Overview of Hot Concrete Chemical Additives Air Entraining Agent Concrete Foaming Agent for Wet Mixed Mortar Liquid

Hot Concrete Chemical Additives Air Entraining Agent Concrete Foaming Agent for Wet Mixed Mortar Liquid is a surfactant that generates large quantities of uniform, ໂຟມທີ່ຫມັ້ນຄົງໂດຍຜ່ານວິທີການທາງດ້ານຮ່າງກາຍຫຼືທາງເຄມີ. ເມື່ອໂຟມນີ້ຖືກປະສົມຢ່າງລະອຽດກັບ slurry ທີ່ອີງໃສ່ຊີມັງ (ຊີມັງ, ຂີ້ເທົ່າບິນ, ແລະອື່ນໆ) ແລະປິ່ນປົວຕາມທໍາມະຊາດຫຼືດ້ວຍໄອນ້ໍາ, ມັນປະກອບເປັນວັດສະດຸທີ່ມີນ້ໍາຫນັກເບົາແບບໃຫມ່ - ຄອນກີດໂຟມ - ພາຍໃນເຕັມໄປດ້ວຍຈຸລັງອາກາດປິດຈໍານວນຫລາຍ.

Features of Hot Concrete Chemical Additives Air Entraining Agent Concrete Foaming Agent for Wet Mixed Mortar Liquid

1. ອັດຕາສ່ວນຄູນໂຟມສູງ: ອັດຕາສ່ວນການຄູນໂຟມສູງຊ່ວຍໃຫ້ມີການເຈືອຈາງກ່ອນການນໍາໃຊ້. ຫນຶ່ງກິໂລເຂັ້ມຂຸ້ນສ້າງປະລິມານຂະຫນາດໃຫຍ່ຂອງໂຟມເປັນເອກະພາບ, ສະຫນອງການປະຫຍັດຄ່າໃຊ້ຈ່າຍທີ່ສໍາຄັນ.

2. ຄວາມຫມັ້ນຄົງຂອງໂຟມທີ່ເຂັ້ມແຂງ: ຜະລິດຄວາມທົນທານ, ຝາໂຟມລະອຽດເທົ່າທຽມກັນທີ່ຕ້ານການລົ້ມ ຫຼືແຕກ. ທົນທານຕໍ່ຄວາມກົດດັນຢ່າງມີປະສິດທິພາບຈາກ slurry ຊີມັງ, ຮັບປະກັນຈຸລັງອາກາດເອກະລາດແລະຜະນຶກເຂົ້າກັນພາຍໃນຜະລິດຕະພັນສໍາເລັດຮູບ.

3. ເອກະພາບ ແລະໂຄງສ້າງຮູຂຸມຂົນລະອຽດ: ຄອນກຣີດໂຟມສະແດງໃຫ້ເຫັນໂຄງສ້າງພາຍໃນທີ່ເຫມາະສົມຂອງຮູຂຸມຂົນຈຸນລະພາກ spherical ປິດ, ການ​ຮັບ​ປະ​ກັນ​ຄຸນ​ສົມ​ບັດ​ທາງ​ດ້ານ​ຮ່າງ​ກາຍ​ທີ່​ດີກ​ວ່າ​.

4. ການບໍລິໂພກວັດສະດຸຕໍ່າ: ບັນລຸລະດັບຄວາມຫນາແຫນ້ນແລະຄວາມເຂັ້ມແຂງທຽບເທົ່າທີ່ມີປະລິມານຕ່ໍາກວ່າຜະລິດຕະພັນຕະຫຼາດມາດຕະຖານ, ຫຼຸດຜ່ອນຄ່າໃຊ້ຈ່າຍ.

5. ເປັນມິດກັບສິ່ງແວດລ້ອມ ແລະປອດໄພ: ຮູບແບບທີ່ເປັນກາງ, ບໍ່ເປັນພິດ, ບໍ່ມີກິ່ນ, ແລະບໍ່ corrosive, ບໍ່ເປັນອັນຕະລາຍຕໍ່ສິ່ງແວດລ້ອມ ຫຼືສຸຂະພາບຂອງມະນຸດ. ຈັດເປັນວັດສະດຸກໍ່ສ້າງສີຂຽວ.

6. ການປັບຕົວໄດ້ກວ້າງ: ຄວາມເຂົ້າກັນໄດ້ທີ່ດີເລີດກັບຊີມັງຕ່າງໆ (ລວມທັງຊີມັງ Portland ທໍາມະດາແລະຊີມັງ aluminate) ແລະສານປະສົມ. ການປະຕິບັດໂຟມຢ່າງໄວວາດ້ວຍຄວາມຫມັ້ນຄົງຂອງໂຟມຂະຫຍາຍ.

