Overview of Concrete Foaming Agent for Lightweight Concrete in Wall Casting and Formwork

Concrete Foaming Agent for Lightweight Concrete in Wall Casting and Formwork is a surfactant that generates large quantities of uniform, busa stabil melalui cara fisik atau kimia. Saat busa ini tercampur rata dengan bubur berbahan dasar semen (semen, abu terbang, dll.) dan disembuhkan secara alami atau dengan uap, ia membentuk bahan ringan baru—beton busa—yang bagian dalamnya diisi dengan banyak sel udara tertutup.

Features of Concrete Foaming Agent for Lightweight Concrete in Wall Casting and Formwork

1. Rasio Penggandaan Busa Tinggi: Rasio penggandaan busa yang tinggi memungkinkan pengenceran sebelum digunakan. Satu kilogram konsentrat menghasilkan busa seragam dalam jumlah besar, memberikan penghematan biaya yang signifikan.

2. Stabilitas Busa yang Kuat: Menghasilkan ketahanan, dinding busa halus seragam yang tahan terhadap keruntuhan atau kerusakan. Secara efektif menahan tekanan dari bubur semen, memastikan sel udara independen dan tertutup di dalam produk jadi.

3. Struktur Pori Seragam dan Halus: Beton busa menunjukkan struktur internal ideal pori-pori mikro berbentuk bola tertutup, menjamin sifat fisik yang unggul.

4. Konsumsi Bahan Rendah: Mencapai tingkat kepadatan dan kekuatan yang setara dengan dosis lebih rendah dari produk pasar standar, mengurangi biaya.

5. Ramah lingkungan dan aman: Formulasi netral, tidak beracun, tidak berbau, dan tidak korosif, tidak membahayakan lingkungan atau kesehatan manusia. Diklasifikasikan sebagai bahan bangunan ramah lingkungan.

6. Kemampuan beradaptasi yang luas: Kompatibilitas luar biasa dengan berbagai semen (termasuk semen Portland biasa dan semen aluminat) dan bahan tambahan. Tindakan berbusa cepat dengan stabilitas busa yang lebih lama.

Specifications of Concrete Foaming Agent for Lightweight Concrete in Wall Casting and Formwork

Specifications of Concrete Foaming Agent for Lightweight Concrete in Wall Surface Casting and Formwork

Ringkasan Barang

This foaming representative is created creating light-weight concrete utilized in wall surface casting and formwork. Ini menciptakan stabil, gelembung udara yang konsisten di dalam campuran beton. Hasilnya lebih ringan, extra protecting wall surface structure that still satisfies toughness requirements.

Fitur Trik

Keamanan busa yang tinggi: The agent maintains air bubbles undamaged during blending, penuangan, dan mengobati. This avoids collapse or uneven thickness.
Diperlukan dosis rendah: Just a small amount is needed per set, which helps manage expenses without sacrificing efficiency.
Kesesuaian: Berfungsi baik dengan beton kota Rose normal, pasir, dan campuran umum. Tidak diperlukan alat unik.
Hasil yang konsisten: Provides trusted thickness and workability throughout various batches and job sites.

Spesifikasi Teknis

– Lihat: Light amber liquid
– Kepadatan: 1.02– 1.05 g/cm empat jam 20 °C.- nilai pH: 6.5– 8.0.
– Konten padat: 28– 32%.
– Tingkat dosis: 0.3– 0.8% berdasarkan berat beton (readjust based upon target thickness).
– Rasio pertumbuhan busa: 20:1 ke 30:1.
– Waktu drainase air: Lebih 60 menit (measured by conventional cyndrical tube examination).

Gunakan Petunjuk Arah

Mix the foaming agent with water first making use of a foam generator. Add the resulting foam slowly right into the cement slurry while mixing. Do not include the representative directly to completely dry products. Cure the actors wall surface as you would with regular concrete– keep it wet and secured from fast drying. Constantly run a tiny test batch prior to full-scale usage to make improvements water web content and foam volume.

Ruang penyimpanan dan Penanganannya

Berbelanja di tempat yang luar biasa, dry location in between 5 °C dan 35 °C. Jaga agar wadah tetap tertutup rapat saat tidak digunakan. Shelf life is one year from manufacturing date. Cegah pembekuan. Gunakan penutup tangan dan pelindung mata selama penanganan.

