Overview of Concrete Foaming Agent for Lightweight Concrete in Ceramic Tile Factory Floor Fill

Concrete Foaming Agent for Lightweight Concrete in Ceramic Tile Factory Floor Fill is a surfactant that generates large quantities of uniform, foam e tsitsitseng ka mekgoa ya mmele kapa ya dikhemikhale. Ha foam ena e tsoakane ka botlalo le seretse se thehiloeng ho samente (samente, fofa molora, etc.) ebile e phekotsoe ka tlhaho kapa ka mouoane, e etsa ntho e ncha e bobebe—konkreite ea foam—ka hare e tletseng lisele tse ngata tse koetsoeng tsa moea.

Features of Concrete Foaming Agent for Lightweight Concrete in Ceramic Tile Factory Floor Fill

1. Karolelano e phahameng ea ho atisa Foam: Karo-karolelano e phahameng ea foam e lumella ho hlapolloa pele ho sebelisoa. K'hilograma e le 'ngoe ea concentrate e hlahisa molumo o moholo oa foam e tšoanang, ho boloka litšenyehelo tse kholo.

2. Botsitso bo matla ba Foam: E hlahisa ho mamella, mabota a foam a matle ka tsela e tshwanang a hananang le ho putlama kapa ho thubeha. E mamella ka katleho khatello e tsoang ho slurry ea samente, ho netefatsa lisele tsa moea tse ikemetseng le tse tiisitsoeng ka har'a sehlahisoa se felileng.

3. Sebopeho sa Pore e sa Tšoaneng le e Ntle: Konkreite ea foam e bonts'a sebopeho se setle sa kahare sa li-micro-pores tse koetsoeng, ho netefatsa thepa e phahameng ea 'mele.

4. Tšebeliso e Tlase ea Lintho: E fihlella maemo a lekanang le a matla ka litekanyetso tse tlase ho feta lihlahisoa tse tloaelehileng tsa mmaraka, ho fokotsa litšenyehelo.

5. Eco-friendly ebile e bolokehile: Tlhaho e sa nke lehlakore, e senang chefo, e senang monko, ebile e sa senyehe, e sa hlahiseng kotsi tikolohong kapa maphelong a batho. E khethiloe e le thepa ea kaho e tala.

6. Ho ikamahanya le maemo ho pharaletseng: E lumellana hantle le samente e fapaneng (ho kenyelletsa samente e tloaelehileng ea Portland le samente ea aluminate) le metsoako. Ketso e potlakileng ea ho phoka lekobo le botsitso bo atolositsoeng ba foam.

Specifications of Concrete Foaming Agent for Lightweight Concrete in Ceramic Tile Factory Floor Fill

Specifications of Concrete Frothing Agent for Lightweight Concrete in Ceramic Tile Factory Floor Load

Kakaretso ea Ntho

This concrete lathering agent is specially produced light-weight concrete made use of as floor fill in ceramic tile factories. E hlahisa se sireletsehileng, lipululana tsa moea tse tsitsitseng motsoakong. This reduces weight and boosts insulation without injuring strength.

Boleng ba Bohlokoa ba Setsebi

– Ponahalo : Light yellow or colorless fluid
– pH Boleng : 6.0– 8.0.
– Litaba tsa Webo tse tiileng : ≥ 30%.
– Foam Multiplication Proportion : 25– 35 linako.
– 1-hour Foam Security : ≥ 90%.
– Karolelano ea ho kopanya : 1 component frothing representative to 30– 50 likarolo tsa metsi (ka boima).

Ka katleho Melemo

Moemeli o etsa hantle, closed-cell foam that mixes evenly into concrete slurry. The resulting lightweight concrete has low density– usually between 400– 1200 kg/m PEDI– making it very easy to area and take care of. It also provides good thermal and sound insulation. Floorings loaded with this material stay degree and stand up to fracturing under typical manufacturing facility lots. The item functions well with common Portland concrete and does not require unique devices.

Sebelisa Tataiso

Ea pele, thin down the lathering agent with tidy water utilizing a fixed mixer or foam generator. Joale, mix the foam into the concrete slurry up until completely combined. Put the mix straight onto the subfloor. Make certain the area is tidy and devoid of oil or loosened particles. Healing need to comply with conventional concrete techniques– maintain the surface moist for at least 48 lihora.

Sebaka sa polokelo le Ho tšoara

Reka sebakeng se phodileng, sebaka se omeletseng ka ho feletseng hole le letsatsi le otlolohileng. Maintain the container snugly shut when not in use. Shelf life is year from production date if saved correctly. Qoba ho letsetsa ka mahlo kapa letlalo. Use gloves and safety glasses during handling.

