Akopọ ti nja Water Reducer

Nja omi idinku, tun mo bi plasticizers, ti wa ni admixtures lo lati mu awọn workability ati agbara ti nja nigba ti atehinwa iye ti omi ti nilo. Wọn ti mu awọn flowability ti nja lai compromising awọn oniwe-agbara, ṣiṣe wọn ṣe pataki fun awọn ohun elo nja iṣẹ-giga.

Awọn ẹya ara ẹrọ ti Nja Water Reducer

Imudara Iṣẹ-ṣiṣe: Ṣe ilọsiwaju irọrun ti mimu ati gbigbe nja.

Imudara Agbara: Ṣe alekun ifasilẹ ti nja ati awọn agbara fifẹ nipa jijẹ ipin omi-si-simenti.

Dinku Omi akoonu: Faye gba fun awọn iyokuro pataki ni lilo omi laisi isonu ti aitasera.

Imudara agbara: Ṣe alabapin si agbara to dara julọ ati resistance lodi si awọn ifosiwewe ayika.

Ohun elo Wapọ: Dara fun ọpọlọpọ awọn iṣẹ ikole pẹlu awọn ile giga giga, afara, ati precast eroja.

Eco-Friendly Aṣayan: Dinku ifẹsẹtẹ erogba gbogbogbo nipa idinku akoonu simenti ti o nilo fun agbara deede.

Specifications of Water-Based Concrete Mold Release Agent Chemical Auxiliary Product

Water-Based Concrete Mold Release Agent– Awọn pato ọja

Atunwo ọja

This water-based concrete mold and mildew release representative is a high-performance chemical auxiliary made for usage in precast and cast-in-place concrete applications. It develops a tidy, smooth obstacle between the concrete surface area and formwork. The product protects against sticking, reduces surface area issues, and supports easy demolding without damaging the concrete finish.

Asiri Pẹlu

Safe and eco-friendly: Has no solvents or unsafe unstable organic compounds (Awọn VOCs). Safe for employees and certified with ecological laws.
Rọrun lati lo: Can be splashed, combed, or rolled onto wood, irin, light weight aluminum, or plastic types. Dries quickly at typical temperature levels.
Ṣiṣe deede: Kinds a consistent movie that stands up to wash-off throughout concrete positioning. Works well in both interior and outdoor problems.
Surface security: Leaves no oily residue or stains on concrete. Assists achieve architectural-quality finishes with minimal patching or cleaning required after stripping.

Imọ Data

Ifarahan: Omi funfun wara
iwuwo (20 ° C): 1.01– 1.05 g/cm MEJI.
pH iye: 7.0– 9.0.
Awọn akoonu wẹẹbu ti o lagbara: 15– 20%.
Flash factor: Not suitable (omi-orisun).
Aabo ipamọ: Minimum year in secured containers at 5– 35 ° C.

Awọn itọnisọna lilo

Shake or mix the product prior to use. Use a slim, also coat to clean, completely dry type surfaces. Allow 15– thirty minutes to completely dry before putting concrete. Reapply just if forms are exposed to rain or extreme handling. Do not over-apply– excess item might create surface discoloration or air bubbles.

Applications of Water-Based Concrete Mold Release Agent Chemical Auxiliary Product

Applications of Water-Based Concrete Mold And Mildew Release Agent

Easy Formwork Launch Without Sticking

This water-based concrete mold and mildew launch representative helps different hard concrete from formwork promptly and cleanly. It forms a thin obstacle between the concrete surface and the mold. This quits the concrete from staying with timber, irin, light weight aluminum, or plastic molds. Employees spend much less time cleansing kinds and face less delays during demolding.

Safe for Workers and the Environment

Unlike solvent-based items, this release agent utilizes water as its main carrier. It contains no harmful unpredictable organic substances (Awọn VOCs). That indicates it releases little to no solid fumes throughout usage. Employees can apply it without heavy safety gear in most cases. It additionally fulfills present ecological regulations, making it suitable for green structure jobs.

