Introduction to factory HPMC/Hydroxypropyl methyl cellulose hpmc 2420A 2410A with low , cas 9004-65-3

Hydroxypropyl Methylcellulose (HPMC), ຊື່ຂອງຈີນແມ່ນ hydroxypropyl methylcellulose, ເປັນເຄິ່ງສັງເຄາະ, ether ເຊນລູໂລສທີ່ບໍ່ແມ່ນ ionic ທີ່ໄດ້ຮັບໂດຍການດັດແປງ cellulose ທໍາມະຊາດທາງເຄມີ. ຜົງສີຂາວນີ້ສາມາດປະກອບເປັນການແກ້ໄຂ viscous ໂປ່ງໃສຫຼັງຈາກການລະລາຍໃນນ້ໍາ. ມັນມີຄວາມຫນາທີ່ດີເລີດ, ການຮັກສານ້ໍາ, ຄວາມຫມັ້ນຄົງແລະຄຸນສົມບັດສ້າງຮູບເງົາ. ມັນ​ເປັນ​ສານ​ເພີ່ມ​ເຕີມ multifunctional ທີ່​ຂາດ​ບໍ່​ໄດ້​ໃນ​ຫຼາຍ​ຂົງ​ເຂດ​ເຊັ່ນ​: ການ​ກໍ່​ສ້າງ​, ​ຢາ, ແລະອາຫານ.

Characteristics and advantages of factory HPMC/Hydroxypropyl methyl cellulose hpmc 2420A 2410A with low , cas 9004-65-3

ການລະລາຍນ້ໍາທີ່ດີເລີດ: ມັນສາມາດຖືກລະລາຍຢ່າງໄວວາໃນນ້ໍາເຢັນເພື່ອສ້າງເປັນການແກ້ໄຂທີ່ຊັດເຈນແລະຫມັ້ນຄົງ.

ຄວາມຫນາທີ່ມີປະສິດທິພາບແລະຄວາມສາມາດໃນການຮັກສານ້ໍາ: ເພີ່ມຄວາມຫນືດຂອງວັດສະດຸ, ຫຼຸດຜ່ອນການລະເຫີຍຂອງນ້ໍາຢ່າງມີປະສິດທິພາບ, ແລະປັບປຸງປະສິດທິພາບການເຮັດວຽກ.

ສະຖຽນລະພາບທີ່ດີ: ມັນມີຄວາມຫມັ້ນຄົງທີ່ດີຕໍ່ອາຊິດ, ດ່າງ, ແລະເກືອ, ແລະເຫມາະສົມກັບລະດັບຄວາມກ້ວາງຂອງຄ່າ pH.

ການສ້າງຮູບເງົາແລະຜົນກະທົບປ້ອງກັນ: ຫຼັງຈາກເວລາແຫ້ງ, ມັນປະກອບເປັນຮູບເງົາທີ່ແຂງແລະໂປ່ງໃສເພື່ອປົກປ້ອງຊັ້ນໃຕ້ດິນແລະປ້ອງກັນການເຈາະນ້ໍາແລະການລະເຫີຍ..

ບໍ່ມີສານພິດແລະບໍ່ລະຄາຍເຄືອງ: ມັນມີຄວາມເຂົ້າກັນໄດ້ທາງຊີວະພາບທີ່ດີແລະເຫມາະສົມສໍາລັບຂົງເຂດຢາແລະອາຫານ.

ການປັບຕົວ: ໂດຍການປ່ຽນແປງລະດັບຂອງການທົດແທນແລະນ້ໍາຫນັກໂມເລກຸນ, ປະສິດທິພາບຂອງມັນສາມາດປັບໄດ້ເພື່ອຕອບສະຫນອງຄວາມຕ້ອງການຄໍາຮ້ອງສະຫມັກທີ່ແຕກຕ່າງກັນ.

Specification of factory HPMC/Hydroxypropyl methyl cellulose hpmc 2420A 2410A with low , cas 9004-65-3

HPMC 2420A/ 2410A– High-Purity Hydroxypropyl Methyl Cellulose

ການທົບທວນຄືນລາຍການ

Our HPMC 2420A and 2410A are premium-grade hydroxypropyl methyl cellulose products. They fulfill stringent top quality requirements for commercial and construction usage. Both grades carry CAS number 9004-65-3 and use dependable efficiency in demanding applications.

