Introduction to High Water Retention Hydroxypropyl Methyl Cellulose HPMC Thickener Agent Ceramic Grade Cellulose Ether for Honeycomb Ceramics

Hidroksipropilmetilceluloze (HPMC), kura ķīniešu nosaukums ir hidroksipropilmetilceluloze, ir daļēji sintētisks, nejonu celulozes ēteris, ko iegūst, ķīmiski modificējot dabisko celulozi. Šis baltais pulveris pēc izšķīdināšanas ūdenī var veidot caurspīdīgu viskozu šķīdumu. Tam ir lielisks sabiezējums, ūdens aizture, stabilitāte un plēves veidošanas īpašības. Tā ir neaizstājama daudzfunkcionāla piedeva daudzās jomās, piemēram, celtniecībā.

Characteristics and advantages of High Water Retention Hydroxypropyl Methyl Cellulose HPMC Thickener Agent Ceramic Grade Cellulose Ether for Honeycomb Ceramics

Lieliska šķīdība ūdenī: To var ātri izšķīdināt aukstā ūdenī, veidojot dzidru un stabilu šķīdumu.

Efektīva sabiezēšanas un ūdens aiztures spēja: Palieliniet materiāla viskozitāti, efektīvi samazina ūdens iztvaikošanu, un uzlabot darba efektivitāti.

Laba stabilitāte: Tam ir laba noturība pret skābēm, sārmi, un sāļi, un ir piemērots plašam pH vērtību diapazonam.

Plēvi veidojošie un aizsargājošie efekti: Pēc žāvēšanas, tas veido stingru un caurspīdīgu plēvi, lai aizsargātu pamatni un novērstu ūdens iekļūšanu un iztvaikošanu.

Nav toksisks un nav kairinošs: Tam ir laba bioloģiskā saderība un tas ir piemērots medicīnas un pārtikas jomām.

Regulējamība: Mainot aizvietošanas pakāpi un molekulmasu, tā veiktspēju var pielāgot, lai atbilstu dažādām pielietojuma prasībām.

Specifications of High Water Retention Hydroxypropyl Methyl Cellulose HPMC Thickener Agent Ceramic Grade Cellulose Ether for Honeycomb Ceramics

Augstas ūdens aiztures HPMC biezinātājs šūnveida keramikai

Galvenās specifikācijas

Šī hidroksipropilmetilceluloze (HPMC) is a ceramic-grade cellulose ether made particularly for honeycomb ceramic production. It offers solid water retention, which helps keep the ceramic mix practical during forming and drying. Excellent water control minimizes cracks and bending in the end product.

The item looks like a white to off-white free-flowing powder. It dissolves easily in chilly water and develops a clear, biezs serviss. No swellings develop when blended effectively. Tās biezums atšķiras no 4,000 uz 100,000 mPa · s (mērīts plkst 2% pakalpojumu, 20 °C), enabling adaptable usage based upon process requirements.

Dampness material stays listed below 5%. pH vērtība a 2% remedy drops in between 6.0 un 8.0, making it neutral and safe for the majority of ceramic systems. Ash material is maintained under 5%, ensuring minimal deposit after shooting. Gel temperature is normally 58– 62 °C, which supports secure performance during drying.

Why this HPMC works well:
It offers also thickness to ceramic slurries and extrusion mixes. This boosts environment-friendly stamina prior to firing. The binder action holds fragments together without adding contaminations. Exhaustion is clean and total, leaving no carbon traces that might hurt driver finishings later on.

Packaging comes in 25 kg multi-layer paper bags with an inner PE lining. Iepērcieties pārsteidzošā veikalā, pilnīgi sausā vietā, prom no mitruma. Keep bags sealed when not being used to stop clumping.

This HPMC fulfills stringent top quality requirements for ceramic applications. Every batch is tested for uniformity in viscosity, tīrība, un efektivitāti. It fits automated extrusion lines and manual procedures alike. Customers obtain trustworthy outcomes set after batch.

Applications of High Water Retention Hydroxypropyl Methyl Cellulose HPMC Thickener Agent Ceramic Grade Cellulose Ether for Honeycomb Ceramics

Augstas ūdens aiztures HPMC šūnveida keramikai

Kāpēc ūdens aizture ir svarīga

In honeycomb ceramic manufacturing, water control is crucial. Ja maisījums arī ātri izžūst, fractures form. If it stays wet also long, forming ends up being hard. Hidroksipropilmetilceluloze (HPMC) fixes this trouble. This ceramic-grade cellulose ether holds water uniformly with the forming and drying out actions.

