ວິທີການກໍ່ສ້າງຂອງ potassium methyl silicate ແລະ sodium methyl silicate sodium metasilicate solution

1. Splashing or cleaning

In the case of rough surface areas such as concrete, cement mortar, and prefabricated concrete frameworks, splashing is much better. In the case of smooth surface areas such as stones, marble, and granite, brushing can be utilized.

Before usage, the base surface ought to be thoroughly cleaned, dust and moss ought to be tidied up, and splits and openings ought to be sealed and fixed beforehand and loaded tightly.

When making use of, the silicone waterproofing agent must be used 3 times vertically and horizontally on the completely dry base surface (wall surface, ແລະອື່ນໆ) with a tidy farming sprayer or row brush. Stay in the middle. Each kg can spray 5m of the wall surface area. It ought to not be exposed to rain for 24-hour after building. Construction ought to be quit when the temperature is listed below 4 ℃. The base surface area must be dry throughout building and construction. It has a water-repellent effect in 24-hour at room temperature, and the effect is better after one week. The treating time is much longer in wintertime.

2. Add concrete mortar

Tidy the base surface area, clean oil discolorations and drifting dirt, eliminate the peeling layer, ແລະອື່ນໆ, and seal the fractures with flexible products.

Vendor

TRUNNANO ເປັນຜູ້ສະຫນອງວັດສະດຸ nano ກັບຫຼາຍກວ່າ 12 ປະສົບການປີໃນການອະນຸລັກພະລັງງານໃນການກໍ່ສ້າງ nano ແລະການພັດທະນາ nanotechnology. ມັນຍອມຮັບການຊໍາລະເງິນຜ່ານບັດເຄຣດິດ, T/T, West Union ແລະ Paypal. Trunnano ຈະສົ່ງສິນຄ້າໄປໃຫ້ລູກຄ້າຢູ່ຕ່າງປະເທດຜ່ານ FedEx, DHL, ໂດຍທາງອາກາດ, ຫຼືທາງທະເລ. ຖ້າທ່ານຕ້ອງການຮູ້ເພີ່ມເຕີມກ່ຽວກັບ sodium metasilicate solution, ກະລຸນາຮູ້ສຶກວ່າບໍ່ເສຍຄ່າເພື່ອຕິດຕໍ່ພວກເຮົາແລະສົ່ງສອບຖາມ.