Overview of Concrete Foaming Agent for Lightweight Concrete in Underground Utility Vaults

Concrete Foaming Agent for Lightweight Concrete in Underground Utility Vaults is a surfactant that generates large quantities of uniform, 물리적 또는 화학적 수단을 통해 안정된 거품. 이 폼을 시멘트계 슬러리와 완전히 혼합하면 (시멘트, 비산회, 등.) 자연적으로 또는 증기로 치료, 내부에 수많은 폐쇄형 기포가 채워진 새로운 경량 소재인 폼 콘크리트를 형성합니다..

Features of Concrete Foaming Agent for Lightweight Concrete in Underground Utility Vaults

1. 높은 거품 증식 비율: 높은 거품 증식율로 사용 전 희석 가능. 1kg의 농축액으로 대량의 균일한 거품이 생성됩니다., 상당한 비용 절감 효과 제공.

2. 강력한 폼 안정성: 탄력있는 생산, 붕괴나 파손에 저항하는 균일하고 미세한 폼 벽. 시멘트 슬러리의 압력을 효과적으로 견뎌냅니다., 완제품 내에서 독립적이고 밀봉된 공기 셀을 보장합니다..

3. 균일하고 미세한 기공 구조: 폼 콘크리트는 폐쇄된 구형 미세 기공의 이상적인 내부 구조를 나타냅니다., 우수한 물리적 특성 보장.

4. 낮은 재료 소비: 표준 시장 제품보다 더 낮은 복용량으로 동등한 밀도 및 강도 등급을 달성합니다., 비용 절감.

5. 친환경적이고 안전함: 중립 제형, 무독성, 냄새 없는, 부식성이 없고, 환경이나 인간의 건강에 해를 끼치지 않는 것. 녹색건축자재로 분류.

6. 폭넓은 적응성: 다양한 시멘트와의 상용성이 우수함 (일반 포틀랜드 시멘트, 알루미네이트 시멘트 포함) 및 혼합물. 확장된 거품 안정성으로 신속한 거품 발생 작용.

Specifications of Concrete Foaming Agent for Lightweight Concrete in Underground Utility Vaults

Specifications of Concrete Foaming Agent for Lightweight Concrete in Underground Energy Vaults

항목 요약

This concrete frothing representative is made to produce steady, lightweight concrete made use of in below ground energy vaults. It assists reduced the weight of concrete without hurting its stamina or longevity. The item blends well with water and concrete, creating uniform air bubbles that stay strong during pouring and treating.

트릭 포함

– Low density : Produces concrete with a completely dry thickness between 800– 1600 kg/m 6.
– High security : Foam keeps its form under pressure and does not collapse throughout positioning.
– 작업성이 우수함 : Makes the mix simple to pump, 위치, 그리고 코팅.
– 방수 : Helps reduce water absorption in cured concrete.
– 무독성 포뮬라 : 직원에게 안전하고 환경적 요구 사항을 충족합니다..

기술 요구 사항

The frothing representative must meet these standard specifications:
– pH 값 : 6.5– 8.5.
– 거품 성장 비율 : 20:1 에게 30:1 (volume of foam to fluid service).
– 배수 시간 : 이상 60 분 20 ℃.
– 호환성 : 포틀랜드 콘크리트와 함께 작동, 비산회, 그리고 일반적인 혼합물.
– 저장 : Maintain in secured containers away from cold or straight sunshine.

사용 지침

Use clean water to mix the frothing agent. Typical dose is 1– 3% by weight of overall mixing water. Change based on preferred thickness and website conditions. Always check a little batch before full-blown usage. Mix foam into the base slurry gradually to maintain bubble structure undamaged. Treat the concrete effectively to reach full stamina.

This frothing agent gives trusted efficiency in below ground frameworks where low weight, 단열, and simplicity of managing issue most.

Applications of Concrete Foaming Agent for Lightweight Concrete in Underground Utility Vaults

Applications of Concrete Foaming Agent for Lightweight Concrete in Underground Utility Vaults

경량 콘크리트를 사용하는 이유?

