Overview of Concrete Foaming Agent for Lightweight Concrete in Paint Manufacturing Plant Fill

Concrete Foaming Agent for Lightweight Concrete in Paint Manufacturing Plant Fill is a surfactant that generates large quantities of uniform, 물리적 또는 화학적 수단을 통해 안정된 거품. 이 폼을 시멘트계 슬러리와 완전히 혼합하면 (시멘트, 비산회, 등.) 자연적으로 또는 증기로 치료, 내부에 수많은 폐쇄형 기포가 채워진 새로운 경량 소재인 폼 콘크리트를 형성합니다..

Features of Concrete Foaming Agent for Lightweight Concrete in Paint Manufacturing Plant Fill

1. 높은 거품 증식 비율: 높은 거품 증식율로 사용 전 희석 가능. 1kg의 농축액으로 대량의 균일한 거품이 생성됩니다., 상당한 비용 절감 효과 제공.

2. 강력한 폼 안정성: 탄력있는 생산, 붕괴나 파손에 저항하는 균일하고 미세한 폼 벽. 시멘트 슬러리의 압력을 효과적으로 견뎌냅니다., 완제품 내에서 독립적이고 밀봉된 공기 셀을 보장합니다..

3. 균일하고 미세한 기공 구조: 폼 콘크리트는 폐쇄된 구형 미세 기공의 이상적인 내부 구조를 나타냅니다., 우수한 물리적 특성 보장.

4. 낮은 재료 소비: 표준 시장 제품보다 더 낮은 복용량으로 동등한 밀도 및 강도 등급을 달성합니다., 비용 절감.

5. 친환경적이고 안전함: 중립 제형, 무독성, 냄새 없는, 부식성이 없고, 환경이나 인간의 건강에 해를 끼치지 않는 것. 녹색건축자재로 분류.

6. 폭넓은 적응성: 다양한 시멘트와의 상용성이 우수함 (일반 포틀랜드 시멘트, 알루미네이트 시멘트 포함) 및 혼합물. 확장된 거품 안정성으로 신속한 거품 발생 작용.

Specifications of Concrete Foaming Agent for Lightweight Concrete in Paint Manufacturing Plant Fill

Specs of Concrete Frothing Representative for Lightweight Concrete in Paint Factory Fill

품목 소개

This concrete foaming agent is particularly made for developing light-weight concrete made use of as fill product in paint manufacturing plants. It generates steady, uniform air bubbles in the cement mix. 결론은 가벼워졌네요, much more workable concrete that still satisfies structural and safety and security demands.

비밀 기능

The foaming agent is a fluid concentrate. It blends quickly with water and cement. 잘 생성됩니다, closed-cell foam that remains solid throughout pouring and treating. The final concrete has low density however excellent compressive stamina. This makes it ideal for non-load-bearing fills inside plant structures.

기술 사양

– 모습: 투명하거나 연한 갈색을 띤 노란색 액체
– 희석비율: 1 구성요소 대표자 30명– 50 부품 물 (adjust based on preferred density).
– 폼 밀도: 40– 60 kg/m 2
. – Last Concrete Thickness: 400– 1200 kg/m 6 (relying on mix style).
– pH 값: 6.5– 8.0.
– 용해도: 물에 완전히 용해됨.
– 저장: Maintain in secured containers between 5 ° C 및

35 ℃. 길찾기 사용

첫 번째, thin down the foaming agent with tidy water. Then feed the remedy into a foam generator. Mix the produced foam into the cement slurry utilizing a standard mixer. Pour the lightweight mix today to avoid foam collapse. 일반 콘크리트와 마찬가지로 양생하십시오.– however take care not to over-vibrate, as this can damage the air cells.

안전 & 손질

Use gloves and eye security when handling. Prevent skin call. Shop far from direct sunlight and freezing temperature levels. 어린이의 손이 닿지 않는 곳에 보관하세요. 유출상황에, take in with inert product and take care of properly.

Applications of Concrete Foaming Agent for Lightweight Concrete in Paint Manufacturing Plant Fill

Applications of Concrete Frothing Agent for Lightweight Concrete in Paint Factory Load

Why Usage Lightweight Concrete in Paint Plants?

Paint factory require risk-free, secure floors and structures. Hefty concrete includes way too much weight. It can emphasize structure frameworks. Light-weight concrete solves this issue. It utilizes less product however still sustains tools and everyday operations.

