Overview of Concrete Foaming Agent for Lightweight Concrete in Disinfectant Factory Floor Insulation

Concrete Foaming Agent for Lightweight Concrete in Disinfectant Factory Floor Insulation is a surfactant that generates large quantities of uniform, 물리적 또는 화학적 수단을 통해 안정된 거품. 이 폼을 시멘트계 슬러리와 완전히 혼합하면 (시멘트, 비산회, 등.) 자연적으로 또는 증기로 치료, 내부에 수많은 폐쇄형 기포가 채워진 새로운 경량 소재인 폼 콘크리트를 형성합니다..

Features of Concrete Foaming Agent for Lightweight Concrete in Disinfectant Factory Floor Insulation

1. 높은 거품 증식 비율: 높은 거품 증식율로 사용 전 희석 가능. 1kg의 농축액으로 대량의 균일한 거품이 생성됩니다., 상당한 비용 절감 효과 제공.

2. 강력한 폼 안정성: 탄력있는 생산, 붕괴나 파손에 저항하는 균일하고 미세한 폼 벽. 시멘트 슬러리의 압력을 효과적으로 견뎌냅니다., 완제품 내에서 독립적이고 밀봉된 공기 셀을 보장합니다..

3. 균일하고 미세한 기공 구조: 폼 콘크리트는 폐쇄된 구형 미세 기공의 이상적인 내부 구조를 나타냅니다., 우수한 물리적 특성 보장.

4. 낮은 재료 소비: 표준 시장 제품보다 더 낮은 복용량으로 동등한 밀도 및 강도 등급을 달성합니다., 비용 절감.

5. 친환경적이고 안전함: 중립 제형, 무독성, 냄새 없는, 부식성이 없고, 환경이나 인간의 건강에 해를 끼치지 않는 것. 녹색건축자재로 분류.

6. 폭넓은 적응성: 다양한 시멘트와의 상용성이 우수함 (일반 포틀랜드 시멘트, 알루미네이트 시멘트 포함) 및 혼합물. 확장된 거품 안정성으로 신속한 거품 발생 작용.

Specifications of Concrete Foaming Agent for Lightweight Concrete in Disinfectant Factory Floor Insulation

Specifications of Concrete Foaming Representative for Lightweight Concrete in Disinfectant Insulation

항목 요약

This concrete lathering agent is specially produced light-weight concrete used in flooring insulation systems inside anti-bacterial manufacturing facilities. 보안을 만듭니다, 콘크리트 혼합물의 균일한 기포. These bubbles lower the overall thickness while maintaining structural toughness high enough for commercial usage.

트릭 효율성 기능

높은 거품 안정성: The agent generates resilient foam that withstands breaking down throughout mixing and pouring. This makes sure constant air content throughout the last slab.
Low dosage requirement: 배치당 일정 비율만 필요합니다.– 일반적으로 0.5% 에게 1.5% 시멘트 중량 기준. This aids control prices without sacrificing performance.
Chemical compatibility: It works well with usual cement types and ingredients utilized in industrial flooring. It does not respond with disinfectants or cleansing agents generally located in manufacturing facility settings.
단열재: The resulting lightweight concrete has reduced thermal conductivity. This aids keep secure flooring temperature levels and reduces power loss.

물리적, 화학적 품질

– 모습: 연한 호박색 액체
– pH 가치: 6.5– 7.5 (중립적).
– 밀도: 1.02– 1.05 g/cm 4에서 25 ℃.
– 용해도: 물에 완전히 용해됨.
– 염화물 소재: 훨씬 적음 0.1% (non-corrosive to steel reinforcement).

모집요강

Mix the foaming representative with water initially, after that introduce it right into the concrete slurry making use of a foam generator. Heal the poured concrete under normal conditions. Avoid direct exposure to freezing temperature levels throughout the very first 48 시간. Always adhere to regional building codes and safety and security standards when mounting shielded flooring in chemical handling locations.

Applications of Concrete Foaming Agent for Lightweight Concrete in Disinfectant Factory Floor Insulation

Why Use Concrete Foaming Agent in Anti-bacterial Manufacturing Facility Floors?