Smooth Processing, Better Shapes

HPMC kalpo kā biezinātājs. It offers the ceramic slurry the appropriate stickiness and flow. Employees can extrude complex honeycomb structures without damage. The material maintains its shape right after leaving the die. Malas paliek asas. Wall surfaces stay uniform. Nekādas nokarāšanās. No distortion. .

Stronger Green Bodies

Prior to firing, ceramic parts are soft– sauca “environment-friendly bodies.” HPMC increases their stamina. It binds fragments with each other delicately yet securely. This decreases managing damages. Fewer pieces break during transfer or stacking. Return goes up. Atkritumi samazinās.

Regular Drying, Mazāk problēmu

HPMC slows surface drying out. Moisture leaves gradually and uniformly. This protects against tension accumulation inside the part. Plaisas, warping, and pinholes go down sharply. Even big or thin-walled honeycombs completely dry safely.

Produced Ceramics

Not all HPMC works in ceramics. Our variation is cleansed. Ash web content is reduced. No undesirable residues remain after fatigue. It disappears in the last discharged product. Compatibility with typical ceramic powders– like cordierite or alumina– is shown. Blends easily in water. Nav kunkuļu. Nekādu atkritumu.

This HPMC thickener is built genuine factory problems. It carries out set after set. Temperature changes? Humidity swings? It remains trusted. Production runs smoother. Kvalitāte joprojām ir augsta.

Uzņēmuma profils

Mēs esam pasaules līderi vieglā betona un modernu putuplasta risinājumu jomā. Pasaulē pazīstams ar savu apņemšanos veikt pētniecību, inovācijas, un pielietotās zināšanas, mēs esam nodrošinājuši inženierijas putu risinājumus kopš 2012. gada sākuma.

Mēs varam piegādāt augstas kvalitātes betona piedevas un putu betona produktus visā pasaulē.

Uzņēmumam ir profesionāla tehniskā nodaļa un kvalitātes uzraudzības nodaļa, labi aprīkota laboratorija, un aprīkots ar modernu testēšanas aprīkojumu un pēcpārdošanas klientu apkalpošanas centru.

Ja jūs interesē, lūdzu, jūtieties brīvi un sazinieties ar mums.

Maksājums

T/T, Western Union, Paypal, Kredītkarte utt.

Sūtījums

Pa gaisu, pa jūru, ar eksprespasta palīdzību, pēc klientu pieprasījuma.

5 FAQs of High Water Retention Hydroxypropyl Methyl Cellulose HPMC Thickener Agent Ceramic Grade Cellulose Ether for Honeycomb Ceramics

Frequently Asked Questions About HPMC Thickener for Honeycomb Ceramics

What is HPMC used for in honeycomb ceramics?

HPMC is a cellulose ether that acts as a thickener and binder. It helps hold ceramic particles together during shaping. This makes green bodies strong enough to handle before firing. It also controls water retention so the mix dries evenly.

Why choose ceramic-grade HPMC over other types?

Ceramic-grade HPMC is made specifically for high-temperature applications. It burns out cleanly without leaving ash or residue. Regular grades may contain impurities that affect final product quality. Ceramic-grade ensures consistent viscosity and reliable performance.

Kā HPMC uzlabo ūdens aizturi?

HPMC absorbs and holds water in the ceramic slurry. This slows down drying and prevents cracks. Better water control means uniform shrinkage and fewer defects in the final honeycomb structure.

What happens to HPMC during firing?

HPMC fully decomposes at temperatures between 200°C and 400°C. It leaves no carbon or ash behind. This clean burnout is critical for maintaining pore structure and mechanical strength in the fired ceramic.

Cik daudz HPMC jāpievieno maisījumam?

Tipiskā deva svārstās no 0.1% uz 0.5% pēc svara sausa keramikas pulvera. The exact amount depends on particle size, moisture content, and forming method. Start with a low dose and adjust based on slurry behavior and green strength. Too much HPMC can cause slow drying or bloating during firing.