Function of Concrete Frothing Agent

A concrete frothing representative creates small air bubbles inside the mix. 이 거품은 콘크리트를 더 가볍게 만듭니다.. 이 물질은 물과 콘크리트와 쉽게 혼합됩니다.. It creates a stable foam that remains in area throughout pouring. This provides the final product uniform density and excellent stamina.

Advantages on the Plant Flooring

Utilizing lightweight concrete with a frothing representative cuts architectural lots. That means lower expenses for support beams and foundations. The product additionally supplies better thermal insulation. This helps regulate indoor temperature levels in big manufacturing locations. Employees find the surface less complicated to stroll on. It decreases fatigue throughout lengthy shifts.

Setup and Compatibility

The lathering representative deals with conventional blending devices. No special equipments are required. Specialists pour it like normal concrete. It establishes swiftly and bonds well with existing floors. The mix resists breaking under normal plant problems. It also deals with light chemical exposure common in paint facilities.

환경 및 보안상의 이점

Light-weight concrete usages fewer basic materials. That lowers the carbon impact of building. The lathering agent itself is non-toxic and safe to handle. 치유 후, the flooring sends out no unsafe fumes. This keeps air high quality high in enclosed offices. Paint top quality keeps consistent without disturbance from flooring off-gassing.

Last Note: Selecting the best lathering agent makes sure efficiency. Look for products evaluated in industrial setups. They need to meet local building codes and safety and security standards. Appropriate mixing ratios matter– adhere to manufacturer standards whenever.

회사 프로필

우리는 경량 콘크리트 및 고급 엔지니어링 폼 솔루션 분야의 글로벌 리더입니다.. 연구에 대한 헌신으로 전 세계적으로 알려져 있습니다., 혁신, 및 응용 전문 지식, 우리는 2012년 초부터 엔지니어링 폼 솔루션을 제공해 왔습니다..

우리는 고품질의 콘크리트 혼화제 및 발포 콘크리트 관련 제품을 전 세계에 공급할 수 있습니다..

회사에는 전문 기술 부서와 품질 감독 부서가 있습니다., 시설이 잘 갖춰진 실험실, 첨단 테스트 장비와 애프터 서비스 센터를 갖추고 있습니다..

관심이 있으시면, 부담없이 문의해 주세요.

지불

티/티, 웨스턴 유니온, 페이팔, 신용카드 등.

선적

항공으로, 바다로, 급행으로, 고객의 요청에 따라.

5 FAQs of Concrete Foaming Agent for Lightweight Concrete in Paint Manufacturing Plant Fill

Frequently Asked Questions About Concrete Foaming Agent for Lightweight Concrete in Paint Manufacturing Plant Fill

콘크리트 발포제 란 무엇입니까??

콘크리트 발포제는 시멘트 혼합물에 첨가되는 액체입니다.. 콘크리트 내부에 작은 기포를 생성합니다.. 이러한 기포는 최종 제품을 더 가볍고 취급하기 쉽게 만듭니다.. 이 물질은 강도를 너무 많이 잃지 않으면서 경량 콘크리트를 생산하는 데 도움이 됩니다..

Why use lightweight concrete in paint plant fill applications?

Paint manufacturing plants often need floor leveling or backfill material that won’t add heavy loads. Lightweight concrete reduces structural stress. It also provides good insulation and is simple to place. Using it saves time and cuts labor costs during installation.

발포제는 콘크리트 강도에 어떤 영향을 미칩니 까??

Adding a foaming agent lowers concrete density, which can reduce strength. 하지만 올바르게 사용하면, the loss is minimal. You must follow mixing ratios and curing steps. This keeps the concrete strong enough for non-structural uses like plant floor fills.

Is the foaming agent safe for indoor use in factories?

예. 대부분의 최신 발포제는 수성이며 무독성입니다.. They do not release harmful fumes after curing. Always check the safety data sheet from the supplier. Make sure the product meets local health and safety rules before use.

현장에서 발포제를 섞어도 되나요??

예. The agent is designed for easy on-site mixing. You add it to water first, then blend it into the cement and sand mix. Use a foam generator or standard mixer. Follow the manufacturer’s instructions closely. This ensures consistent bubble size and even distribution in the final mix.