Overview of Concrete Mortar Admixture 100% Polyester Micro Fiber

Maka nguzogide mmetụta dị elu, anyị na-enye Steel Fibers, ezigbo ndochi maka welded waya ntupu na ulo oru ala na tupu nkedo ihe. Anyị na-enyekwa eriri sịntetịtịk Structural pụrụ iche nke na-enye ike tensile dị elu maka ngwa na-achọsi ike. A na-agbasasị eriri ndị a n'otu n'otu n'ime ngwakọta kọmpụta, ịmepụta netwọk nkwado ọtụtụ akụkụ nke usoro ọdịnala na-enweghị ike imezu. Usoro a jikọtara ọnụ na-eme ka owuwu dị mfe, na-eme ka ntinye ngwa ngwa, na enhances n'ozuzu iguzosi ike n'ezi ihe na ogologo ndụ nke ihe, na-enye azịza ọgbara ọhụrụ maka mgbawa mgbawa na ogologo oge.

Features of Concrete Mortar Admixture 100% Polyester Micro Fiber

1. Njikwa mgbapeka dị elu yana ịdịte aka emelitere:

Akụkụ bụ isi nke eriri anyị bụ ikike ha nwere ijikọ ma micro-cracks nke na-etolite n'oge steeti plastik yana mgbawa buru ibu na kọmpụta siri ike.. Mgbasa nke akụkụ atọ a na-emepụta matriks na-ejikọta ọnụ nke na-egbochi mgbasa mgbape. Uru a na-enweta kpọmkwem bụ mbelata dị ukwuu na mgbawa plastic shrinkage na obosara ogologo oge. Nke a na-eduga na a ukwuu ọzọ inogide ihe na ala permeability, nke na-eme ka iguzogide mmiri na-abanye, ifriizi-mebie mmebi, na corrosion nke ígwè ọ bụla agbakwunyere. Ihe si na ya pụta bụ nhazi nke nwere ogologo ndụ ọrụ yana belata ụgwọ ọrụ nlekọta.

2. Mmụba Mmetụta yana Mgbochi Abrasion:

eriri, karịsịa ígwè na siri ike sịntetik nnukwu eriri, na-emeziwanye ike nke ihe siri ike na ịrụ ọrụ mgbe mgbawa gasịrị. Ha na-amịkọrọ ma kesaa ike n'elu mmetụta ma ọ bụ ibu. Njirimara a na-enye abamuru nke elu na-agbanwe agbanwe nke na-adịchaghị mfe spalling, chipping, na abrasion n'okpuru oké okporo ụzọ ma ọ bụ n'ibu eyi. Nke a bụ uru dị oke egwu maka ala ụlọ ọrụ mmepụta ihe, pavement ụlọ nkwakọba ihe, na akụrụngwa akụrụngwa, na-eduga n'elu elu na-eyi ihe siri ike nke na-edobe iguzosi ike n'ezi ihe ya ka oge na-aga.

3. Ịrụ ọrụ nke ọma na ego ego:

Otu akụkụ dị mkpa nke iji nkwado eriri bụ mkpochapụ ntupu eriri welded (WWF) n'ọtụtụ ngwa. Nke a na-enye nnukwu uru na saịtị: ọ na-eme ka ntinye dị mfe, n'ihi na enweghị ntupu a ga-edozi ma ọ bụ nwee ike ịkwapụ, na ọ na-eme ka usoro ihe owuwu ahụ dum dịkwuo elu. Site n'iwepụ nzọụkwụ na-akpa ike, oru ngo na-ahụ mbelata ụgwọ ọrụ na usoro iheomume ngwa ngwa. Nkesa otu nke eriri na-eme ka nkwado na-agbanwe agbanwe na mpaghara kọmpụta niile, n'adịghị ka ntupu, nke enwere ike itinye ya n'ụzọ na-ekwesịghị ekwesị, na-eduga na arụmọrụ a pụrụ ịdabere na ya na nke a pụrụ ịkọ.

Specification of Concrete Mortar Admixture 100% Polyester Micro Fiber

Spec of Concrete Mortar Admixture: 100% Polyester Micro Fiber

Nchịkọta ihe

This admixture is made from 100% polyester mini fiber. It is created to boost the performance of concrete and mortar mixes. The fibers dị mma, ekesara otu, and compatible with conventional blending processes. Ha na-enyere aka n'ibelata mgbawa, increase sturdiness, and improve total toughness.

Nzuzo gụnyere

The micro fibers are hydrophobic, so they do not take in water. This maintains the mix water proportion secure. Each fiber has a smooth surface area and consistent diameter, na-adịkarị n'etiti 10 ka 20 microns. The length varies from 6 mm na 12 mm, which fits most building applications.

These fibers disperse quickly in concrete or mortar without clumping. They produce a three-dimensional network inside the mix. This network holds the product together also after cracks begin to form. N'ihi ya, the end product reveals much better influence resistance and much less shrinkage.

Ogo nka nka

– Ngwaahịa: 100% polyester
– Ọkpụrụkpụ: 1.38 g/cm atọ.
– Ịkwụsị ike: ≥ 500 MPa.
– Ihe na-agbaze: gburugburu 256 Celsius C.
– pH kwụsie ike: jobs well in regular cement settings (pH 12– 13).
– Ọnụ ego onunu ogwu: 0.6– 1.2 kg per cubic meter of concrete or mortar.

