Overview of Concrete Foaming Agent for Lightweight Concrete in Furniture Factory Floor Fill

Concrete Foaming Agent for Lightweight Concrete in Furniture Factory Floor Fill is a surfactant that generates large quantities of uniform, matatag na foam sa pamamagitan ng pisikal o kemikal na paraan. Kapag ang foam na ito ay lubusang hinaluan ng cement-based slurry (semento, fly ash, atbp.) at natural na gumaling o may singaw, ito ay bumubuo ng isang nobelang magaan na materyal—foam concrete—na panloob na puno ng maraming closed air cells.

Features of Concrete Foaming Agent for Lightweight Concrete in Furniture Factory Floor Fill

1. Mataas na Foam Multiplication Ratio: Ang mataas na foam multiplication ratio ay nagbibigay-daan sa pagbabanto bago gamitin. Ang isang kilo ng concentrate ay bumubuo ng isang malaking dami ng unipormeng foam, naghahatid ng makabuluhang pagtitipid sa gastos.

2. Malakas na Foam Stability: Gumagawa ng nababanat, pantay na pinong foam wall na lumalaban sa pagbagsak o pagkabasag. Epektibong lumalaban sa presyon mula sa slurry ng semento, tinitiyak ang mga independiyente at selyadong air cell sa loob ng tapos na produkto.

3. Uniform at Fine Pore Structure: Ang foam concrete ay nagpapakita ng perpektong panloob na istraktura ng closed spherical micro-pores, ginagarantiyahan ang higit na mataas na pisikal na katangian.

4. Mababang Pagkonsumo ng Materyal: Nakakamit ang katumbas na mga marka ng density at lakas na may mas mababang dosis kaysa sa karaniwang mga produkto sa merkado, pagbabawas ng mga gastos.

5. Eco-friendly at ligtas: Neutral na pagbabalangkas, hindi nakakalason, walang amoy, at hindi kinakaing unti-unti, hindi nagdudulot ng pinsala sa kapaligiran o kalusugan ng tao. Inuri bilang isang berdeng materyales sa gusali.

6. Malawak na kakayahang umangkop: Napakahusay na pagkakatugma sa iba't ibang mga semento (kabilang ang ordinaryong Portland cement at aluminate cement) at mga halo. Mabilis na pagkilos ng foaming na may pinahabang katatagan ng foam.

Specifications of Concrete Foaming Agent for Lightweight Concrete in Furniture Factory Floor Fill

Requirements of Concrete Foaming Agent for Lightweight Concrete in Furniture Factory Floor Fill

Panimula ng Produkto

This concrete frothing representative is specifically made for creating lightweight concrete made use of as floor fill in furniture manufacturing facilities. It assists generate a steady, uniform foam that mixes quickly right into concrete. The outcome is a solid yet light concrete layer that lowers architectural tons and boosts workability throughout installment.

Trick Efficiency Includes

The lathering representative produces penalty, regular bubbles that stay undamaged during blending and putting. This guarantees also thickness throughout the concrete slab. It functions well with conventional Portland concrete and typical aggregates. No added ingredients are required. The foam remains secure for at least 60 mins after blending, providing enough time for placement and leveling.

Physical and Chemical Characteristics

– Tingnan mo: Clear to light amber liquid
– halaga ng pH: 6.5– 8.0.
– Densidad: 1.02– 1.05 g/cm apat sa 25 ° C.- Proporsyon ng pagbabanto: 1 component foaming agent hanggang 30– 50 mga bahagi ng tubig (by quantity).
– Foam development ratio: 20:1 sa 30:1.
– Drainage time: Greater than 45 min.

Mga Pamantayan sa Paggamit

Mix the frothing representative with tidy water using a foam generator. Add the created foam slowly into the concrete slurry while mixing constantly. Usage right away after prep work. Do not store pre-mixed foam for later usage. Apply in temperatures in between 5 ° C at 35 ° C for ideal results. Constantly check a small batch before major application to verify performance under site problems.

Seguridad at Paghawak

Put on handwear covers and eye defense when handling. Avoid straight sunshine and freezing temperature levels. Shop in initial closed containers in an amazing, ganap na tuyo na lugar. Shelf life is twelve month from production date if stored properly.

Applications of Concrete Foaming Agent for Lightweight Concrete in Furniture Factory Floor Fill

Why Usage Concrete Lathering Representative for Factory Floor Fill Up?

