Overview of carbon fiber chopped for concrete 10 mm eriri carbon fiber gbuturu

Maka nguzogide mmetụta dị elu, anyị na-enye Steel Fibers, ezigbo ndochi maka welded waya ntupu na ulo oru ala na tupu nkedo ihe. Anyị na-enyekwa eriri sịntetịtịk Structural pụrụ iche nke na-enye ike tensile dị elu maka ngwa na-achọsi ike. A na-agbasasị eriri ndị a n'otu n'otu n'ime ngwakọta kọmpụta, ịmepụta netwọk nkwado ọtụtụ akụkụ nke usoro ọdịnala na-enweghị ike imezu. Usoro a jikọtara ọnụ na-eme ka owuwu dị mfe, na-eme ka ntinye ngwa ngwa, na enhances n'ozuzu iguzosi ike n'ezi ihe na ogologo ndụ nke ihe, na-enye azịza ọgbara ọhụrụ maka mgbawa mgbawa na ogologo oge.

Features of carbon fiber chopped for concrete 10 mm eriri carbon fiber gbuturu

1. Njikwa mgbapeka dị elu yana ịdịte aka emelitere:

Akụkụ bụ isi nke eriri anyị bụ ikike ha nwere ijikọ ma micro-cracks nke na-etolite n'oge steeti plastik yana mgbawa buru ibu na kọmpụta siri ike.. Mgbasa nke akụkụ atọ a na-emepụta matriks na-ejikọta ọnụ nke na-egbochi mgbasa mgbape. Uru a na-enweta kpọmkwem bụ mbelata dị ukwuu na mgbawa plastic shrinkage na obosara ogologo oge. Nke a na-eduga na a ukwuu ọzọ inogide ihe na ala permeability, nke na-eme ka iguzogide mmiri na-abanye, ifriizi-mebie mmebi, na corrosion nke ígwè ọ bụla agbakwunyere. Ihe si na ya pụta bụ nhazi nke nwere ogologo ndụ ọrụ yana belata ụgwọ ọrụ nlekọta.

2. Mmụba Mmetụta yana Mgbochi Abrasion:

eriri, karịsịa ígwè na siri ike sịntetik nnukwu eriri, na-emeziwanye ike nke ihe siri ike na ịrụ ọrụ mgbe mgbawa gasịrị. Ha na-amịkọrọ ma kesaa ike n'elu mmetụta ma ọ bụ ibu. Njirimara a na-enye abamuru nke elu na-agbanwe agbanwe nke na-adịchaghị mfe spalling, chipping, na abrasion n'okpuru oké okporo ụzọ ma ọ bụ n'ibu eyi. Nke a bụ uru dị oke egwu maka ala ụlọ ọrụ mmepụta ihe, pavement ụlọ nkwakọba ihe, na akụrụngwa akụrụngwa, na-eduga n'elu elu na-eyi ihe siri ike nke na-edobe iguzosi ike n'ezi ihe ya ka oge na-aga.

3. Ịrụ ọrụ nke ọma na ego ego:

Otu akụkụ dị mkpa nke iji nkwado eriri bụ mkpochapụ ntupu eriri welded (WWF) n'ọtụtụ ngwa. Nke a na-enye nnukwu uru na saịtị: ọ na-eme ka ntinye dị mfe, n'ihi na enweghị ntupu a ga-edozi ma ọ bụ nwee ike ịkwapụ, na ọ na-eme ka usoro ihe owuwu ahụ dum dịkwuo elu. Site n'iwepụ nzọụkwụ na-akpa ike, oru ngo na-ahụ mbelata ụgwọ ọrụ na usoro iheomume ngwa ngwa. Nkesa otu nke eriri na-eme ka nkwado na-agbanwe agbanwe na mpaghara kọmpụta niile, n'adịghị ka ntupu, nke enwere ike itinye ya n'ụzọ na-ekwesịghị ekwesị, na-eduga na arụmọrụ a pụrụ ịdabere na ya na nke a pụrụ ịkọ.

