Overview of Concrete Foaming Agent for Lightweight Concrete in Partition Wall Systems

Concrete Foaming Agent for Lightweight Concrete in Partition Wall Systems is a surfactant that generates large quantities of uniform, buih yang stabil melalui cara fizikal atau kimia. Apabila buih ini dicampur dengan teliti dengan buburan berasaskan simen (simen, abu terbang, dll.) dan sembuh secara semula jadi atau dengan wap, ia membentuk bahan ringan baru—konkrit buih—dipenuhi secara dalaman dengan banyak sel udara tertutup.

Features of Concrete Foaming Agent for Lightweight Concrete in Partition Wall Systems

1. Nisbah Pendaraban Buih Tinggi: Nisbah pendaraban buih yang tinggi membolehkan pencairan sebelum digunakan. Satu kilogram pekat menghasilkan sejumlah besar buih seragam, memberikan penjimatan kos yang ketara.

2. Kestabilan Buih Kuat: Menghasilkan daya tahan, dinding buih halus seragam yang tahan keruntuhan atau pecah. Berkesan menahan tekanan daripada buburan simen, memastikan sel udara bebas dan tertutup dalam produk siap.

3. Seragam dan Struktur Liang Halus: Konkrit buih mempamerkan struktur dalaman yang ideal bagi liang mikro sfera tertutup, menjamin sifat fizikal yang unggul.

4. Penggunaan Bahan yang Rendah: Mencapai gred ketumpatan dan kekuatan yang setara dengan dos yang lebih rendah daripada produk pasaran standard, mengurangkan kos.

5. Mesra alam dan selamat: Formulasi neutral, tidak toksik, tidak berbau, dan tidak menghakis, tidak mendatangkan bahaya kepada alam sekitar atau kesihatan manusia. Dikelaskan sebagai bahan binaan hijau.

6. Kebolehsuaian yang luas: Keserasian yang sangat baik dengan pelbagai simen (termasuk simen Portland biasa dan simen aluminat) dan bahan campuran. Tindakan berbuih pantas dengan kestabilan buih yang dilanjutkan.

Specifications of Concrete Foaming Agent for Lightweight Concrete in Partition Wall Systems

Requirements of Concrete Frothing Agent for Lightweight Concrete in Dividers Wall Systems

Gambaran Keseluruhan Item

This concrete foaming representative is a high-performance fluid additive. Ia berkembang stabil, consistent air bubbles in cement blends. The result is light-weight concrete that functions well in non-load-bearing dividers walls. The product satisfies market standards for stamina, panjang umur, dan kebolehkerjaan.

Secret Technical Residence

– Tengok : Cecair ambar jernih hingga terang
– Ketumpatan : 1.02– 1.05 g/cm dua pada 25 ° C.
– Nilai pH : 6.5– 8.0.
– Keselamatan Buih : Memegang struktur untuk lebih 60 minit tanpa runtuh.
– Kadar Pencairan : Generally blended with water at 1:30 kepada 1:50 (agen kepada air).
– Keserasian : Functions with common Portland concrete and common admixtures.

Kelebihan Prestasi

The foaming representative decreases concrete thickness to in between 400– 1600 kg/m LIMA. This makes panels lighter and easier to manage during installation. It additionally enhances thermal and audio insulation. The air cells created are closed and evenly dispersed, which aids keep consistent stamina throughout the wall surface area. Shrinkage is lessened, lowering the risk of splits over time.

Garis Panduan Penggunaan

Include the foaming agent to water first, after that introduce it right into the cement slurry using a foam generator. Mix extensively yet avoid over-agitation. Usage within thirty minutes after foaming for finest results. Simpan di tempat yang hebat, lokasi kering sepenuhnya jauh dari cahaya matahari langsung. Pastikan bekas selamat apabila tidak digunakan. Shelf life is one year under correct storage problems.

Keselamatan dan Pengendalian

Gunakan sarung tangan dan pelindung mata semasa pengendalian. Elakkan terkena kulit atau mata. If get in touch with happens, wash quickly with tidy water. Jangan habiskan. Tutup daripada kanak-kanak. Follow regional laws for disposal.

