eksaktong halaga ay depende sa iyong formula, klima, and desired texture. Start with a small batch to test performance before full-scale use. Too much HPMC can slow drying; too little may reduce workability and adhesion.