Introduction to MP 4M 3000 MPAS Low Viscosity Hydroxypropyl Methyl Cellulose HPMC for Ceramic Extrusion Direct

Hydroxypropylméthylcellulose (HPMC), dont le nom chinois est hydroxypropylméthylcellulose, est un semi-synthétique, éther de cellulose non ionique obtenu par modification chimique de la cellulose naturelle. Cette poudre blanche peut former une solution visqueuse transparente après dissolution dans l'eau. Il a un excellent épaississement, rétention d'eau, stabilité et propriétés filmogènes. C'est un additif multifonctionnel indispensable dans de nombreux domaines comme le bâtiment.

Characteristics and advantages of MP 4M 3000 MPAS Low Viscosity Hydroxypropyl Methyl Cellulose HPMC for Ceramic Extrusion Direct

Excellente solubilité dans l'eau: Il peut être rapidement dissous dans l'eau froide pour former une solution claire et stable.

Capacité efficace d’épaississement et de rétention d’eau: Augmente la viscosité du matériau, réduire efficacement l'évaporation de l'eau, et améliorer l'efficacité du travail.

Bonne stabilité: Il a une bonne stabilité aux acides, alcalis, et des sels, et convient à une large gamme de valeurs de pH.

Effets filmogènes et protecteurs: Après séchage, il forme un film résistant et transparent pour protéger le substrat et empêcher la pénétration de l'eau et l'évaporation.

Non toxique et non irritant: Il présente une bonne biocompatibilité et convient aux domaines médical et alimentaire..

Ajustabilité: En modifiant le degré de substitution et le poids moléculaire, ses performances peuvent être ajustées pour répondre aux différentes exigences des applications.

Specifications of MP 4M 3000 MPAS Low Viscosity Hydroxypropyl Methyl Cellulose HPMC for Ceramic Extrusion Direct

MP4M 3000 MPAS Low Viscosity HPMC for Ceramic Extrusion

Spécifications des astuces

Appel chimique: Hydroxypropylméthylcellulose (HPMC).
Product Code: MP4M 3000 MPAS.
Kind: Low viscosity quality.
Regarder: Poudre fluide blanche à blanc cassé.
Odeur: Inodore.

Viscosité (2% option à 20 °C): 2,800– 3,200 mPa · s.
Contenu Web Méthoxy: 19.0– 24.0%.
Hydroxypropoxy Web content: 4.0– 12.0%.
pH (2% service): 5.0– 8.0.
Teneur en humidité (maximum): 5.0%.
Contenu en cendres (maximum): 1.5%.

Caractéristiques d'efficacité

This HPMC grade uses excellent water retention. It assists ceramic bodies remain convenient throughout shaping and extrusion. The reduced viscosity makes sure smooth blending and also dispersion in clay blends. It decreases rubbing in between fragments. This leads to better circulation via dies and much less endure devices.

L'article se liquéfie facilement dans l'eau froide. Cela se forme clairement, secure services without lumps. It does not influence the final shade or shooting habits of ceramic ware. It stresses out easily throughout the early stages of firing. No dangerous deposits remain in the terminated item.

Utilisation Conseillée

Utilize this HPMC in extruded ceramic products like tiles, sanitaryware, blocs, and technical ceramics. Normal enhancement prices vary from 0.1% à 0.5% by dry weight of the ceramic mix. Always pre-blend the powder with various other dry ingredients before adding water. This avoids clumping and ensures uniform distribution.

Faites vos achats au frais, dry area in secured containers. Keep away from wetness and straight sunshine. La durée de vie est 24 mois lorsqu'ils sont sauvegardés de manière appropriée.