ຄວາມຕ້ອງການ Trick

These HPMC grades feature a low substitution account, which supports superb water retention and workability. The methoxy content varies from 19% ກັບ 24% , while the hydroxypropoxy material falls between 4% ແລະ 12% . Viscosity is measured at 20 ° C in a 2% ການແກ້ໄຂຂອງແຫຼວ:
– HPMC 2420A : 18,000– 22,000 mPa · s.- HPMC 2410A : 8,000– 12,000 mPa · s.

Both products look like white to off-white free-flowing powders. They liquify quickly in cold water but do not liquify in hot water over gelation temperature level (typically 50– 70 °C ). pH ຂອງ a 2% remedy stays within 6.0– 8.0 , ensuring compatibility with common building products.

ຂໍ້ໄດ້ປຽບປະສິດທິພາບ

ການຮັກສານ້ໍາ is strong, which aids cement-based blends stay practical much longer. This decreases cracking and enhances bond. ຄວາມສາມາດໃນການເຮັດວຽກ remains constant even under varying temperature levels. The item also provides excellent film-forming ability and serves as a reliable thickener. It stands up to microbial deterioration and preserves security in storage space when kept completely dry.

ຄໍາຮ້ອງສະຫມັກທົ່ວໄປ

These HPMC grades are commonly used in:.
– ກາວກະເບື້ອງຊັ້ນ.
– insulation ພາຍນອກເຖິງລະບົບສິ້ນສຸດ (EIFS).
– ສານປັບລະດັບຕົນເອງ.
– plasters ແລະສະຫນອງ.
– ລາຍການທີ່ອີງໃສ່ gypsum.

Produced under regulated conditions, each batch undertakes strenuous testing to make certain harmony and compliance with global requirements. ຊື້ເຄື່ອງໃນເຮັດໃຫ້ປະລາດ, completely dry location away from dampness to protect efficiency.

Applications of factory HPMC/Hydroxypropyl methyl cellulose hpmc 2420A 2410A with low , cas 9004-65-3

Applications of Factory-Grade HPMC (Hydroxypropyl Methyl Cellulose)– Qualities 2420A & 2410ກ

Secret Utilizes in Building and Structure Products

Factory-grade HPMC with CAS number 9004-65-3 is extensively utilized in building. Grades 2420A and 2410A use strong water retention and workability. These homes make them optimal for tile adhesives, renders ທີ່ອີງໃສ່ຊີມັງ, ແລະທາດປະສົມລະດັບຕົນເອງ. The HPMC assists keep water in the mix longer. This offers workers more time to apply and smooth the material before it establishes.

Function in Dry-Mix Mortars

ໃນ mortars ປະສົມແຫ້ງ, HPMC ເຮັດໜ້າທີ່ເປັນຕົວເຮັດຄວາມໜາ ແລະ stabilizer. It avoids components from dividing during storage space or mixing. Low alternative grades like 2410A improve open time and decrease droop on upright surfaces. This is very important for plaster and skim layer applications where smooth finishes are needed.

Benefits in Gypsum-Based Products

HPMC additionally works well with gypsum plasters and joint compounds. It regulates water release so the plaster establishes equally. This reduces cracking and improves surface strength. Grade 2420A , with somewhat greater viscosity, gives better movie formation and bond in these systems.

Performance in Outside Insulation Equipments

ສໍາລັບລະບົບປະສົມ insulation ຄວາມຮ້ອນພາຍນອກ (ຈັນຍາບັນ), HPMC enhances versatility and cohesion. It helps the base coat stick strongly to insulation boards while withstanding climate tension. Both 2410A and 2420A support consistent texture and simple troweling– key for quick, clean installment.

Why Select These Grades?

These HPMC qualities are made for commercial use. They dissolve conveniently in cool water and remain steady under regular job-site conditions. Their reduced gel temperature guarantees efficiency also in warmer climates. Manufacturers rely upon them for predictable outcomes set after set.