Below ground utility safes need solid however light materials. Hefty concrete includes stress to the ground and close-by frameworks. Lightweight concrete made with a frothing representative resolves this trouble. It keeps stamina while cutting weight by approximately 50%. This assists protect against working out or moving in time.

Easier Installment and Handling

Workers find lightweight concrete simpler to relocate and put. Requirement concrete is thick and hard to shape in limited below ground areas. With a concrete foaming representative , the mix ends up being a lot more workable. Teams can put it smoothly into complicated types without added effort. This speeds up building and lowers labor costs.

Better Insulation and Resilience

The tiny air bubbles produced by the foaming agent serve as natural insulators. This matters for utility vaults that house electric or telecommunications tools. Secure temperature levels minimize condensation and secure delicate gear. The very same bubbles additionally sluggish water absorption. That suggests less danger of freeze-thaw damage in cold climates. The outcome is a longer-lasting structure with fewer fixings.

Expense Savings Over Time

Using light-weight concrete cuts material usage. Less concrete and accumulation are required per cubic backyard. Transfer prices go down since vehicles carry lighter lots. Foundations can be smaller because the lots on dirt is minimized. All these aspects reduced the complete task expense. Upkeep costs also fall thanks to better moisture resistance and thermal performance.

Environmental Advantages

Light-weight concrete often utilizes less raw resources. Some lathering agents originated from recycled or environmentally friendly resources. Lower transport weight means fewer exhausts from delivery cars. These tiny modifications add up to a greener develop without giving up function or safety and security.

회사 프로필

우리는 경량 콘크리트 및 고급 엔지니어링 폼 솔루션 분야의 글로벌 리더입니다.. 연구에 대한 헌신으로 전 세계적으로 알려져 있습니다., 혁신, 및 응용 전문 지식, 우리는 2012년 초부터 엔지니어링 폼 솔루션을 제공해 왔습니다..

우리는 고품질의 콘크리트 혼화제 및 발포 콘크리트 관련 제품을 전 세계에 공급할 수 있습니다..

회사에는 전문 기술 부서와 품질 감독 부서가 있습니다., 시설이 잘 갖춰진 실험실, 첨단 테스트 장비와 애프터 서비스 센터를 갖추고 있습니다..

관심이 있으시면, 부담없이 문의해 주세요.

지불

티/티, 웨스턴 유니온, 페이팔, 신용카드 등.

선적

항공으로, 바다로, 급행으로, 고객의 요청에 따라.

5 FAQs of Concrete Foaming Agent for Lightweight Concrete in Underground Utility Vaults

Frequently Asked Questions About Concrete Foaming Agent for Lightweight Concrete in Underground Utility Vaults

콘크리트 발포제 란 무엇입니까??

콘크리트 발포제는 콘크리트 혼합물에 첨가되어 작은 기포를 생성하는 액체입니다.. 이러한 기포는 콘크리트를 더 가볍고 다루기 쉽게 만듭니다.. The result is lightweight concrete that still holds good strength for underground use.

Why use lightweight concrete in utility vaults?

Utility vaults sit below ground and often carry heavy loads from soil and traffic above. Lightweight concrete reduces total weight on the structure. It also improves insulation and makes installation faster. This helps protect pipes and cables inside the vault.

발포 콘크리트가 강도를 잃습니까??

예, 하지만 약간만. When you add the right amount of foaming agent, the concrete stays strong enough for most underground applications. Engineers design the mix so it meets required load limits while keeping weight low.

How do you mix foamed concrete correctly?

첫 번째, mix cement, 물, and sand like normal concrete. 그 다음에, blend the foaming agent with water separately to make stable foam. Add this foam slowly into the base mix while stirring gently. Too much mixing can break the bubbles. Follow the product instructions closely for best results.

Is foamed concrete waterproof enough for underground use?

On its own, foamed concrete is not fully waterproof. But you can add waterproofing admixtures or apply coatings after pouring. Many contractors also line vault walls with membranes. These steps keep water out and ensure long-term performance in wet conditions.