Specification of carbon fiber chopped for concrete 10 mm eriri carbon fiber gbuturu

10 mm Chopped Carbon Fiber for Concrete Reinforcement

Nchịkọta ihe

These are short carbon fiber hairs cut to a precise size of 10 millimeters. They are developed to mix directly right into concrete, ngwa agha, or cement-based materials. The fibers help improve toughness, lower cracking, and rise longevity.

Atụmatụ nzuzo

Each hair is made from premium polyacrylonitrile (Ighe pan)- based carbon fiber. The surface area is treated to bond well with concrete. This makes certain the fibers stay locked in place when the concrete sets. Nke 10 mm length provides an excellent equilibrium– enough time to bridge micro-cracks, however short enough to mix equally without clumping.

Fibre anaghị emebi emebi, ire ere, ma ọ bụ corrode. They withstand chemicals, mmiri mmiri, and extreme temperature levels. This makes them optimal for lasting performance in rough atmospheres.

Nkọwa nka nka

– Fiber Length : 10 mm ( ± 0.5 mm).
– Dayameta : About 7– 8 micrometer.
– Ịkwụsị ike : ≥ 3,500 MPa.
– Modul na-agbanwe : ≥ 230 GPA.
– Ọkpụrụkpụ : ~ 1.8 g/cm ise.
– Agba : Nwa.
– Nkwakọ ngwaahịa : 1 n'arọ ma ọ bụ 20 kg secured bags.

Jiri Ụkpụrụ

Tinye eriri ndị ahụ n'oge nhazi ngwakọta. Utilize a typical concrete mixer. Start with a dosage of 0.6– 1.0 n'arọ kwa cubic mita nke ihe. Adjust based on job demands. Gwakọta ma ọ dịkarịa ala 3– 5 minutes after including fibers to make sure even circulation. Enweghị ngwaọrụ pụrụ iche achọrọ. The fibers collaborate with a lot of common admixtures and accumulations.

Constantly adhere to regional building ordinance and perform test batches before full-scale usage. Shop in a dry location away from wetness. Keep bags sealed until ready to make use of.

Applications of carbon fiber chopped for concrete 10 mm eriri carbon fiber gbuturu

Ngwa nke 10 mm Chopped Carbon Fiber in Concrete

Ka ike, Dị Mkpa n'ịdị arọ, and Extra Long lasting Concrete

Gụnyere 10 mm cut carbon fiber hairs to concrete boosts its performance in lots of ways. The fibers blend uniformly into the concrete. They aid control fracturing from the start. This makes the end product extra reliable.

Crack Control and Effect Resistance

Concrete normally establishes little cracks over time. These cracks expand and weaken the framework. Sliced carbon fibers stop these fractures from dispersing. They hold the concrete together also under anxiety. This is especially valuable in floors, okporo ụzọ, and commercial pieces where heavy loads trigger consistent stress.

Boosted Tensile Strength

Simple concrete is strong in compression but weak when drawn or curved. Carbon fiber reinforcement offers it better tensile strength. This means the concrete can deal with flexing pressures without damaging. It works well in thin sections or precast aspects where steel rebar is tough to area.

Corrosion-Free Reinforcement

N'adịghị ka ígwè, eriri carbon adịghị corrosion . This makes it ideal for use in wet or salty settings like bridges, mmiri frameworks, ma ọ bụ ebe a na-adọba ụgbọala. There is no risk of corrosion damage in time. Upkeep costs go down, and life span rises.

Easier Mixing and Placement

Nke 10 mm length is brief enough to blend efficiently with typical tools. It does not glob or sphere up. Specialists find it simple to collaborate with during putting and ending up. Enweghị ngwá ọrụ ma ọ bụ ọzụzụ pụrụ iche achọrọ.