Smooth Concrete Complete Every Time

The agent leaves behind an uniform movie that stops surface area flaws like matching, oyin, or streaking. Service providers obtain regular outcomes across wall surfaces, awọn ọwọn, awọn opo, ati precast eroja. The final concrete surface area requires minimal patching or grinding before painting or layer.

Wapọ Lo Jakejado ise agbese

You can utilize this product on household, iṣowo, ati awọn iṣẹ-ṣiṣe amayederun. It functions well with tilt-up panels, bridge sectors, pipeline spreading, and building precast systems. Apply it by brush, rola, tabi kekere-titẹ sprayer. One layer is usually sufficient, and it dries fast under regular problems.

Cost-Effective and Reliable

Because it spreads out uniformly and covers a lot more location per gallon, you make use of much less product on the whole. Types remain cleaner much longer, which expands their life span. Much less downtime and less repairs indicate lower complete job expenses. The formula stays secure in storage space and performs accurately in various climate condition.

Ile-iṣẹ Ifihan

Kaabo si Nja ati Die e sii, a asiwaju olupese ti ga-išẹ nja admixtures, pẹlu wa Ere nja omi idinku. Pẹlu awọn ọdun ti iriri ni ọja agbaye, ti a nse to ti ni ilọsiwaju solusan še lati mu awọn didara ati ṣiṣe ti ikole ise agbese agbaye. Awọn ile-iṣẹ iṣelọpọ ipo-ti-aworan wa ni idaniloju awọn ọja ti o ga julọ ti o ni ibamu pẹlu awọn iṣedede agbaye. A igberaga ara wa lori exceptional onibara iṣẹ, oluranlowo lati tun nkan se, ati awọn solusan ti a ṣe deede lati pade awọn iwulo iṣẹ akanṣe. Ṣe alabaṣepọ pẹlu wa fun igbẹkẹle, aseyori, ati iye owo-doko nja admixtures ti o wakọ rẹ ise agbese siwaju. Ṣawari diẹ sii ni www.concreteandmore.de. Jẹ ki a kọ ọjọ iwaju papọ!

Ti o ba ni ibeere eyikeyi, jọwọ lero free lati kan si wa

Awọn ọna isanwo

T/T, Western Union, Paypal, Kaadi Kirẹditi ati bẹbẹ lọ.

Awọn ọna gbigbe

Nipa afẹfẹ, nipa okun, nipa kiakia, bi awọn onibara beere.

5 FAQs of Water-Based Concrete Mold Release Agent Chemical Auxiliary Product

Awọn ibeere Nigbagbogbo

What is a water-based concrete mold release agent?

A water-based concrete mold release agent is a liquid sprayed onto forms or molds before pouring concrete. It creates a thin barrier that stops wet concrete from sticking to the surface. This makes it easy to remove the form once the concrete sets. The product uses water as its main carrier, not oil or solvents.

Why choose water-based over oil-based release agents?

Water-based agents are safer for workers and better for the environment. They do not leave oily stains on finished concrete. Cleanup is easier with just soap and water. They also meet stricter environmental rules in many areas. Ni afikun, they do not affect how paint or coatings bond to the concrete later.

How do I apply this release agent?

Shake or stir the product well before use. Spray or brush a light, even coat onto clean, dry forms. Do not over-apply—too much can weaken the concrete surface. Let it dry for 15 si 30 minutes before pouring concrete. Reapply only if the form sits unused for a long time or gets wet.

Will it harm my molds or concrete finish?

Rara. This agent will not corrode metal forms or damage wood or plastic molds. O yoo fun a dan, clean finish to the concrete surface. There are no harmful residues that cause discoloration or air bubbles. Tẹle awọn itọnisọna lori aami nigbagbogbo fun awọn esi to dara julọ.

Can I use it in cold weather?

Bẹẹni, but take care. Make sure the mold surface is above freezing. If the temperature drops below 40°F (4°C), let the agent dry longer before pouring. Do not apply if rain or frost is expected soon after. Store the product in a place that stays above freezing.