Applications of Concrete Foaming Agent for Lightweight Concrete in Partition Wall Systems

Applications of Concrete Frothing Agent for Lightweight Concrete in Dividing Wall Surface Solution

Why Utilize Foamed Concrete in Walls?

Building contractors pick light-weight concrete made with a agen berbuih konkrit for indoor dividers walls. This material is very easy to take care of and lowers architectural load. It also aids manage audio and warm better than standard concrete.

Bagaimana Ia Berfungsi

A foaming representative combines with cement, air, and sand to develop little air bubbles. These bubbles make the concrete light without hurting its stamina too much. The final product has to do with 30– 70% lighter than normal concrete. That implies crews can relocate and install panels much faster and with much less initiative.

Key Advantages for Partition Walls

Ringan: Reduces stress on floors and structures. This matters most in high structures or retrofits.
Penebat Terma: The air pockets slow-moving warmth flow. Areas stay cooler in summer season and warmer in winter season.
Sound Control: Helps block sound between areas. tempat kerja, rumah, and healthcare facilities gain from this.
Tahan Api: Foamed concrete does not burn. It adds safety where fire codes are strict.
Easy to Forming: Can be cast into blocks or poured in location. Cuts cleanly for openings like doors or pipelines.

Biasa Menggunakan

You’ll find foamed concrete walls in property apartments, workplace facilities, kolej, and resorts. It works well for non-load-bearing divider panels where weight, kos, and rate issue. Service providers likewise utilize it when they need to include walls to old buildings that can’t support hefty products.

The mix design can be adjusted based on job requirements. A greater foam proportion gives more insulation however much less stamina. A reduced ratio provides a lot more durability while still conserving weight. Dalam kedua-dua kes, the result is a sensible, efficient wall surface system that satisfies contemporary structure demands.

Profil Syarikat

Kami adalah peneraju global dalam konkrit ringan dan penyelesaian buih kejuruteraan termaju. Dikenali di peringkat global kerana komitmennya terhadap penyelidikan, inovasi, dan kepakaran yang diterapkan, kami telah menyediakan penyelesaian buih kejuruteraan sejak awal tahun 2012.

Kami boleh membekalkan bahan campuran konkrit berkualiti tinggi dan produk berkaitan konkrit busa di seluruh dunia.

Syarikat ini mempunyai jabatan teknikal profesional dan jabatan penyeliaan kualiti, makmal yang serba lengkap, dan dilengkapi dengan peralatan ujian termaju dan pusat khidmat pelanggan selepas jualan.

Jika anda berminat, sila berasa bebas dan hubungi kami.

Bayaran

T/T, Western Union, Paypal, Kad Kredit dll.

Penghantaran

Melalui udara, melalui laut, secara ekspres, sebagai permintaan pelanggan.

5 FAQs of Concrete Foaming Agent for Lightweight Concrete in Partition Wall Systems

Frequently Asked Questions About Concrete Foaming Agent for Lightweight Partition Walls

Apakah ejen berbuih konkrit?

Ejen berbuih konkrit ialah bahan tambahan cecair. Ia menghasilkan gelembung udara yang stabil apabila dicampurkan ke dalam buburan simen. Gelembung ini menjadikan konkrit lebih ringan dan kurang padat. The result is a lightweight material perfect for non-load-bearing walls.

Why use foaming agent in partition wall systems?

Partition walls do not carry structural loads. Jadi, you need materials that are light but still strong enough. Foamed concrete reduces weight, cuts material costs, and improves thermal and sound insulation. It also makes handling and installation easier on site.

Bagaimanakah agen berbuih menjejaskan kekuatan?

Adding too much foam lowers compressive strength. But with the right mix design, you get the balance you need. Most partition walls only require low to moderate strength. A good foaming agent keeps strength consistent while achieving the desired density.

Is foamed concrete easy to work with?

ya. Foamed concrete flows well and fills forms without vibration. It sets quickly and can be cut or drilled after hardening. This makes it ideal for fast-track projects and custom wall shapes. Just follow the manufacturer’s mixing instructions.

Does the foaming agent impact durability?

Quality foaming agents produce closed, uniform cells. This structure resists moisture absorption and limits shrinkage cracks. As long as you use the correct dosage and curing method, the wall will stay durable over time. Always choose a trusted brand tested for construction use.