Aukinn yfirborðsáferð: Aukefni eins og loftfælingarefni geta bætt frágang og útlit steypu með því að koma í veg fyrir galla eins og sprungur, hunangsseið, eða yfirborðsryk, tryggja slétt, yfirborð í faglegum gæðum.

Specification of Concrete Admixture PP Micro Fiber 3mm 6mm 9mm for Cement Mortar and Concrete

PP Micro Fiber for Stronger Concrete and Mortar

Atriðaskoðun

Our PP mini fiber is made from high-quality polypropylene. It is available in three standard lengths: 3mm, 6mm, and 9mm . These fibers blend easily right into concrete mortar and concrete. They aid regulate cracks and improve general toughness.

Bragð þægindi

Adding PP mini fiber to your mix decreases plastic shrinking splits. This takes place during the very early drying out phase of concrete. The fibers create a solid internal network. This network holds the material with each other much better. Vegna þessa, your completed surface area remains smoother and lasts much longer.

The fibers likewise increase influence resistance. Gólf, veggjum, and pieces become much less likely to chip or break under stress and anxiety. Water absorption goes down also. That means less threat of damages from cold or chemical direct exposure.

Auðvelt í notkun

You can add PP mini fiber at any factor throughout mixing. No unique devices or actions are needed. Simply throw the fibers right into your batch like you would with sand or concrete. Þeir dreifast jafnt án þess að klessast.

Notaðu 0,6– 1.0 kg á hvern rúmmetra af steypu eða múrsteini. Change based on your job’s needs. The 3mm size functions well for thin layers like makes or floor tile adhesives. The 6mm and 9mm alternatives fit thicker pours such as structures, innkeyrslur, or commercial floors.

High Quality You Can Count On

Every set fulfills rigorous quality standards. The fibers resist antacids, raka, og UV ljós. They won’t corrosion or rot over time. This makes them safe for both interior and exterior use.

PP mini fiber gives you a simple, cost-effective means to upgrade your concrete job. It includes stamina without slowing down your work. Professionals and home builders rely upon it daily for cleaner, harder results.

Applications of Concrete Admixture PP Micro Fiber 3mm 6mm 9mm for Cement Mortar and Concrete

Applications of PP Micro Fiber in Cement and Concrete

Why Make Use Of PP Micro Fibers?

PP micro fibers are small synthetic hairs made from polypropylene. They are available in typical lengths like 3mm , 6mm , and 9mm . These fibers mix easily right into concrete mortar and concrete. Their primary job is to regulate cracks and enhance strength.

Hvar eru þær notaðar?

Home builders add PP micro fibers to several usual construction mixes. They function well in:

– Floor screeds and pieces — Fibers minimize surface breaking throughout drying.
– Forsteyptar vörur úr steypu — Products like blocks, leiðslur, and panels come to be a lot more durable.
– Skotsteypa og sprautuð steinsteypa — Fibers help hold the mix together on vertical surfaces.
– Plaster and provides — Slim layers remain intact and stand up to shrinking fractures.
– Roads and sidewalks — Light-duty surface areas last longer with much less upkeep.

How Do They Work?

When blended right into damp concrete, PP micro fibers spread uniformly. As the mix solidifies, these fibers develop a network inside the product. This network holds the cement paste with each other. It quits little cracks from becoming big issues. The result is a more versatile and impact-resistant end product.

The 3mm fibers match slim layers like plaster or tile adhesives. 6mm fibers function best in conventional concrete and floor screeds. 9mm fibers provide additional strength in thicker sections like structures or sturdy slabs.

Helstu kostir

– Minimizes plastic contraction splits .
– Enhances communication and workability .
– Adds effect and abrasion resistance .
– Auðvelt að blanda saman– engin sérstök verkfæri þarf .
– Non-corrosive and chemically secure .

PP micro fibers do not change steel support. But they work as an initial line of protection against early cracking. They make day-to-day concrete tasks simpler, sterkari, og sérlega áreiðanlegt.

Fyrirtækissnið

Við erum leiðandi á heimsvísu í léttsteypu og háþróuðum verkfræðilegum froðulausnum. Þekktur á heimsvísu fyrir skuldbindingu sína við rannsóknir, nýsköpun, og hagnýtri sérfræðiþekkingu, við höfum verið að veita verkfræðilegar froðulausnir síðan snemma árs 2012.

Við getum útvegað hágæða steypublöndu og froðusteypu tengdar vörur um allan heim.

Fyrirtækið hefur faglega tæknideild og gæðaeftirlitsdeild, vel útbúin rannsóknarstofu, og búin háþróuðum prófunarbúnaði og þjónustuveri eftir sölu.

Ef þú hefur áhuga, vinsamlegast hafðu samband við okkur.

Greiðsla

T/T, Western Union, Paypal, Kreditkort o.fl.

Sending

Með flugi, með sjó, með tjáningu, eins og viðskiptavinir óska ​​eftir.

5 FAQs of Concrete Admixture PP Micro Fiber 3mm 6mm 9mm for Cement Mortar and Concrete

What is PP micro fiber used for?

PP micro fiber strengthens cement mortar and concrete. Það hjálpar til við að stjórna sprungum af völdum þurrkunar eða hitabreytinga. Byggingaraðilar bæta því við gólf, veggjum, vegum, og forsteyptir hlutar. The fibers mix easily into wet concrete and spread evenly.

Which lengths are available—3mm, 6mm, or 9mm?

Við bjóðum three standard lengths: 3mm, 6mm, and 9mm. Use 3mm for thin layers like plaster or tile adhesive. Choose 6mm for general concrete work such as slabs and sidewalks. Pick 9mm for heavy-duty jobs like industrial floors or thick structural elements.

Hversu mikið af trefjum ætti ég að bæta við blönduna mína?

Bæta við 0.6 til 1.0 kg á rúmmetra of concrete or mortar. This amount gives good crack control without affecting workability. Always follow the project specs or consult your engineer for exact dosage.

Does PP micro fiber replace steel reinforcement?

Nei. PP micro fiber is not a substitute for steel bars or mesh. It works as secondary reinforcement to reduce early cracking. Use it together with traditional steel where needed for full structural strength.

Er auðvelt að blanda og setja?

Já. PP micro fiber blends well in standard mixers. Add it during batching with other dry materials or into wet mix while stirring. It does not clump if mixed properly. The final mix stays smooth and can be poured, troweled, or pumped like normal concrete.