Applications of MP 4M 3000 MPAS Low Viscosity Hydroxypropyl Methyl Cellulose HPMC for Ceramic Extrusion Direct

Applications of MP 4M 3000 MPAS Low Thickness Hydroxypropyl Methyl Cellulose (HPMC) in Ceramic Extrusion

Improved Workability and Smooth Extrusion

MP4M 3000 MPAS is a reduced viscosity quality of hydroxypropyl methyl cellulose made for ceramic extrusion. It provides ceramic bodies better workability. The material streams efficiently via the die during extrusion. This minimizes stress on the machine and helps prevent blockages.

Attire Eco-friendly Strength

This HPMC grade develops constant green toughness in unfired ceramic parts. It holds particles together without making the mix as well tight. That indicates shapes keep their kind right after extrusion. Breaking or deforming is less most likely to take place throughout handling or drying out.

Managed Water Retention

Water management matters a whole lot in ceramic forming. MP4M 3000 MPAS holds just sufficient water to decrease drying out at the surface area. This stops quick moisture loss that results in cracks. The result is extra also drying out throughout the entire item.

Tidy Fatigue and Reduced Deposit

The additive burns out cleanly during shooting. It leaves extremely little ash or carbon behind. That aids maintain the final product’s shade, densité, and architectural high quality. No added actions are needed to remove deposits.

Easy Mixing and Compatibility

MP4M 3000 MPAS mixes well with typical ceramic ingredients like clay, feldspar, et de la silice. It dissolves promptly in water and spreads uniformly through the batch. You do not need unique equipment to use it. Criterion mixing systems function penalty.

Constant Efficiency Throughout Batches

Every set of this HPMC does the same way. That offers manufacturers dependable arise from one manufacturing run to the following. Less variant means less denies and smoother procedures on the .

Profil de l'entreprise

Nous sommes le leader mondial des solutions avancées de béton léger et de mousse technique.. Connu mondialement pour son engagement en faveur de la recherche, innovation, et expertise appliquée, nous fournissons des solutions de mousse technique depuis le début des années 2012.

Nous pouvons fournir des adjuvants pour béton et des produits liés au béton mousse de haute qualité dans le monde entier..

L'entreprise dispose d'un département technique professionnel et d'un département de supervision de la qualité, un laboratoire bien équipé, et équipé d'un équipement de test avancé et d'un centre de service client après-vente.

Si vous êtes intéressé, n'hésitez pas et contactez-nous.

Paiement

T/T, Western union, Paypal, Carte de crédit, etc..

Expédition

Par avion, par la mer, par express, comme le demandent les clients.

5 FAQs of MP 4M 3000 MPAS Low Viscosity Hydroxypropyl Methyl Cellulose HPMC for Ceramic Extrusion Direct

Frequently Asked Questions About MP 4M 3000 MPAS HPMC for Ceramic Extrusion

What is MP 4M 3000 MPAS HPMC?

MP4M 3000 MPAS is a low viscosity hydroxypropyl methyl cellulose (HPMC) made for ceramic extrusion. It helps bind ceramic powders together so they keep their shape during forming and drying. This grade dissolves easily in water and gives smooth, even flow in the mix.

Why use low viscosity HPMC in ceramics?

Low viscosity HPMC mixes well into ceramic batches without making them too thick. It gives enough binding strength while keeping the paste workable. This helps avoid cracks or breaks during extrusion and drying. The result is a more consistent product with fewer defects.

How much MP 4M 3000 should I add to my ceramic mix?

Les niveaux d'utilisation typiques vont de 0.2% à 0.8% en poids de poudre céramique sèche. The exact amount depends on your clay type, taille des particules, and process conditions. Start with a small test batch and adjust based on how the mix feels and performs.

Does this HPMC affect firing results?

Non. MP4M 3000 burns out cleanly during the early stages of firing. It leaves no ash or residue that could harm the final ceramic body. Make sure your heating schedule allows enough time for full removal before reaching high temperatures.

Can I mix MP 4M 3000 with other additives?

Oui. This HPMC works well with common ceramic additives like plasticizers, dispersants, et lubrifiants. Always check compatibility by doing a small trial first. Add HPMC to water before introducing other dry ingredients to ensure even dispersion.