Overview of Concrete Foaming Agent for Lightweight Concrete in Water Tank Insulation

Concrete Foaming Agent for Lightweight Concrete in Water Tank Insulation is a surfactant that generates large quantities of uniform, matatag na foam sa pamamagitan ng pisikal o kemikal na paraan. Kapag ang foam na ito ay lubusang hinaluan ng cement-based slurry (semento, fly ash, atbp.) at natural na gumaling o may singaw, ito ay bumubuo ng isang nobelang magaan na materyal—foam concrete—na panloob na puno ng maraming closed air cells.

Features of Concrete Foaming Agent for Lightweight Concrete in Water Tank Insulation

1. Mataas na Foam Multiplication Ratio: Ang mataas na foam multiplication ratio ay nagbibigay-daan sa pagbabanto bago gamitin. Ang isang kilo ng concentrate ay bumubuo ng isang malaking dami ng unipormeng foam, naghahatid ng makabuluhang pagtitipid sa gastos.

2. Malakas na Foam Stability: Gumagawa ng nababanat, pantay na pinong foam wall na lumalaban sa pagbagsak o pagkabasag. Epektibong lumalaban sa presyon mula sa slurry ng semento, tinitiyak ang mga independiyente at selyadong air cell sa loob ng tapos na produkto.

3. Uniform at Fine Pore Structure: Ang foam concrete ay nagpapakita ng perpektong panloob na istraktura ng closed spherical micro-pores, ginagarantiyahan ang higit na mataas na pisikal na katangian.

4. Mababang Pagkonsumo ng Materyal: Nakakamit ang katumbas na mga marka ng density at lakas na may mas mababang dosis kaysa sa karaniwang mga produkto sa merkado, pagbabawas ng mga gastos.

5. Eco-friendly at ligtas: Neutral na pagbabalangkas, hindi nakakalason, walang amoy, at hindi kinakaing unti-unti, hindi nagdudulot ng pinsala sa kapaligiran o kalusugan ng tao. Inuri bilang isang berdeng materyales sa gusali.

6. Malawak na kakayahang umangkop: Napakahusay na pagkakatugma sa iba't ibang mga semento (kabilang ang ordinaryong Portland cement at aluminate cement) at mga halo. Mabilis na pagkilos ng foaming na may pinahabang katatagan ng foam.

Specifications of Concrete Foaming Agent for Lightweight Concrete in Water Tank Insulation

Specifications of Concrete Lathering Agent for Lightweight Concrete in Water Container Insulation

Pangkalahatang-ideya ng Item

This concrete lathering agent is produced creating lightweight concrete used in water container insulation. It mixes easily with water and concrete to form secure, uniform foam. The resulting concrete has reduced thickness, excellent thermal resistance, and strong longevity.

Key Technical Specifications

– Hitsura: Maaliwalas hanggang sa magaan na amber na likido
– Solubility: Ganap na natutunaw sa tubig
– Dilution Ratio: 1 component lathering representative to 30– 50 mga bahagi ng tubig (readjust based upon preferred foam density).
– Densidad ng Foam: 40– 60 kg/m TATLO (when correctly diluted and freshened).
– Katatagan: Foam holds shape for over 60 mins without falling down.
– pH Worth: 6.5– 8.0 (neutral to a little alkaline).
– Chloride Material: Less than 0.1% (non-corrosive to steel reinforcement).

Mga Perk sa Efficiency

The frothing agent helps create light-weight concrete that insulates well. This reduces heat transfer through water storage tank wall surfaces. The material also reduces structural lots since it weighs much less than normal concrete. It bonds well with existing surfaces and withstands splitting under temperature changes. The foam structure remains intact during putting and curing, which makes sure regular insulation performance.

Mga Alituntunin sa Paggamit

Mix the foaming representative with tidy water utilizing a foam generator. After that blend the foam into the concrete slurry. Usage right away after mixing. Maintain the workplace at 5 ° C or over during application. Do not make use of with other admixtures unless tested first. Shop the product in a great, tuyong lugar na malayo sa direktang sikat ng araw. Shelf life is twelve month in original sealed containers.

Applications of Concrete Foaming Agent for Lightweight Concrete in Water Tank Insulation

Applications of Concrete Lathering Representative for Lightweight Concrete in Water Storage Tank Insulation

Why Utilize Foamed Concrete for Water Storage Tanks?