Specifications of Hot Concrete Chemical Additives Air Entraining Agent Concrete Foaming Agent for Wet Mixed Mortar Liquid

Specifications of Hot Concrete Chemical Additives: Air-Entraining Representative & Foaming Representative for Wet-Mixed Mortar

ສະຫຼຸບລາຍການ

This fluid additive is particularly created wet-mixed mortar and concrete. It introduces little, steady air bubbles right into the mix. These bubbles improve workability, ຄວາມຕ້ານທານຕໍ່ freeze-thaw, ແລະຄວາມທົນທານໂດຍລວມ. The item works well in both warm and regular weather.

ຄຸນສົມບັດ Trick

The representative creates attire, tiny air spaces throughout the combination. This helps in reducing segregation and blood loss. It likewise makes the mortar less complicated to pump and place. The bubbles serve as stress barriers during cold cycles, which prevents breaking. The liquid type guarantees quick and even dispersion in the mix. No special equipment is required for application or blending.

ຂໍ້ມູນດ້ານວິຊາການ

ເບິ່ງ: ສີເຫຼືອງອ່ອນຫາສີເຫຼືອງອ່ອນໆຂອງນໍ້າທີ່ຈະແຈ້ງ
ຄວາມຫນາແຫນ້ນ (20 °C): 1.02– 1.06 g/ຊມ ³.
ຄ່າ pH: 6.0– 8.0.
ເນື້ອໃນແຂງ: 35% ± 2%.
ປະລິມານທີ່ແນະນໍາ: 0.05%– 0.2% ໂດຍນ້ໍາຫນັກຂອງຊີມັງ.
ຄວາມເຂົ້າກັນໄດ້: Works with most Portland concretes and typical admixtures.

ໃຊ້ຄໍາແນະນໍາ

Include the agent to the mixing water prior to including cement and accumulations. Mix extensively for at the very least 2 minutes to make certain complete circulation. Readjust dose based on ambient temperature, ປະເພດຊີມັງ, ແລະເນື້ອຫາເວັບທາງອາກາດທີ່ຕ້ອງການ. Constantly perform a trial set prior to full-scale usage. ເກັບຮັກສາໃນເຮັດໃຫ້ປະລາດ, ສະຖານທີ່ແຫ້ງຫມົດຫ່າງຈາກແສງແດດໂດຍກົງ. ຮັກສາຕູ້ຄອນເທນເນີໃຫ້ແຫນ້ນໃນເວລາທີ່ບໍ່ໄດ້ໃຊ້. ຊີວິດການເກັບຮັກສາແມ່ນ 12 ເດືອນໃນການຫຸ້ມຫໍ່ເບື້ອງຕົ້ນ.

ຄວາມປອດໄພແລະຄວາມປອດໄພແລະການຈັດການ

ໃສ່ຖົງມື ແລະປ້ອງກັນຕາຕະຫຼອດການຈັບ. Stay clear of skin call and breathing of haze. In situation of contact, ລ້າງໃຫ້ສະອາດດ້ວຍນ້ໍາ. Refer to the Safety Information Sheet (SDS) for total handling and disposal guidelines.

Applications of Hot Concrete Chemical Additives Air Entraining Agent Concrete Foaming Agent for Wet Mixed Mortar Liquid

Applications of Hot Concrete Chemical Additives

Air-Entraining Agent & Concrete Lathering Representative for Wet-Mixed Mortar Fluid

Air-entraining agents ແລະ concrete frothing agents play an essential duty in contemporary wet-mixed mortar systems. These liquid additives are mixed straight right into the batch at the plant or on-site. They develop tiny, secure air bubbles inside the fresh mortar. This boosts workability and makes the mix much easier to put and complete.

ໃນສະພາບອາກາດຮ້ອນ, concrete and mortar shed water fast. This brings about early drying out, ແຕກ, and weak spots. Including an air-entraining agent aids maintain wetness in the mix much longer. The little air gaps imitate pillows. They lower interior anxiety throughout curing and lower the danger of surface area fractures.

These ingredients likewise enhance freeze-thaw resistance. Even in warm environments, unanticipated cold snaps can harm unprotected mortar. The entrained air offers water room to increase when it ices up. This avoids scaling and spalling in time.

For lightweight applications, ໄດ້ lathering agent introduces more air to reduce density without losing strength. This works for block filling, ຊັ້ນ insulation ລະ​ບົບ​ມຸງ​, and non-load-bearing wall surfaces. The resulting mortar stays pumpable and bonds well to substratums.

