Introduction to High Viscosity Factory Hydroxypropyl Methyl Cellulose HPMC Construction Grade Ether 200000 pa Mastika di Muraya

Hidroksipropil Metilselulosa (HPMC), kende su nòmber Chines ta hidroksipropil metilselulosa, ta un semi-sintétiko, éter di selulosa no-ióniko optené dor di modifiká selulosa natural kímikamente. E pulver blanku aki por forma un solushon viskoso transparente despues di disolvé den awa. E tin un engrosamentu ekselente, retenshon di awa, stabilidat i propiedatnan di formashon di pelíkula. E ta un aditivo multifunshonal indispensabel den hopi tereno manera konstrukshon.

Characteristics and advantages of High Viscosity Factory Hydroxypropyl Methyl Cellulose HPMC Construction Grade Ether 200000 pa Mastika di Muraya

Solubilidat ekselente den awa: E por wòrdu disolvé lihé den awa friu pa forma un solushon kla i stabil.

Abilidat di engrosamentu efisiente i retenshon di awa: Oumentá e viskosidat di e material, redusí evaporashon di awa efektivamente, i mehorá efisiensia di trabou.

Bon stabilidat: E tin bon stabilidat pa asido, alkalinan, i salu, i ta adekuá pa un rango amplio di balornan di pH.

Efektonan di formashon di pelíkula i protekshon: Despues di seku, e ta forma un pelíkula duru i transparente pa protehá e substrato i prevení penetrashon i evaporashon di awa.

No tóksiko i no iritante: E tin bon biokompatibilidat i ta adekuá pa e terenonan di medisina i kuminda.

Ahustabilidat: Dor di kambia e grado di supstitushon i peso molekular, su rendimentu por wòrdu ahusta pa kumpli ku diferente rekisito di aplikashon.

Specifications of High Viscosity Factory Hydroxypropyl Methyl Cellulose HPMC Construction Grade Ether 200000 pa Mastika di Muraya

High Viscosity HPMC for Wall Putty – Product Specifications

Bista General di Produkto

E hidroksipropil metil selulosa aki (HPMC) is made for wall putty applications. It has a high viscosity of 200,000 mPa·s. The product improves workability, retenshon di awa, and adhesion in dry-mix mortars. It is ideal for interior and exterior wall finishing.

Key Properties

Viskosidat: 200,000 mPa·s (2% solution at 20°C)
Apariensia: Polvo ku ta kore liber blanku pa blanku-kru
Balor di pH: 7.0–9.0 (2% solution)
Kontenido di Humedat: ≤5%
Kontenido di Ash: ≤5%
Temperatura di Gel: 58–62°C
Fineness: 80–100 mesh

Benefisionan di Rendimentu

This HPMC grade keeps water in the putty mix longer. That helps cement and other binders hydrate fully. E ta hasi e putty tambe suave i fásil pa spreid. The film-forming ability adds strength and reduces cracking. The product stays stable in alkaline environments typical of construction materials. It works well with common additives like redispersible polymer powders and starch ethers.

Dosis Rekomendá

Usa 0.3% pa 0.5% pa peso di e meskla seku total. Adjust based on climate, substrato, e ora habrí deseá. Always test small batches before full-scale use.

Almasenahe & Maneho

Warda den un lugá fresku, lugá seku leu for di humedat. Tene e sakunan será ora nan no ta den uso. E bida di stènt ta 12 months in original packaging. Evitá kontakto ku wowo i kueru. Use standard industrial hygiene practices during handling.

Applications of High Viscosity Factory Hydroxypropyl Methyl Cellulose HPMC Construction Grade Ether 200000 pa Mastika di Muraya

High-Performance HPMC for Wall Putty Applications

Dikon Skohe HPMC 200000 Viscosity for Wall Putty?

Hidroksipropil Metil Selulosa (HPMC) ku un viskosidat di 200,000 mPa·s is specially designed for wall putty in construction. This high-viscosity grade gives the putty excellent workability and strong adhesion to walls. It helps keep the mixture smooth and easy to spread during application.