Water containers need strong insulation to keep water great and decrease warm gain. Traditional insulation methods typically include weight or price excessive. Frothed concrete fixes both troubles. It is light, solid, and insulates well.

A concrete lathering agent creates small air bubbles inside the mix. These bubbles reduced the density of the final product. The outcome is light-weight concrete that still stands up under stress. This makes it suitable for covering big surface areas like tank roofing systems or wall surfaces without adding hefty loads.

Trick Advantages in Genuine Projects

Thermal performance : Air pockets in foamed concrete reduce warmth transfer. This maintains saved water cooler in heat and lowers energy usage if the container attaches to a home heating or cooling down system.

Madaling gamitin : Workers can pump or pour foamed concrete straight onto tank surface areas. It streams into edges and irregular areas without added labor. No need for complex formwork or bolts.

Moisture resistance : When properly treated, foamed concrete resists water absorption. This aids shield the storage tank structure from rust or mold and mildew growth.

Cost savings : Much less material is required because the mix is lighter. Transport and managing costs decline. Setup also takes less time contrasted to rigid board insulation or spray foam.

Kung Saan Ito Ginamit

Frothed concrete with a quality frothing agent works well on overhead storage tanks, underground storage tanks, and commercial water supply. It’s specifically useful where roof covering loading is limited or where bent surface areas make other insulation difficult to fit. Service providers select it for its balance of performance, kadalian ng paggamit, and long-term resilience.

Profile ng Kumpanya

Kami ang pandaigdigang nangunguna sa magaan na kongkreto at advanced engineered foam solution. Kilala sa buong mundo para sa kanyang pangako sa pananaliksik, pagbabago, at inilapat na kadalubhasaan, nagbibigay kami ng mga engineered foam solution mula noong unang bahagi ng 2012.

Makakapagbigay kami ng de-kalidad na kongkretong admixture at mga produktong nauugnay sa foam concrete sa buong mundo.

Ang kumpanya ay may isang propesyonal na departamentong teknikal at departamento ng pangangasiwa ng kalidad, isang mahusay na kagamitang laboratoryo, at nilagyan ng advanced na kagamitan sa pagsubok at after-sales customer service center.

Kung interesado ka, mangyaring huwag mag-atubiling at makipag-ugnayan sa amin.

Pagbabayad

T/T, Western Union, Paypal, Credit Card atbp.

Pagpapadala

Sa pamamagitan ng hangin, sa pamamagitan ng dagat, sa pamamagitan ng express, bilang kahilingan ng mga customer.

5 FAQs of Concrete Foaming Agent for Lightweight Concrete in Water Tank Insulation

Frequently Asked Questions About Concrete Foaming Agent for Lightweight Concrete in Water Tank Insulation

Ano ang kongkretong foaming agent?

Ang kongkretong foaming agent ay isang likidong idinagdag sa mga pinaghalong semento. Lumilikha ito ng maliliit na bula ng hangin sa loob ng kongkreto. These bubbles make the final material lighter and better at stopping heat transfer. This type of concrete works well for insulating water tanks.

Why use lightweight concrete for water tank insulation?

Lightweight concrete weighs less than normal concrete. It also has low thermal conductivity. That means it slows down heat movement. Using it around water tanks helps keep water temperature stable. It also reduces stress on the tank structure because it is not heavy.

Paano nakakaapekto ang foaming agent sa lakas ng kongkreto?

Adding too much foaming agent can lower strength. Ngunit kapag ginamit sa tamang dami, the concrete still meets required standards. The key is balancing foam volume with cement content. Always follow the manufacturer’s mixing instructions to get good results.

Is the foaming agent safe for drinking water tanks?

Most foaming agents made for construction are not meant for direct contact with drinking water. If you insulate a potable water tank, choose products labeled as safe for indirect food contact. Check local health regulations before use.

How do I mix the foaming agent correctly?

Una, dilute the foaming agent with clean water as directed. Then feed this solution into a foam generator. Mix the generated foam gently into the cement slurry. Do not overmix—it can break the bubbles and ruin the insulation effect. Use consistent ratios for every batch to keep quality steady.