Applications of Concrete Foaming Agent for Lightweight Concrete in Ceramic Tile Factory Floor Fill

Why Use Concrete Foaming Agent for Floor Fill in Ceramic Tile Factories?

Ceramic floor tile manufacturing facilities require solid, boemo, and light-weight floors. Heavy concrete can include way too much tons to the building structure. That’s where a concrete lathering representative helps.

Boima bo bobebe Leha ho le joalo bo Matla

A concrete foaming representative develops small air bubbles inside the mix. This makes the concrete lighter without losing needed strength. The floor remains steady under heavy machines and continuous traffic. Ka nako e tšoanang, it reduces stress and anxiety on beams and structures.

Much Better Insulation and Leveling

The air pockets additionally enhance thermal insulation. This matters in large factory areas where temperature control influences power expenses. Hape, foamed concrete flows quickly right into place. It self-levels well, offering a smooth surface prior to tiles are laid. There’s much less demand for extra grinding or patching later.

Ho Seta ka potlako, Reduced Expense

Workers can put foamed concrete rapidly over big locations. It establishes faster than traditional fill products. This accelerates building and construction and cuts labor time. Kaha e bobebe, transport and handling expenses decrease as well. Much less material is commonly required to achieve the exact same efficiency.

Sturdy Under Factory Conditions

Leha e le bobebe, this concrete stands up to breaking and reducing. It takes care of vibration from machinery and foot web traffic well. Ka nako, it maintains its shape and assistance– vital for maintaining ceramic tile surfaces also and risk-free.

Using a quality concrete foaming representative offers ceramic tile manufacturing facilities a smart flooring option. It balances weight, boimana, and simplicity of use. The result is a solid base that supports both production needs and long-lasting structure health.

Boemo ba Khoebo

Re moetapele oa lefats'e oa konkreite e bobebe le tharollo ea foam e tsoetseng pele. E tsebahala lefatšeng ka bophara ka boitlamo ba eona ba ho etsa lipatlisiso, popontshwa, le botsebi bo sebelisitsoeng, esale re fana ka tharollo ea foam e entsoeng ka boenjiniere ho tloha qalong ea 2012.

Re ka fana ka motsoako oa boleng bo holimo oa konkreite le lihlahisoa tse amanang le konkreite ea foam lefatšeng ka bophara.

Khampani e na le lefapha la litsebi tsa theknoloji le lefapha la tlhokomelo ea boleng, laboratori e nang le lisebelisoa hantle, hape e na le lisebelisoa tse tsoetseng pele tsa tlhahlobo le setsi sa litšebeletso tsa bareki ka mor'a thekiso.

Haeba u thahasella, ka kopo ikutloe u lokolohile 'me u ikopanye le rona.

Tefo

T/T, phetiso ea chelete e bitsoang western union, Paypal, Credit Card etc.

Thomello

Ka moea, ka leoatle, ka Express, joalo ka ha bareki ba kopa.

5 FAQs of Concrete Foaming Agent for Lightweight Concrete in Ceramic Tile Factory Floor Fill

Frequently Asked Questions About Concrete Foaming Agent for Lightweight Floor Fill in Tile Factories

Setsi sa konkreite se phophomang maeba ke eng?

Mokelikeli oa konkreite o foaming ke motsoako oa mokelikeli. E etsa lipululana tsa moea tse nyane ka har'a motsoako oa konkreite. Li-bubble tsena li etsa hore konkreite e be bobebe 'me ho be bonolo ho sebetsana le eona. Phello ke konkreite e bobebe e ntseng e tšoere matla a matle.

Why use lightweight concrete on ceramic tile factory floors?

Tile factories need smooth, mekato e leka-lekaneng. Heavy traditional concrete adds too much weight to upper floors or weak structures. Konkreite e bobebe e fokotsa mojaro ona. It also helps with thermal insulation and makes floor leveling faster and cheaper.

Does the foaming agent weaken the concrete?

Eseng haeba u sebelisa chelete e lekaneng. Foam e ngata haholo e ka theola matla. But when mixed correctly, the lightweight concrete keeps enough strength for floor fill. Always follow the manufacturer’s mixing instructions to get the best balance of weight and durability.

Ke kopanya joang ntho e phophomang ka konkreite?

Ea pele, lokisa slurry ea motheo ka samente, metsi, le lehlabathe. Joale, hlahisa foam e tsitsitseng ka ho sebelisa sesebelisoa sa foam le jenereithara ea foam. Ka bonolo kopanya foam ho slurry. Do not stir too hard—this can break the bubbles. Pour the mix right away before the foam starts to collapse.

Is this method cost-effective for large factory areas?

Ee. Lightweight concrete uses less material and cuts labor time. It flows easily and needs little compaction. This saves money on both materials and installation. For big spaces like tile factories, these savings add up fast. Hape, the reduced structural load may lower overall building costs.