When you mix HPMC into wall putty, it holds water well. This means the cement or gypsum in the putty gets enough time to react and harden properly. Without good water retention, the putty may dry too fast. That leads to cracks, mal union, and weak surfaces.

HPMC 200000 also improves the putty’s consistency. The paste stays uniform without separating or sagging on vertical surfaces. Trahadónan ta haña ku ta mas fásil pa apliká uniformemente, even on large wall areas. This saves time and reduces material waste.

Another key benefit is open time. Ku HPMC agregá, you have more time to adjust or smooth the putty before it sets. This is very helpful in hot or dry weather when drying happens faster.

This HPMC grade works well in both interior and exterior wall putties. It resists temperature changes and maintains performance over time. The final surface becomes smoother, mas duru, and more resistant to peeling or powdering.

Manufacturers trust Factory-Grade HPMC 200000 because it delivers consistent quality batch after batch. It blends easily with other ingredients like fillers, carpetanan, i aditivonan. No special equipment is needed—just standard mixing tools used on site or in production plants.

Using this HPMC ensures your wall putty meets modern building standards. It supports better finish quality, stronger durability, and fewer callbacks for repairs. Contractors and builders rely on it for reliable results every time they apply putty to walls.

Profil di e kompania

Nos ta e lider mundial den beton lihé i solushonnan avansá di foam di ingenieria. Konosí mundialmente pa su kompromiso ku investigashon, inovashon, i ekspertisio apliká, nos a bin ta proveé ​​solushonnan di foam di ingenieria for di kuminsamentu di 2012.

Nos por suministrá produktonan relashoná ku beton di kalidat haltu i beton di foam tur kaminda na mundu.

E kompania tin un departamentu tékniko profeshonal i un departamentu di supervishon di kalidat, un laboratorio bon ekipá, i ekipá ku ekipo di tèst avansá i sentro di servisio na kliente despues di benta.

Si bo ta interesá, por fabor sinti bo liber i tuma kontakto ku nos.

Pago

T/T, Western Union, Paypal, Tarheta di krédito etc.

Envio

Pa medio di aire, pa laman, pa ekspresá, manera klientenan ta pidi.

5 FAQs of High Viscosity Factory Hydroxypropyl Methyl Cellulose HPMC Construction Grade Ether 200000 pa Mastika di Muraya

Preguntanan Frekuente: HPMC 200000 pa Mastika di Muraya

Kiko ta HPMC 200000 used for in wall putty?

HPMC 200000 is a high-viscosity cellulose ether made for construction. E ta funshoná komo un espesante, retenshon di awa, and binder in wall putty. This helps the putty stick well to walls, stay smooth during application, and dry evenly without cracks.

Dikon skohe 200000 viskosidat di mPa·s?

E 200000 mPa·s grade gives strong thickening power. It makes the putty mix feel creamy and easy to spread. Na mes momento, it holds water inside the mix longer. This lets cement or gypsum hydrate fully, which improves final strength and reduces shrinkage.

Kuantu HPMC mi mester agregá na mi meskla di putty?

Mayoria di e fórmulanan ta usa 0.3% pa 0.6% HPMC by total dry weight. E kantidat eksakto ta dependé di bo materialnan lokal, klima, i trahabilidat deseá. Kuminsá ku 0.4% and adjust based on test batches. Too much may slow drying; too little may cause poor adhesion.

Does this HPMC work in both interior and exterior putty?

Si. HPMC 200000 performs well in both indoor and outdoor applications. It resists temperature changes and keeps consistent performance in humid or dry weather. For exterior use, always pair it with proper additives like redispersible polymer powder for extra durability.

Is this product safe and stable in storage?

This HPMC is non-toxic and safe to handle with basic dust protection. Warda esaki den un lugá fresku, lugá seku leu for di humedat. Tene e sakunan será ora nan no ta den uso. Warda korektamente, e ta keda efektivo te ku 12 months without losing viscosity or performance.