Lagu daro la taaban karo oo khafiif ah | Wakiilada Xumbaynta Waxqabadka Sare ee Shabka Gacanta
The production of Lightweight concrete can be divided into two types according to the different foaming methods: physical foaming and chemical foaming.
It has the following advantages:
1. Fudud, the density of foam concrete is small, and the density grade is generally 300-1800kg / m3, the density grade of commonly used foam concrete is 300-1200 kg / m3, in recent years, the ultra-light foam concrete with a density of 160 kg / m3 is also It has been applied in construction engineering;
2. Excellent thermal insulation performance, because the foam concrete contains a large number of small closed pores, so it has excellent thermal performance, taasi waa, Waxqabadka dahaarka kulaylka heer sare ah, which is not available in ordinary concrete. Guud ahaan, the foam concrete with a density grade of 300-1200 kg / m3 has a thermal conductivity of 0.08-0.3w / (m · K) and thermal resistance of about 10-20 times that of ordinary concrete;
3. Dab-damis heer sare ah iyo iska caabbinta dabka;
4. The overall performance is excellent, can be cast on-site construction, tightly integrated with the main project;
5. Low elasticity and excellent shock absorption;
6. Waxqabad xoog leh oo aan biyuhu lahayn;
7. Excellent durability and the same life as the main project;
8. Convenient production and processing;
9. Good environmental performance;
10. Dhismaha fudud.
The physical method of foaming is to use chemical foaming agents to pressurize the foam to form a foam with a certain tension, and then mix the foam and the cement slurry at the same time. During the mixing process, the cement will continue to expand. When the expansion effect reaches the preset ratio, The foamed cement can be formed.
The steps of using physical foaming to make lightweight concrete:
1. Ku dar sibidh, coal ash, daro la taaban karo, and other materials to the water and mix well;
2. Use foam generator to foam the diluted foaming agent, and directly add the produced foam to the stirred cement slurry;
3. Add foam in accordance with the designed ratio to continuously expand the cement slurry to reach the designed volume.
Physical foaming application areas: roof insulation and cast-in-place construction, ground leveling and backfilling, bathroom backfilling, production of lightweight partition walls, cast-in-place walls, various special-shaped components, decorative lines, outdoor molding.
Cie-China.org waa hormoodka bixiyayaasha xumbo-samaynta la taaban karo ee bixiya wakiilka xumbo-samaynta, superplasticizer,xoojinta xoogga shubka xumbo ee shubka fudud, CLC blocks. Haddii aad raadinayso wakiilka xumbo, fadlan xor u noqo nala soo xidhiidh.