Introduction to MP 4M 3000 MPAS Low Viscosity Hydroxypropyl Methyl Cellulose HPMC for Ceramic Extrusion Direct

Hidroksipropil metilceluloza (HPMC), katerega kitajsko ime je hidroksipropil metilceluloza, je polsintetika, neionski celulozni eter, pridobljen s kemijsko modifikacijo naravne celuloze. Ta beli prašek lahko po raztapljanju v vodi tvori prozorno viskozno raztopino. Ima odlično zgoščevanje, zadrževanje vode, stabilnost in lastnosti tvorjenja filma. Je nepogrešljiv večnamenski dodatek na številnih področjih, kot je gradbeništvo.

Characteristics and advantages of MP 4M 3000 MPAS Low Viscosity Hydroxypropyl Methyl Cellulose HPMC for Ceramic Extrusion Direct

Odlična topnost v vodi: Lahko se hitro raztopi v hladni vodi, da nastane bistra in stabilna raztopina.

Učinkovito zgoščevanje in sposobnost zadrževanja vode: Povečajte viskoznost materiala, učinkovito zmanjša izhlapevanje vode, in izboljšati delovno učinkovitost.

Dobra stabilnost: Ima dobro stabilnost na kisline, alkalije, in soli, in je primeren za širok razpon pH vrednosti.

Filmotvorni in zaščitni učinki: Po sušenju, tvori močan in prozoren film za zaščito podlage ter preprečuje prodiranje vode in izhlapevanje.

Netoksično in ne draži: Ima dobro biokompatibilnost in je primeren za področje medicine in prehrane.

Prilagodljivost: S spreminjanjem stopnje substitucije in molekulske mase, njegovo delovanje je mogoče prilagoditi različnim zahtevam uporabe.

Specifications of MP 4M 3000 MPAS Low Viscosity Hydroxypropyl Methyl Cellulose HPMC for Ceramic Extrusion Direct

MP 4M 3000 MPAS Low Viscosity HPMC for Ceramic Extrusion

Specifikacije trikov

Kemični klic: Hidroksipropil metil celuloza (HPMC).
Product Code: MP 4M 3000 MPAS.
Prijazen: Low viscosity quality.
Poglej: Bel do umazano bel sipek prah.
Vonj: Brez vonja.

Viskoznost (2% možnost pri 20 ° C): 2,800– 3,200 mPa · s.
Spletna vsebina Methoxy: 19.0– 24.0%.
Hydroxypropoxy Spletna vsebina: 4.0– 12.0%.
pH (2% storitev): 5.0– 8.0.
Vsebnost vlage (max): 5.0%.
Vsebnost pepela (max): 1.5%.

Funkcije učinkovitosti

This HPMC grade uses excellent water retention. It assists ceramic bodies remain convenient throughout shaping and extrusion. The reduced viscosity makes sure smooth blending and also dispersion in clay blends. It decreases rubbing in between fragments. This leads to better circulation via dies and much less endure devices.

The item liquifies conveniently in chilly water. Oblikuje se jasno, secure services without lumps. It does not influence the final shade or shooting habits of ceramic ware. It stresses out easily throughout the early stages of firing. No dangerous deposits remain in the terminated item.

Priporočena uporaba

Utilize this HPMC in extruded ceramic products like tiles, sanitarna oprema, bloki, and technical ceramics. Normal enhancement prices vary from 0.1% do 0.5% by dry weight of the ceramic mix. Always pre-blend the powder with various other dry ingredients before adding water. This avoids clumping and ensures uniform distribution.

Nakupujte na hladnem, dry area in secured containers. Hraniti ločeno od vlage in neposredne sončne svetlobe. Življenjska doba je 24 mesecev, ko so ustrezno shranjeni.

