Одоо байгаа шонгийн амбаарт бетонон шалыг хэрхэн яаж хийх вэ

Гарчиг: How to Put A Concrete Floor In an Existing Pole Barn

(Одоо байгаа шонгийн амбаарт бетонон шалыг хэрхэн яаж хийх вэ)

Concretized: Putting a concrete floor in an existing pole barn can be a daunting task for many homeowners, especially if you’re new to the process. But there’s no need to fear – here are some tips that will guide you through the process.

Материал:

1. Бетон – You’ll need a heavy-duty concrete slab to build the floor.
2. – Foundation slabs will provide stability for the concrete floor.
3. Lumber – Some indoor and outdoor wood posts will be necessary for the floor.

Instructions:

Алхам 1: Gather the Materials:

– Soundproofing material (such as foam or membrane)
– Insulation material (such as cellulose insulation or fiberboard insulation)
– Vanishing paint (сонголттой)

Алхам 2: Cut the slabs:

Lengthen the lengths of each foundation post according to the diameter of the concrete slab used to make the floor. Make sure they’re parallel to each other.

Алхам 3: Install the slabs:

On one side of the basement, dig a shallow hole in the ground to allow for the pouring of the concrete into the site. Once you have placed the concrete slabs on their final positions, raise them slightly to ensure even distribution of the weight.

Алхам 4: Add the outer layer:

Once the concrete slabs are installed, add a thin layer of concrete over them using the pressure sealant provided by your installer. This will help prevent moisture from out during installation.

Алхам 5: Secure the outer layer:

To secure the outer layer, attach it to the wall behind the concrete slabs. Use screws or nails to hold the surface firmly in place.

Алхам 6: Drill holes for ventilation:

Хэрэв хүсвэл, drill holes into the walls of the pole barn to create vent holes for fresh air entering the space. You can also install fans or windows to improve air circulation within the space.

Алхам 7: Apply insulation:

Once the floor is installed, apply insulation to help insulate the space against heat and cold. Add insulation paper or tar to fit the measurements of the wall and ceiling inside the pole barn.

Алхам 8: Finish the job:

Add a coat of sealer to protect the floor from wear and tear, then finish the job with more insurance and protection materials. Эцэст нь, perform any additional safety measures, such as wiring or utilities testing, before starting the new project.

(Одоо байгаа шонгийн амбаарт бетонон шалыг хэрхэн яаж хийх вэ)

Баяр хүргэе! Your concrete floor has been successfully installed in your existing pole barn. Эдгээр алхмуудын тусламжтайгаар, you can transform your space into a comfortable and functional home with the added benefits of insulation and aseptic awareness.
халуун шошго: бетон,бетоны нэмэлтүүд