In furniture factories, the flooring needs to support hefty equipment and consistent movement. Kasabay nito, it must remain light to minimize anxiety on the building framework. That’s where light-weight concrete with a foaming representative comes in.

Light-weight Yet Solid

Adding a concrete frothing representative produces little air bubbles inside the mix. This makes the concrete much lighter– hanggang sa 30% much less dense than routine concrete. Despite the lower weight, it still holds up well under stress. The foam framework spreads tons equally, which aids prevent cracks gradually.

Easier Installation and Expense Financial Savings

Due to the fact that the mix is lighter, employees can relocate and put it extra conveniently. This speeds up the filling process and reduce labor costs. Less weight additionally implies less product is required for architectural assistance underneath, lowering general building expenses.

Much Better Thermal and Audio Control

The air pockets created by the lathering agent serve as all-natural insulators. They aid keep the factory floor warmer in winter season and cooler in summertime. This minimizes power use for heating or air conditioning. The same air spaces also soak up sound, making the work area quieter– important in active manufacturing areas.

Makinis, Level Surfaces

Foamed concrete flows well right into tight or uneven rooms. It self-levels during pouring, developing a level surface without extra grinding or patching. This is perfect for huge factory floors that require a consistent base before mounting equipment or ending up layers.

Sturdy and Moisture Resistant

Modern frothing representatives create secure, closed-cell frameworks. These stand up to water absorption and limit moisture-related damage. The result is a durable flooring fill that will not deteriorate promptly, also in humid workshop conditions typical in furnishings manufacturing.

Profile ng Kumpanya

Kami ang pandaigdigang nangunguna sa magaan na kongkreto at advanced engineered foam solution. Kilala sa buong mundo para sa kanyang pangako sa pananaliksik, pagbabago, at inilapat na kadalubhasaan, nagbibigay kami ng mga engineered foam solution mula noong unang bahagi ng 2012.

Makakapagbigay kami ng de-kalidad na kongkretong admixture at mga produktong nauugnay sa foam concrete sa buong mundo.

Ang kumpanya ay may isang propesyonal na departamentong teknikal at departamento ng pangangasiwa ng kalidad, isang mahusay na kagamitang laboratoryo, at nilagyan ng advanced na kagamitan sa pagsubok at after-sales customer service center.

Kung interesado ka, mangyaring huwag mag-atubiling at makipag-ugnayan sa amin.

Pagbabayad

T/T, Western Union, Paypal, Credit Card atbp.

Pagpapadala

Sa pamamagitan ng hangin, sa pamamagitan ng dagat, sa pamamagitan ng express, bilang kahilingan ng mga customer.

5 FAQs of Concrete Foaming Agent for Lightweight Concrete in Furniture Factory Floor Fill

Common Questions About Concrete Foaming Agent for Lightweight Floor Fill in Furniture Factories

Ano ang kongkretong foaming agent?

Ang kongkretong foaming agent ay isang likidong idinagdag sa mga pinaghalong semento. It creates tiny air bubbles inside the concrete. These bubbles make the final product lighter and easier to handle. This type of concrete is often used as floor fill in furniture factories where heavy loads are not needed.

Why use lightweight concrete on factory floors?

Lightweight concrete reduces the total weight on the building structure. This matters in multi-story factories or older buildings. It also helps with thermal insulation and sound reduction. For furniture factories, it levels uneven floors without adding too much stress to the foundation.

Does foamed concrete weaken the floor?

It depends on how it’s mixed and used. Foamed concrete is not meant for high-traffic or load-bearing surfaces. But as a floor fill beneath finished flooring, it performs well. The strength can be adjusted by changing the amount of foam and cement. Palaging sundin ang mga tagubilin ng tagagawa para sa pinakamahusay na mga resulta.

How is the foaming agent applied?

The agent is mixed with water and air using a foam generator. This foam is then blended into a cement slurry. The mixture is poured directly onto the subfloor. It flows easily and fills gaps without vibration or tamping. Workers can level it quickly before it sets.

Ito ba ay ligtas para sa panloob na paggamit?

Oo. Most modern foaming agents are non-toxic and free from harmful chemicals. They do not release dangerous fumes during or after curing. Make sure to choose a product labeled safe for interior applications and check its safety data sheet before use.