Disinfectant manufacturing facilities require tidy, 마른, and well-insulated floorings. Dampness or cold from the ground can affect manufacturing top quality and employee convenience. Light-weight concrete made with a concrete lathering agent offers a clever option.

Light-weight Concrete for Better Insulation

When you add a frothing representative to concrete, it produces tiny air bubbles inside the mix. These bubbles make the concrete lighter and much less thick. 훨씬 더 눈에 띄게, they catch air, 열 전달을 감소시키는 것. This provides the floor strong thermal insulation without additional layers.

The result is a flooring that remains warmer in winter and colder in summer. Temperature stays much more stable, which helps control moisture– critical in disinfectant manufacturing where wetness can ruin products or encourage mold.

Sturdiness Satisfies Usefulness

Light-weight concrete isn’t practically insulation. It also lowers architectural tons on the building. That suggests reduced costs for structures and sustains. 동시에, it stays strong sufficient for heavy equipment and everyday web traffic in a factory setting.

Since the surface is smooth and non-porous when properly finished, it’s simpler to clean and sanitize. This matches the strict hygiene rules of disinfectant production areas.

쉬운 설정, 장기적 가치

Utilizing a foaming agent streamlines the pouring process. The mix flows well and loads areas equally. Employees can lay it quicker than conventional insulation systems. 치유되었을 때, it bonds firmly with the base piece, decreasing cracks or voids that let in chilly or wetness.

서서히, this sort of flooring cuts energy expenses by limiting heat loss through the ground. Maintenance remains low, and the danger of condensation decreases– keeping both the room and the product secure.

회사 프로필

우리는 경량 콘크리트 및 고급 엔지니어링 폼 솔루션 분야의 글로벌 리더입니다.. 연구에 대한 헌신으로 전 세계적으로 알려져 있습니다., 혁신, 및 응용 전문 지식, 우리는 2012년 초부터 엔지니어링 폼 솔루션을 제공해 왔습니다..

우리는 고품질의 콘크리트 혼화제 및 발포 콘크리트 관련 제품을 전 세계에 공급할 수 있습니다..

회사에는 전문 기술 부서와 품질 감독 부서가 있습니다., 시설이 잘 갖춰진 실험실, 첨단 테스트 장비와 애프터 서비스 센터를 갖추고 있습니다..

관심이 있으시면, 부담없이 문의해 주세요.

지불

티/티, 웨스턴 유니온, 페이팔, 신용카드 등.

선적

항공으로, 바다로, 급행으로, 고객의 요청에 따라.

5 FAQs of Concrete Foaming Agent for Lightweight Concrete in Disinfectant Factory Floor Insulation

Frequently Asked Questions About Concrete Foaming Agent for Lightweight Concrete in Disinfectant Factory Floor Insulation

콘크리트 발포제 란 무엇입니까??

콘크리트 발포제는 액체 첨가제입니다.. It creates tiny air bubbles when mixed into cement. 이 기포는 콘크리트를 더 가볍고 밀도가 낮아지게 만듭니다.. 그 결과 여전히 좋은 강도를 유지하는 경량 콘크리트가 탄생했습니다..

Why use lightweight concrete on disinfectant factory floors?

Disinfectant factories need clean, 마른, 그리고 단열이 잘 된 바닥. Lightweight concrete offers thermal insulation. It also reduces structural load on the building. This type of floor resists moisture better and helps keep the area hygienic.

발포제가 콘크리트 강도에 영향을 줍니까??

예, 하지만 올바르게 사용하는 경우에만. 거품이 너무 많으면 강도가 떨어집니다.. The right amount gives you light weight without major loss in durability. Always follow the product’s mixing instructions to get the best balance.

Is the foaming agent safe for use in chemical environments?

Most modern foaming agents are chemically stable. They do not react with common disinfectants or cleaning agents. 아직, check the product’s chemical resistance data before use in harsh settings like disinfectant factories.

How is the foaming agent applied during floor construction?

The agent is mixed with water first to create stable foam. This foam is then added to the cement mix in a concrete mixer. The final mix is poured and leveled like regular concrete. 경화시간은 비슷해요, but avoid heavy loads until fully set.