Overview of Concrete Foaming Agent for Lightweight Concrete in Adhesive Production Plant Fill

Concrete Foaming Agent for Lightweight Concrete in Adhesive Production Plant Fill is a surfactant that generates large quantities of uniform, جسماني يا ڪيميائي ذريعن ذريعي مستحڪم فوم. جڏهن ته هن فوم کي چڱيءَ طرح سيمينٽ تي ٻڌل slurry سان ملايو ويندو آهي (سيمينٽ, اڏامڻ, وغيره) ۽ قدرتي طور تي يا ٻاڦ سان علاج, اهو هڪ نئون هلڪو وزن وارو مواد ٺاهي ٿو - فوم ڪنڪريٽ - اندروني طور تي ڪيترن ئي بند ٿيل هوائي سيلن سان ڀريل.

Features of Concrete Foaming Agent for Lightweight Concrete in Adhesive Production Plant Fill

1. هاء فوم ضرب جي نسبت: هاء فوم ضرب جي نسبت استعمال ڪرڻ کان اڳ گھٽائڻ جي اجازت ڏئي ٿي. هڪ ڪلوگرام ڪنسنٽريٽ هڪ وڏي مقدار ۾ يونيفارم فوم ٺاهي ٿو, اهم خرچ بچت پهچائڻ.

2. مضبوط فوم استحڪام: لچڪدار پيدا ڪري ٿي, هڪجهڙائي سان ٺيڪ فوم جون ڀتيون جيڪي ٽٽڻ يا ڀڃڻ جي مزاحمت ڪن ٿيون. مؤثر طور تي سيمينٽ slurry کان دٻاء برداشت, مڪمل پيداوار جي اندر آزاد ۽ سيل ٿيل ايئر سيلز کي يقيني بڻائڻ.

3. يونيفارم ۽ سٺي پور جي جوڙجڪ: فوم ڪنڪريٽ هڪ مثالي اندروني ڍانچي کي بند اسپيريل مائڪرو پورز جي نمائش ڪري ٿو, اعلي جسماني ملڪيت جي ضمانت.

4. گھٽ مواد واپرائڻ: معياري مارڪيٽ جي شين جي ڀيٽ ۾ گھٽ مقدار سان برابر کثافت ۽ طاقت گريڊ حاصل ڪري ٿو, خرچ گھٽائڻ.

5. ماحول دوست ۽ محفوظ: غير جانبدار فارموليشن, غير زهر, بي بوءِ, ۽ غير corrosive, ماحول يا انساني صحت کي ڪو به نقصان نه پهچايو. سائي عمارت جي مواد جي طور تي درجه بندي.

6. وسيع adaptability: مختلف سيمينٽ سان بهترين مطابقت (عام پورٽلينڊ سيمينٽ ۽ ايلومينيٽ سيمينٽ سميت) ۽ مرکبات. وڌايل فوم استحڪام سان تيز فومنگ عمل.

Specifications of Concrete Foaming Agent for Lightweight Concrete in Adhesive Production Plant Fill

Specs of Concrete Lathering Agent for Lightweight Concrete in Adhesive Manufacturing Plant Fill

پيداوار جو تعارف

This concrete frothing agent is created producing light-weight concrete used as fill product in adhesive manufacturing plants. It helps generate secure, consistent foam that blends well into concrete slurry. نتيجو هڪ هلڪو وزن آهي, مضبوط, and easy-to-place fill that meets industrial requirements.

اهم شامل آهن

The lathering representative is water-based and devoid of damaging solvents. اهو سٺو ٺاهي ٿو, regular bubbles that do not collapse during blending or treating. This ensures even density and reputable performance in every set. The item functions well with standard concrete types and does not require special tools.

جسماني خاصيتون

– ڏس: صاف کان هلڪو امبر سيال
– pH جي قيمت: 6.5– 8.0.
– کثافت: 1.02– 1.05 g/cm ٽي تي 25 ° سي.
– Solids ويب مواد: 28– 32% وزن سان.
– Lathering proportion: 20:1 جي طرف 30:1 (water to agent).
– سيڪيورٽي: Foam holds structure for over 60 منٽ.

استعمال جي معيار

Mix the foaming agent with clean water using a foam generator. Include the resulting foam slowly into the concrete slurry while blending. کان عام dosage varieties 0.3% جي طرف 0.8% سيمينٽ جي وزن سان, depending upon the target thickness. Constantly examination little sets initially to readjust for local materials and conditions.

اسٽوريج جي جاء ۽ سنڀال

هڪ رجحان ۾ اسٽور, مڪمل طور تي سڪل هنڌ سڌو سج جي روشني کان پري. ڪنٽينرز کي محفوظ رکو جڏهن استعمال ۾ نه هجي. The service life is one year from the manufacturing day if saved effectively. ٿڌي کان پري رهو. Usage handwear covers and eye security throughout dealing with as a standard precaution.

