경량 콘크리트 첨가제 | 기포 콘크리트용 고성능 발포제
foam generator clc is the equipment used to make foam concrete. 경량 콘크리트 생산에 매우 인기가 높으며 다양한 용도로 사용됩니다.. It can be used for the construction of walls, 바닥과 지붕, as well as filling voids in buildings.
The foam generator consists of an air compressor and a set of foaming systems, including a lance unit. The foam is created by a combination of the foaming agent and water, forced through a plastic mesh using compressed air.
It is easy to use and can be adjusted to produce a wide range of foam densities, depending on the desired density of the foam concrete. 예를 들어, if you want to make foam concrete blocks of high density, you should add less foaming agent than for low density foam concrete blocks.
There are two types of foam generators: the dry method and the wet method. Both types produce excellent quality foam, which is stable and uniform in nature.
The dry method is also known as a Venturi type foaming machine, because it creates foam by forcing a mixture of foaming agent and water through a plastic mesh with compressed air. This produces a high-quality foam that is more resistant to water and has a lower moisture content.
The wet method is more common for the construction industry, because it creates a stiffer foam with a higher volume that is easier to handle. This is also more expensive to manufacture, since it requires a large amount of air compressors and an extensive network of foaming agents and nozzles.