Service providers pick these fluid additives due to the fact that they mix uniformly and do not require additional equipment. ລາຄາຢາຖືກຫຼຸດລົງ– ປົກກະຕິ 0.1% ກັບ 0.5% ໂດຍນ້ໍາຫນັກຂອງຊີມັງ– but outcomes are clear: ໂຄງ​ປະ​ກອບ​ການ smoother​, ການໄຫຼທີ່ດີກວ່າ, and less flaws. The item collaborates with Portland concrete, combined cements, and common admixtures like plasticizers or retarders.

Constantly comply with the supplier’s instructions for storage space and mixing. Maintain the container sealed and away from straight sun. Usage tidy water and constant batching approaches to get reliable efficiency whenever.

ຂໍ້ມູນບໍລິສັດ

ພວກເຮົາເປັນຜູ້ນໍາລະດັບໂລກໃນໂຊລູຊັ່ນໂຟມທີ່ເຮັດດ້ວຍຊີມັງນ້ຳໜັກເບົາ ແລະ ທັນສະໄໝ. ເປັນທີ່ຮູ້ຈັກໃນທົ່ວໂລກສໍາລັບຄໍາຫມັ້ນສັນຍາຂອງຕົນໃນການຄົ້ນຄວ້າ, ນະວັດຕະກໍາ, ແລະຄວາມຊໍານານທີ່ນໍາໃຊ້, ພວກ​ເຮົາ​ໄດ້​ຮັບ​ການ​ສະ​ຫນອງ​ການ​ແກ້​ໄຂ​ວິ​ສະ​ວະ​ກໍາ Foam ນັບ​ຕັ້ງ​ແຕ່​ຕົ້ນ​ປີ 2012 ຂອງ​.

ພວກເຮົາສາມາດສະຫນອງການຜະສົມຜະສານຊີມັງທີ່ມີຄຸນນະພາບສູງແລະຜະລິດຕະພັນທີ່ກ່ຽວຂ້ອງກັບຄອນກີດໂຟມທັງຫມົດໃນທົ່ວໂລກ.

ບໍລິສັດມີພະແນກວິຊາການມືອາຊີບແລະພະແນກກວດກາຄຸນນະພາບ, ຫ້ອງທົດລອງທີ່ມີອຸປະກອນດີ, ແລະມີອຸປະກອນການທົດສອບຂັ້ນສູງແລະສູນບໍລິການລູກຄ້າຫລັງການຂາຍ.

ຖ້າເຈົ້າສົນໃຈ, ກະລຸນາຮູ້ສຶກວ່າບໍ່ເສຍຄ່າແລະຕິດຕໍ່ພວກເຮົາ.

ການຈ່າຍເງິນ

T/T, Western Union, Paypal, ບັດເຄຣດິດ ແລະ ອື່ນໆ.

ການຂົນສົ່ງ

ທາງອາກາດ, ທາງທະເລ, ໂດຍດ່ວນ, ຕາມທີ່ລູກຄ້າຮ້ອງຂໍ.

5 FAQs of Hot Concrete Chemical Additives Air Entraining Agent Concrete Foaming Agent for Wet Mixed Mortar Liquid

ຄໍາຖາມທີ່ຖາມເລື້ອຍໆ

What does this air-entraining agent do?

This liquid additive creates tiny air bubbles in wet mixed mortar. These bubbles help the mortar resist damage from freezing and thawing. They also make the mix easier to work with during application.

ມັນປອດໄພບໍທີ່ຈະໃຊ້ກັບສານເສີມຊີມັງອື່ນໆ?

ແມ່ນແລ້ວ, it works well with most common concrete chemicals like water reducers or set retarders. Always check compatibility before mixing large batches. A small test batch is a good idea if you are unsure.

ຂ້ອຍຄວນເພີ່ມເຂົ້າໃນການປະສົມຂອງຂ້ອຍຫຼາຍປານໃດ?

The right amount depends on your mix design and the result you need. ປົກກະຕິແລ້ວ, ທ່ານເພີ່ມ 0.05% ກັບ 0.2% ໂດຍນ້ໍາຫນັກຂອງຊີມັງ. Follow the product label or ask your supplier for exact dosing advice.

ມັນຈະເຮັດໃຫ້ຊີມັງຂອງຂ້ອຍອ່ອນແອລົງບໍ??

A small amount of air can lower compressive strength slightly. But the trade-off is better durability, especially in cold climates. ເມື່ອໃຊ້ຢ່າງຖືກຕ້ອງ, the overall performance improves because the material lasts longer.

Can I use it in dry-mix mortars?

This product is made for wet mixed systems only. It needs water to form stable air bubbles. Do not use it in pre-blended dry mortars unless the manufacturer says it’s okay. Using it wrong may cause poor results or waste material.