ການແນະນໍາບໍລິສັດ

ຍິນດີຕ້ອນຮັບສູ່ຄອນກຣີດ ແລະ ອື່ນໆ, ຜູ້ໃຫ້ບໍລິການຊັ້ນນໍາຂອງເຄື່ອງຜະສົມຊີມັງທີ່ມີປະສິດຕິພາບສູງ, ລວມທັງເຄື່ອງຫຼຸດນ້ຳຊີມັງຊັ້ນເລີດຂອງພວກເຮົາ. ດ້ວຍປະສົບການຫຼາຍປີໃນຕະຫຼາດໂລກ, ພວກ​ເຮົາ​ສະ​ເຫນີ​ວິ​ທີ​ແກ້​ໄຂ​ຂັ້ນ​ສູງ​ອອກ​ແບບ​ເພື່ອ​ເສີມ​ຂະ​ຫຍາຍ​ຄຸນ​ນະ​ພາບ​ແລະ​ປະ​ສິດ​ທິ​ພາບ​ຂອງ​ໂຄງ​ການ​ກໍ່​ສ້າງ​ໃນ​ທົ່ວ​ໂລກ​. ໂຮງງານຜະລິດອັນທັນສະໄໝຂອງພວກເຮົາຮັບປະກັນສິນຄ້າຄຸນນະພາບດີໄດ້ມາດຕະຖານສາກົນ. ພວກເຮົາພູມໃຈໃນການບໍລິການລູກຄ້າພິເສດ, ສະຫນັບສະຫນູນດ້ານວິຊາການ, ແລະການແກ້ໄຂທີ່ເໝາະສົມເພື່ອຕອບສະໜອງຄວາມຕ້ອງການຂອງໂຄງການສະເພາະ. ຄູ່ຮ່ວມງານກັບພວກເຮົາສໍາລັບການທີ່ເຊື່ອຖືໄດ້, ນະວັດຕະກໍາ, ແລະການຜະສົມຜະສານຊີມັງທີ່ມີລາຄາຖືກທີ່ຂັບເຄື່ອນໂຄງການຂອງທ່ານໄປຂ້າງຫນ້າ. ສຳຫຼວດເພີ່ມເຕີມໄດ້ທີ່ www.concreteandmore.de/. ມາສ້າງອະນາຄົດນຳກັນ!

ຖ້າທ່ານມີຄໍາຖາມໃດໆ, ກະລຸນາຮູ້ສຶກວ່າບໍ່ເສຍຄ່າເພື່ອຕິດຕໍ່ພວກເຮົາ.

ວິທີການຊໍາລະເງິນ

T/T, Western Union, Paypal, ບັດເຄຣດິດ ແລະ ອື່ນໆ.

ວິທີການຂົນສົ່ງ

ທາງອາກາດ, ທາງທະເລ, ໂດຍດ່ວນ, ຕາມທີ່ລູກຄ້າຮ້ອງຂໍ.

5 FAQs of factory HPMC/Hydroxypropyl methyl cellulose hpmc 2420A 2410A with low , cas 9004-65-3

Frequently Asked Questions About HPMC 2420A & 2410ກ

What is HPMC 2420A and 2410A?

HPMC 2420A and 2410A are types of hydroxypropyl methyl cellulose. They are white to off-white powders. These grades have low viscosity and are used in many industries. Their CAS number is 9004-65-3.

What makes these grades different?

Both are low-viscosity HPMC products. The numbers “2420A” and “2410A” refer to their specific substitution levels and performance traits. 2420A offers slightly higher water retention than 2410A. This small difference helps users choose the right one for their needs.

Where are they used?

These HPMC grades work well in construction materials like tile adhesives, plasters, ແລະທາດປະສົມລະດັບຕົນເອງ. They are also used in paints, ການເຄືອບ, and some pharmaceutical applications. Their main job is to improve workability, ການຮັກສານ້ໍາ, ແລະສະຖຽນລະພາບ.

ເຂົາເຈົ້າປອດໄພບໍທີ່ຈະຈັດການ?

ແມ່ນແລ້ວ. HPMC ແມ່ນບໍ່ມີສານພິດແລະສາມາດຍ່ອຍສະຫຼາຍໄດ້. ມັນບໍ່ລະຄາຍເຄືອງຜິວຫນັງຫຼືຕາພາຍໃຕ້ການນໍາໃຊ້ປົກກະຕິ. ຍັງ, wear gloves and eye protection when handling fine powders. Keep the product dry and store it in a cool place.

How should I store HPMC 2420A and 2410A?

Store both products in sealed containers. ໃຫ້ພວກເຂົາຢູ່ຫ່າງຈາກຄວາມຊຸ່ມຊື່ນແລະແສງແດດໂດຍກົງ. Use them within 12 ເດືອນສໍາລັບຜົນໄດ້ຮັບທີ່ດີທີ່ສຸດ. If the powder clumps or changes color, ຢ່າໃຊ້ມັນ. Always check packaging for expiry dates before use.