Ngwa

Utilize this admixture in flooring screeds, smudging mortars, shotcrete, precast ihe, na rụkwaa ngwa agha. It is particularly valuable where split control and boosted surface area integrity are needed. The fibers do not wear away, corrosion, ma ọ bụ na-eweda oge, making them optimal for long-lasting structural use.

Always comply with neighborhood mixing guidelines. Include fibers during the initial stage of blending to guarantee complete dispersion. No special devices is called for. Standard concrete mixers function well.

Applications of Concrete Mortar Admixture 100% Polyester Micro Fiber

Applications of Concrete Mortar Admixture: 100% Polyester Micro Fiber

Boosted Crack Control in Concrete and Mortar

100% polyester micro fiber is commonly utilized to minimize early-age fracturing in concrete and mortar. When blended right into the material, obere eriri ndị a na-agbasa n'otu n'otu na ngwakọta. They hold the structure with each other as it dries out and diminishes. This helps stop small cracks from developing during treating.

Much Better Surface Longevity

Adding polyester mini fiber boosts the surface area toughness of floors, mgbidi, and various other finished surface areas. The fibers act like a surprise support web inside the material. This makes the surface area much more immune to use, mmetụta, na abrasion. It also reduces dusting and scaling gradually.

Suitable for Thin-Section Applications

This admixture functions very well in thin-layer applications such as floor tile adhesives, na-eme, plasta, na rụkwaa ngwa agha ọrụ. Since the fibers are extremely fine, they do not interfere with workability or complete top quality. N'otu oge ahụ kpọmkwem, they increase cohesion and minimize drooping on upright surfaces.

Enhanced Workability and Pumpability

Polyester mini fibers aid keep the mix stable without transforming its flow. Specialists locate the material less complicated to put, trowel, and pump. There is much less risk of partition or blood loss, which brings about much more regular results on website.

Ideal for a Wide Range of Projects

From property flooring to commercial overlays, this admixture fits several construction needs. It is commonly utilized in precast components, stucco, shotcrete, na ihe nlegharị anya nke onwe. The fibers are alkali-resistant and do not wear away, so they last as long as the concrete itself.

100% polyester mini fiber offers an easy, cost-efficient method to upgrade performance without complicated modifications to your mix style or operations.

Okwu Mmalite nke ụlọ ọrụ

Nnọọ na Concrete na ndị ọzọ, onye na-eweta ihe mgbakwunye ihe nrụpụta dị elu, gụnyere ndị na-ebelata mmiri konkịtị anyị. Site na ahụmịhe afọ na ahịa zuru ụwa ọnụ, anyị na-enye ihe ngwọta dị elu e mere iji welie àgwà na arụmọrụ nke ọrụ ihe owuwu n'ụwa nile. Ụlọ ọrụ mmepụta ihe ọgbara ọhụrụ anyị na-eme ka ngwaahịa ndị kachasị mma na-agbaso ụkpụrụ mba ụwa. Anyị na-anya isi na ọrụ ndị ahịa pụrụ iche, nkwado ndị teknuzu, na ahaziri ngwọta iji gboo mkpa ọrụ ngo. Soro anyị maka ntụkwasị obi, ọhụrụ, na-eri-irè ihe admixtures na-akpali gị oru ngo na-aga n'ihu. Chọgharịa ọzọ na www.concreteandmore.de/. Ka anyị wulite ọdịnihu ọnụ!

Ọ bụrụ na ị nwere ajụjụ ọ bụla, biko nweere onwe gị ịkpọtụrụ anyị.

Ụzọ ịkwụ ụgwọ

T/T, Western Union, Paypal, Kaadị kredit wdg.

Ụzọ mbupu

Site n'ikuku, site n'oké osimiri, site na nkwuwa okwu, dị ka ndị ahịa na-arịọ.

5 FAQs of Concrete Mortar Admixture 100% Polyester Micro Fiber

Ajụjụ a na-ajụkarị: Concrete Mortar Admixture – 100% Polyester Micro Fiber

Gịnị bụ 100% polyester micro fiber used for in concrete?

This fiber is added to concrete or mortar to improve strength and reduce cracking. It works inside the mix to hold materials together. The result is a more durable surface that lasts longer under stress.

How does it help prevent cracks?

Tiny cracks often start when concrete shrinks as it dries. The micro fibers spread evenly through the mix. They act like a hidden support network, na-akwụsị obere mgbawa ka ọ ghara ibu ibu. This keeps the surface smoother and more stable over time.

Ọ dị mfe ịgwakọta n'ime ihe?

Ee. You can add the fibers during normal mixing. They disperse quickly and do not clump. Ọ dịghị ngwá ọrụ ma ọ bụ nzọụkwụ pụrụ iche achọrọ. Naanị soro usoro ngwakọta ọkọlọtọ, and the fibers will blend in well.

Does it affect how concrete looks or feels?

Mba. Eriri ahụ dị oke mma ma dị mkpụmkpụ. Ha anaghị agbanwe agba, udidi, ma ọ bụ imecha ngwaahịa ikpeazụ. Mgbe ọgwụgwọ, the surface looks just like regular concrete—clean and professional.

Ọ nwere ike dochie nkwado nchara?

Ọ bụghị n'ụzọ zuru ezu. Polyester micro fibers help control small cracks and boost toughness. But they do not take the place of rebar or wire mesh in structural applications. Use them as a supplement, ọ bụghị ihe nnọchi anya, for heavy-load support.