Applications of MP 4M 3000 MPAS Low Viscosity Hydroxypropyl Methyl Cellulose HPMC for Ceramic Extrusion Direct

Applications of MP 4M 3000 MPAS Low Thickness Hydroxypropyl Methyl Cellulose (HPMC) in Ceramic Extrusion

Improved Workability and Smooth Extrusion

MP 4M 3000 MPAS is a reduced viscosity quality of hydroxypropyl methyl cellulose made for ceramic extrusion. It provides ceramic bodies better workability. The material streams efficiently via the die during extrusion. This minimizes stress on the machine and helps prevent blockages.

Attire Eco-friendly Strength

This HPMC grade develops constant green toughness in unfired ceramic parts. It holds particles together without making the mix as well tight. That indicates shapes keep their kind right after extrusion. Breaking or deforming is less most likely to take place throughout handling or drying out.

Upravljano zadrževanje vode

Water management matters a whole lot in ceramic forming. MP 4M 3000 MPAS holds just sufficient water to decrease drying out at the surface area. This stops quick moisture loss that results in cracks. The result is extra also drying out throughout the entire item.

Tidy Fatigue and Reduced Deposit

The additive burns out cleanly during shooting. It leaves extremely little ash or carbon behind. That aids maintain the final product’s shade, gostota, and architectural high quality. No added actions are needed to remove deposits.

Easy Mixing and Compatibility

MP 4M 3000 MPAS mixes well with typical ceramic ingredients like clay, feldspar, and silica. It dissolves promptly in water and spreads uniformly through the batch. You do not need unique equipment to use it. Criterion mixing systems function penalty.

Konstantna učinkovitost v celotnih serijah

Every set of this HPMC does the same way. That offers manufacturers dependable arise from one manufacturing run to the following. Less variant means less denies and smoother procedures on the .

Profil podjetja

Smo vodilni svetovni proizvajalec lahkih betonov in naprednih rešitev iz inženirske pene. Po vsem svetu znan po svoji predanosti raziskavam, inovativnost, in uporabno strokovno znanje, že od začetka leta 2012 nudimo rešitve iz konstruirane pene.

Po vsem svetu lahko dobavimo visokokakovostne dodatke za beton in sorodne izdelke za penobeton.

Podjetje ima strokovni tehnični oddelek in oddelek za nadzor kakovosti, dobro opremljen laboratorij, in opremljen z napredno opremo za testiranje in poprodajnim centrom za pomoč strankam.

Če te zanima, vas prosimo, da nas kontaktirate.

Plačilo

T/T, Western Union, Paypal, Kreditna kartica itd.

Pošiljka

Po zraku, po morju, ekspresno, kot stranke zahtevajo.

5 FAQs of MP 4M 3000 MPAS Low Viscosity Hydroxypropyl Methyl Cellulose HPMC for Ceramic Extrusion Direct

Frequently Asked Questions About MP 4M 3000 MPAS HPMC for Ceramic Extrusion

What is MP 4M 3000 MPAS HPMC?

MP 4M 3000 MPAS is a low viscosity hydroxypropyl methyl cellulose (HPMC) made for ceramic extrusion. It helps bind ceramic powders together so they keep their shape during forming and drying. This grade dissolves easily in water and gives smooth, even flow in the mix.

Why use low viscosity HPMC in ceramics?

Low viscosity HPMC mixes well into ceramic batches without making them too thick. It gives enough binding strength while keeping the paste workable. This helps avoid cracks or breaks during extrusion and drying. The result is a more consistent product with fewer defects.

How much MP 4M 3000 should I add to my ceramic mix?

Običajne ravni uporabe segajo od 0.2% do 0.8% na težo suhega keramičnega prahu. The exact amount depends on your clay type, velikost delcev, and process conditions. Start with a small test batch and adjust based on how the mix feels and performs.

Does this HPMC affect firing results?

št. MP 4M 3000 burns out cleanly during the early stages of firing. It leaves no ash or residue that could harm the final ceramic body. Make sure your heating schedule allows enough time for full removal before reaching high temperatures.

Can I mix MP 4M 3000 z drugimi dodatki?

ja. This HPMC works well with common ceramic additives like plasticizers, disperzijska sredstva, in maziva. Always check compatibility by doing a small trial first. Add HPMC to water before introducing other dry ingredients to ensure even dispersion.