CLC 블록용 발포제

CLC 블록은 점토 벽돌보다 훨씬 가볍고 밀도는 약 300 – 1800 kg/m3. 이렇게 가벼운 이유는 폼 콘크리트를 사용했기 때문입니다.. Foam concrete has a low specific gravity as it entrains air within the cells. 게다가, it is also a very strong material due to the high compressive strength of the air bubbles.

To produce a foam concrete the cement/fly ash, sand and water is mixed together and then injected with pre-formed stable foam manufactured on site from TECHCELL HT. The foam concrete is then poured into moulds to produce the desired block size. It takes about 8 hours for the foam concrete to dry before it can be cut into blocks and used in construction.

foaming agent for clc blocks are usually made up of natural and synthetic based materials. These chemicals are used to make the cellular lightweight concrete (씨엘씨) which is very commonly used in the construction sector. They have a wide range of uses as they are known to be very durable and economical to use. They also have a very low toxicity level and are eco-friendly. They are normally stored in their original containers and have a shelf-life of up to 2 연령.

Previous research has shown that increasing the percentage of silica fume in the mortar mixture can increase the compressive strength of CLC. 하지만, it is still unclear what the optimum amount of silica fume can be to achieve maximum CLC compressive strength. To find this out, a series of experiments and numerical analyses have been conducted to determine the displacement, stress and strain patterns for different amounts of silica fume substitution in the mortar mixture.