Ejikarị

Home builders use this product in shotcrete, rụkwaa ngwa agha, overlays, and high-performance concrete blends. It additionally functions well in building panels and fire-resistant applications. The fibers include strength without adding much weight. This helps in reducing structural lots and delivery costs.

Okwu Mmalite nke ụlọ ọrụ

Nnọọ na Concrete na ndị ọzọ, onye na-eweta ihe mgbakwunye ihe nrụpụta dị elu, gụnyere ndị na-ebelata mmiri konkịtị anyị. Site na ahụmịhe afọ na ahịa zuru ụwa ọnụ, anyị na-enye ihe ngwọta dị elu e mere iji welie àgwà na arụmọrụ nke ọrụ ihe owuwu n'ụwa nile. Ụlọ ọrụ mmepụta ihe ọgbara ọhụrụ anyị na-eme ka ngwaahịa ndị kachasị mma na-agbaso ụkpụrụ mba ụwa. Anyị na-anya isi na ọrụ ndị ahịa pụrụ iche, nkwado ndị teknuzu, na ahaziri ngwọta iji gboo mkpa ọrụ ngo. Soro anyị maka ntụkwasị obi, ọhụrụ, na-eri-irè ihe admixtures na-akpali gị oru ngo na-aga n'ihu. Chọgharịa ọzọ na www.concreteandmore.de/. Ka anyị wulite ọdịnihu ọnụ!

Ọ bụrụ na ị nwere ajụjụ ọ bụla, biko nweere onwe gị ịkpọtụrụ anyị.

Ụzọ ịkwụ ụgwọ

T/T, Western Union, Paypal, Kaadị kredit wdg.

Ụzọ mbupu

Site n'ikuku, site n'oké osimiri, site na nkwuwa okwu, dị ka ndị ahịa na-arịọ.

5 FAQs of carbon fiber chopped for concrete 10 mm eriri carbon fiber gbuturu

Ajụjụ a na-ajụkarị: 10 mm Chopped Carbon Fiber for Concrete

Gịnị bụ 10 mm chopped carbon fiber used for?

This product is short carbon fiber strands cut to 10 mm n'ogologo. Builders mix it into concrete or mortar. Ọ na-enyere aka ịchịkwa mgbawa, boosts mmetụta iguzogide, ma na-eme ka ịdịte aka n'ozuzu ya dịkwuo mma. Ọ na-arụ ọrụ nke ọma na ala, pavement, precast ihe, na ịrụzi ọrụ.

Kedu ka ọ na-esi emeziwanye ihe?

Mgbe agbakwunyere na nkochi, the fibers spread evenly and form a network inside the mix. This network holds the material together when stress occurs. N'ihi ya, the concrete resists shrinkage cracks better. It also handles sudden loads more effectively without breaking apart.

Kedu ọgwụ m kwesịrị iji?

Usoro ọgwụgwọ a na-ahụkarị sitere na 0.6 ka 1.0 n'arọ kwa cubic mita nke ihe. Ọnụ ego ole dabere na mkpa ọrụ gị. Maka njikwa mgbape isi, 0.6 kg/m³ may be enough. For higher toughness or industrial floors, use up to 1.0 n'arọ/m³. Always follow the manufacturer’s instructions or consult an engineer.

Ọ dị mfe ịgwakọta na konkịtị?

Ee. You can add the fibers during normal batching. Put them in the mixer along with other dry materials before adding water. Mix for at least 3–5 minutes to ensure even distribution. Enweghị akụrụngwa pụrụ iche achọrọ. The fibers won’t clump if mixed properly.

Enwere m ike iji ya na mgbakwunye ndị ọzọ?

Ee. Chopped carbon fiber works well with most common concrete admixtures like plasticizers, superplasticizers, ma ọ bụ ihe ndị na-eme ka ikuku. Just make sure all materials are compatible. Nwalee obere ogbe mbụ ma ọ bụrụ na ị maghị. This avoids unexpected reactions or mixing issues.