Patobulinta paviršiaus apdaila: Priedai, tokie kaip orą sutraukiančios medžiagos, gali pagerinti betono apdailą ir išvaizdą, užkertant kelią defektams, pvz., įtrūkimams, korio, arba paviršiaus dulkinimas, užtikrinant sklandumą, profesionalus paviršius.

Specification of Concrete Admixture PVA Short Fiber for Thin Layer Cement Based Overlays

Reikalavimai betono mišiniui: PVA Short Fiber for Thin Layer Cement-Based Overlays

Produkto apžvalga

PVA short fiber is a high-performance artificial fiber made from polyvinyl alcohol. It is particularly created for use in thin layer cement-based overlays. These overlays are typically put on fix or safeguard concrete surfaces. The fiber helps boost strength, control fracturing, and rise toughness.

Raktas Apima

The fiber has outstanding bond strength with concrete matrices. It withstands alkali assault, which prevails in concrete settings. Each fiber is reduced to an exact size– dažniausiai tarp 6 mm ir 12 mm– to make sure even distribution in the mix. The surface area of the fiber is treated to improve adhesion with the surrounding concrete paste. This leads to much better crack resistance and lowered contraction.

Techninė charakteristika

– Medžiaga : Polivinilo alkoholis (PVA).
– Dydis : 6– 12 mm.
– Skersmuo : 20– 40 mikronų.
– Ištvermė tempiant : ≥ 1,200 MPa.
– Lankstus modulis : ≥ 30 Pažymių vidurkis.
– Pailgėjimas pertraukos metu : ≤ 8%.
– Atsparumas šarmams : Secure in high-pH concrete atmospheres.

Taikymo standartai

Add PVA short fiber during the mixing stage. Utilize a dosage of 0.5% į 1.5% pagal viso mišinio tūrį. Mix completely up until fibers are evenly spread. Prevent clumping by adding fibers gradually while the mixer is running. This item works well in spray-applied or trowel-finished overlays as slim as 5 mm. It works with many concrete kinds, consisting of Portland concrete and blended cements. Do not make use of with hostile chemical admixtures without prior screening.

Sandėliavimo vieta ir tvarkymas

Pirkite sausoje, trendy area far from direct sunlight. Maintain packaging sealed when not in use to prevent moisture absorption. Manage with standard construction safety and security techniques. Tvarkydami naudokite rankų darbo uždangalus ir akių apsaugą.

Applications of Concrete Admixture PVA Short Fiber for Thin Layer Cement Based Overlays

Applications of Concrete Admixture PVA Short Fiber for Thin Layer Cement-Based Overlays

Why Use PVA Short Fiber?

PVA brief fiber is a synthetic fiber included in cement-based overlays. It considerably enhances the performance of thin-layer applications. These overlays are typically only 10 į 25 milimetrų storio. Be pastiprinimo, such thin layers can break quickly under stress or shrinking. PVA fibers assist control these fractures from developing and spreading out.

Pagrindiniai privalumai realiuose projektuose

Better Split Control: PVA fibers develop a dense network inside the overlay. This network holds the product with each other also when tiny fractures show up. The outcome is a surface that stays undamaged longer and looks much better with time.

Greater Resilience: Thin overlays deal with rush hour, climate modifications, and repeated loads. PVA fibers enhance toughness and resistance to influence. This suggests much less breaking, skilimas, or surface area wear in car park decks, šaligatviai, ir tiltų paklotai.

Lengvesnis pozicionavimas: Unlike steel mesh or bigger fibers, PVA brief fibers mix equally into the cement without clumping. Employees can apply the overlay smoothly with trowels or spray devices. There’s no demand to position or safeguard extra support on-site.

Stipresnis sukibimas: The fibers do not interfere with adhesion between the overlay and the old concrete listed below. Tiesą sakant, they help preserve architectural continuity across the repair work zone. This leads to extra reputable lasting performance.

Kur jis naudojamas

Specialists use PVA-fortified overlays in several settings. Usual instances consist of restoring worn industrial floorings, resurfacing aging freeways, and fixing airport terminal paths. The approach works well for both interior and exterior tasks. Because the overlay is slim, tai prideda labai mažai svorio– ideal for structures where tons limits matter.

PVA brief fiber transforms ordinary concrete overlays right into high-performance repair service options. It fixes real problems like cracking, weak surfaces, and bad durability– without making complex the building procedure.

Įmonės profilis

Esame pasaulinis lengvojo betono ir pažangių putplasčio sprendimų lyderis. Pasaulyje žinomas dėl savo įsipareigojimo tyrimams, naujovių, ir pritaikytą ekspertizę, Mes teikiame suprojektuotus putplasčio sprendimus nuo 2012 m. pradžios.

Galime tiekti aukštos kokybės betono priedų ir putų betono gaminius visame pasaulyje.

Įmonėje veikia profesionalus techninis skyrius ir kokybės priežiūros skyrius, gerai įrengta laboratorija, ir įrengta pažangi testavimo įranga ir klientų aptarnavimo centras po pardavimo.

Jei jus domina, nedvejodami susisiekite su mumis.

Mokėjimas

T/T, Western Union, Paypal, Kreditinė kortelė ir kt.

Siuntimas

Oru, jūra, greituoju būdu, kaip pageidauja klientai.

5 FAQs of Concrete Admixture PVA Short Fiber for Thin Layer Cement Based Overlays

Dažnai užduodami klausimai: PVA Short Fiber for Thin Layer Cement Overlays

What is PVA short fiber used for?

PVA short fiber strengthens thin cement overlays. Tai padeda sustabdyti įtrūkimų susidarymą ir plitimą. This makes the surface last longer and stay smoother under traffic or weather.

Why choose PVA over other fibers?

PVA fibers bond well with cement. Jie nerūdija kaip plieno pluoštai. They also mix evenly without clumping. This gives better control over the final look and performance of the overlay.

How much PVA fiber should I add?

Dauguma projektų naudoja 0.6% į 1.5% pagal cemento svorį. Always follow the product instructions or consult your mix design. Per mažai gali padėti nepakankamai. Per didelis kiekis gali apsunkinti maišymą arba susilpninti mišinį.

Ar PVA pluoštas turi įtakos darbingumui?

A small amount of PVA fiber has little effect on workability. The mix stays easy to spread and finish. If you add more fiber, you might need a water reducer or superplasticizer to keep it smooth.

Can I use PVA fiber in wet or dry mixes?

Taip. PVA short fiber works in both wet-mix and dry-mix systems. Just make sure the fiber disperses fully during mixing. Good dispersion means even strength and fewer weak spots in the hardened overlay.