Applications of Concrete Foaming Agent for Lightweight Concrete in Adhesive Production Plant Fill

Applications of Concrete Lathering Agent for Lightweight Concrete in Adhesive Production Plant Fill Up

Why Utilize Foamed Concrete in Plant Fill?

Sticky production plants require stable, lightweight fill material under floors and around devices. Hefty standard concrete includes too much load to the framework. It also costs even more to deliver and put. Frothed concrete fixes these problems . By mixing a concrete lathering representative right into the mix, air bubbles form throughout the material. This makes the final product light however still strong sufficient for assistance.

Just how It Works On Website

Employees blend concrete, پاڻي, سانت (if required), and a percentage of frothing agent. The agent produces secure foam that mixes equally into the slurry. The outcome is a flowable, self-leveling product that fills up voids without vibration or tamping. This conserves time and labor during installment. The light-weight nature implies much less stress on structure foundations. It likewise decreases the threat of negotiation in time.

Key Advantages for Adhesive Plant Kingdoms

Lathered concrete deals thermal and acoustic insulation. This helps control temperature level and noise in sensitive manufacturing areas. Its low density reduce structural lots, which matters in multi-story or older facilities. The product stands up to splitting and shrinkage , so it stays intact under regular operating problems. Maintenance accessibility factors or utility trenches can be loaded swiftly and cleanly, with marginal disturbance to ongoing operations.

سنڀال ۽ سيڪيورٽي

Modern frothing representatives are easy to deal with and secure for workers. They do not launch dangerous fumes throughout mixing or healing. Cleanup is simple with water. Storage takes little room , and dosing systems can be automated for consistent results. This makes the process reliable also throughout large puts or tight schedules.

ڪمپني پروفائل

اسان ٿلهي ڪنڪريٽ ۽ جديد انجنيئر فوم حل ۾ عالمي اڳواڻ آهيون. تحقيق جي عزم لاء عالمي سطح تي سڃاتو وڃي ٿو, جدت, ۽ لاڳو ڪيل مهارت, اسان 2012 جي شروعات کان وٺي انجنيئر فوم حل فراهم ڪري رهيا آهيون.

اسان سڄي دنيا ۾ اعلي معيار جي ڪنڪريٽ ملائڻ ۽ فوم ڪنڪريٽ سان لاڳاپيل مصنوعات فراهم ڪري سگهون ٿا.

ڪمپني وٽ هڪ پیشہ ور ٽيڪنيڪل ڊپارٽمينٽ ۽ معيار جي نگراني واري کاتي آهي, هڪ چڱي طرح ليس ليبارٽري, ۽ جديد جاچ سامان سان ليس ۽ پوء-سيلز ڪسٽمر سروس سينٽر.

جيڪڏھن توھان دلچسپي وٺندا آھيو, مهرباني ڪري آزاد محسوس ڪريو ۽ اسان سان رابطو ڪريو.

ادائگي

ٽي/ٽي, ويسٽرن يونين, پي پال, ڪريڊٽ ڪارڊ وغيره.

ترسيل

هوا ذريعي, سمنڊ ذريعي, اظهار ذريعي, جيئن گراهڪن جي درخواست.

5 FAQs of Concrete Foaming Agent for Lightweight Concrete in Adhesive Production Plant Fill

Frequently Asked Questions About Concrete Foaming Agent for Lightweight Concrete in Adhesive Production Plant Fill

ڪنڪريٽ فومنگ ايجنٽ ڇا آهي?

هڪ ڪنڪريٽ فومنگ ايجنٽ هڪ مائع اضافو آهي. اهو ڪنڪريٽ ميڪس اندر مستحڪم هوائي بلبل ٺاهي ٿو. اهي بلبل فائنل پراڊڪٽ کي هلڪو ۽ آسان بڻائيندا آهن. The agent helps produce lightweight concrete used in plant fill applications.

Why use lightweight concrete in adhesive production plants?

Lightweight concrete reduces structural load on floors and foundations. This is important in adhesive production plants where heavy equipment is common. It also offers good thermal insulation and helps control costs by using less raw material.

فومنگ ايجنٽ ڪنڪريٽ جي طاقت کي ڪيئن متاثر ڪري ٿو?

The right amount of foaming agent keeps strength at acceptable levels while lowering density. تمام گهڻو فوم ڪنڪريٽ کي ڪمزور ڪري سگهي ٿو. Always follow the manufacturer’s dosage instructions to balance weight and performance.

Is the foaming agent compatible with other additives?

Most foaming agents work well with standard concrete additives like plasticizers or accelerators. But you should test compatibility before full-scale use. Mixing incompatible products may cause poor foam stability or uneven curing.

How should the foaming agent be stored and handled?

Store the foaming agent in a cool, سڪي جڳهه سڌو سورج جي روشني کان پري. ڪنٽينرز کي مضبوط طور تي بند رکو جڏهن استعمال ۾ نه هجي. هٿ ڪرڻ دوران دستانو ۽ اکين جي حفاظت جو استعمال ڪريو. چمڙي يا اکين سان رابطي کان بچڻ, and follow all safety instructions on the product label.