Gaan nga Concrete Additives | High-Performance Foaming Agents para sa Cellular Concrete
The water absorption rate of lightweight concrete is an important technical index to measure the durability and physical properties of foam concrete.
Almost all the procedural failure processes that affect the durability of concrete are closely related to water, especially light-weight concrete. Foamed concrete is an important part of flotation, and minerals emerge along with the foam.
Foam formation and properties
(1) Reasons for formation Foam is a coarse dispersion system with gas as the dispersed phase and solid or liquid phase as the dispersion medium. This section mainly discusses the foam where the dispersion medium is an aqueous solution.
Lightweight concrete (Konkreto) exhibits the following disadvantages after absorbing water:
1. After absorbing water, the strength of the lightweight concrete decreases and the heat preservation performance decreases.
2. Too much water absorption will reduce the adhesion between lightweight concrete and structural layer or waterproof layer (intermolecular at the interface between the adhesive and the bonded object), pagliki, pagkubkob, and delamination will occur after a long time.
3. Lightweight concrete can reduce its frost resistance after absorbing water, the more water it absorbs, the worse the frost resistance;
4. Various harmful substances can use water as a carrier to erode the inside of concrete. Water carries a large amount of salt-alkali substances dissolved therein, which can make the surface alkalinize, crack and whiten, shortening its service life.
Foamed concrete has many pores, and if the bubbles are connected, it is easier to absorb water. The construction speed of air bubble light soil is fast: only simple machines can be used to realize automatic operation, and can realize long-distance transportation of 800 metros, and the workload is 150-300M3/working day. The water absorption rate of inferior foam concrete can reach more than 30%. Hinuon, if the pores are closed, there is no water absorption or water absorption rate, so foam concrete was also called closed-cell foam concrete in the early days.
It is unrealistic and unnecessary to require lightweight concrete to not absorb water at all. If the surface does not absorb water at all, the mortar will also be difficult to combine with veneer tiles or fine stone concrete surfaces.
Combined with the characteristics of lightweight concrete itself, the water absorption rate is controlled between 10%-25%; if it is used for insulation, the water absorption rate can be controlled lower. Foamed concrete, also called foamed cement or foamed concrete, is a new type of lightweight thermal insulation material developed in recent years. It uses Portland cement, active silica materials, langaw nga abo, ug uban pa. as inorganic binders, and uses thermal polymerization Surfactants are made by mixing organic binders. Its outstanding feature is the formation of a large number of closed foam cells in its interior to make it lightweight and thermally insulated, so that it has the characteristics of light weight, taas nga kusog, pagpreserbar sa kainit, insulasyon sa kainit, insulasyon sa tingog, water resistance and shock absorption.
Ang Cie-China.org mao ang nanguna nga foam concrete additives provider nga naghatag og concrete foaming agent, superplasticizer,foam concrete strength enhancer para sa lightweight nga kongkreto, Mga bloke sa CLC. Kung nangita kaahente sa foaming, palihug pagbati nga gawasnon sakontaka mi.