Applications of Concrete Foaming Agent for Lightweight Concrete in Wall Casting and Formwork

Applications of Concrete Frothing Representative for Lightweight Concrete in Wall Spreading and Formwork

Why Make Use Of a Foaming Representative?

A concrete frothing representative assists produce light-weight concrete. This type of concrete is easier to manage and positions much less anxiety on structure frameworks. Builders mix the foaming representative right into the concrete batch. It forms little air bubbles that reduce weight without hurting strength way too much.

Wall Casting Made Simpler

When casting wall surfaces, light-weight concrete flows much better right into limited areas. The foam makes the mix a lot more practical. Employees can put it efficiently into formwork with fewer voids or spaces. This causes cleaner wall surface surfaces and much less requirement for patching later on. The lighter weight also indicates staffs can move and raise panels much more safely.

Better Efficiency in Formwork Solutions

Formwork holds damp concrete up until it sets. Hefty blends placed solid pressure on formwork walls. Lightweight concrete made with a lathering representative cuts this stress. That permits building contractors to utilize simpler or multiple-use form systems. It also reduces the threat of kind blowouts throughout pours. The result is faster arrangement, more secure work, and reduced material prices.

Thermal and Sound Benefits

The air bubbles entraped by the foaming agent act like insulation. Wall surfaces cast with this concrete help maintain indoor temperatures steady. They likewise block outside noise better than conventional concrete. These functions matter most in homes, tempat kerja, and colleges where convenience counts.

Easy Combining and Consistent Outcomes

Modern frothing representatives mix evenly with water and concrete. They function well with typical batching equipment. Each batch stays uniform from start to finish. That implies wall sections look and do the exact same throughout big tasks. Service providers obtain dependable high quality without extra steps or unique devices.

Profil Perusahaan

Kami adalah pemimpin global dalam solusi beton ringan dan busa rekayasa canggih. Dikenal secara global karena komitmennya terhadap penelitian, inovasi, dan keahlian terapan, kami telah menyediakan solusi busa rekayasa sejak awal tahun 2012.

Kami dapat menyediakan campuran beton berkualitas tinggi dan produk terkait beton busa di seluruh dunia.

Perusahaan ini memiliki departemen teknis profesional dan departemen pengawasan kualitas, laboratorium yang lengkap, dan dilengkapi dengan peralatan pengujian canggih dan pusat layanan pelanggan purna jual.

Jika Anda tertarik, jangan ragu dan hubungi kami.

Pembayaran

T/T, Serikat Barat, Paypal, Kartu Kredit dll.

Pengiriman

Melalui udara, melalui laut, dengan mengungkapkan, sebagai permintaan pelanggan.

5 FAQs of Concrete Foaming Agent for Lightweight Concrete in Wall Casting and Formwork

Frequently Asked Questions About Concrete Foaming Agent for Lightweight Concrete in Wall Casting and Formwork

Apa itu bahan pembusa beton?

Bahan pembusa beton adalah bahan tambahan cair. Ini menciptakan gelembung udara yang stabil ketika dicampur ke dalam bubur semen. Gelembung-gelembung ini membuat beton lebih ringan dan mudah ditangani. The result is lightweight concrete that still keeps good strength.

Why use foaming agents in wall casting?

Foaming agents reduce the weight of concrete walls. Lighter walls put less stress on foundations and structures. They also improve thermal insulation. Hal ini membantu bangunan tetap sejuk di musim panas dan hangat di musim dingin. Plus, lightweight concrete flows better into formwork, giving smoother finishes.

Bagaimana cara mencampur bahan pembusa dengan benar?

Selalu ikuti instruksi pabriknya. Pertama, dilute the foaming agent with clean water. Kemudian, gunakan generator busa untuk membuat busa yang stabil. Gently blend this foam into the cement mixture. Do not overmix—it can break the bubbles and weaken the final product.

Will lightweight concrete crack more easily?

Not if you use the right mix design. Proper ratios of cement, air, busa, and additives help control shrinkage. Curing the concrete slowly and evenly also reduces cracking. Avoid rapid drying or extreme temperature changes during curing.

Can I use this in all types of formwork?

Ya, lightweight concrete works with wood, baja, and plastic formwork. Its low density puts less pressure on forms during pouring. Tetap, make sure your formwork is clean, tertutup, and strong enough to hold wet concrete until it sets. Always check local building codes before starting your project.