Overview of Concrete Foaming Agent for Lightweight Concrete in Glass Plant Floor Fill

Concrete Foaming Agent for Lightweight Concrete in Glass Plant Floor Fill is a surfactant that generates large quantities of uniform, escuma estable por medios físicos ou químicos. Cando esta escuma se mestura completamente con pasta a base de cemento (cemento, cinzas volantes, etc.) e curado naturalmente ou con vapor, forma un material lixeiro novedoso - formigón de escuma - recheo internamente de numerosas células de aire pechadas.

Features of Concrete Foaming Agent for Lightweight Concrete in Glass Plant Floor Fill

1. Alta relación de multiplicación de espuma: A alta proporción de multiplicación da escuma permite a dilución antes do uso. Un quilo de concentrado xera un gran volume de escuma uniforme, proporcionando importantes aforros de custos.

2. Forte estabilidade da escuma: Produce resiliente, paredes de escuma uniformemente finas que resisten o colapso ou a rotura. Resiste eficazmente a presión da suspensión de cemento, garantindo celas de aire independentes e seladas dentro do produto acabado.

3. Estrutura de poro uniforme e fino: O formigón de espuma presenta unha estrutura interna ideal de microporos esféricos pechados, garantindo propiedades físicas superiores.

4. Baixo Consumo de Material: Consegue graos de densidade e resistencia equivalentes cunha dosificación máis baixa que os produtos estándar do mercado, reducindo custos.

5. Ecolóxico e seguro: Formulación neutra, non tóxico, inodoro, e non corrosivos, non supoña danos para o medio ambiente nin para a saúde humana. Clasificado como material de construción verde.

6. Ampla adaptabilidade: Excelente compatibilidade con diversos cementos (incluíndo cemento Portland ordinario e cemento aluminato) e mesturas. Acción de espuma rápida con estabilidade de escuma estendida.

Specifications of Concrete Foaming Agent for Lightweight Concrete in Glass Plant Floor Fill

Specs of Concrete Foaming Representative for Lightweight Concrete in Glass Plant Flooring Fill

Revisión do produto

This frothing agent is specifically made for creating light-weight concrete made use of as floor fill in glass factory. Produce estable, burbullas de aire consistentes na mestura. This lowers the total weight while maintaining enough toughness for industrial use.

Trick Performance Includes

The representative develops fine, closed-cell foam that mixes well with cement and water. It offers regular thickness throughout huge puts. The resulting concrete resists fracturing under thermal tension– a common problem in warm glass plant atmospheres. It likewise helps in reducing warmth transfer via the flooring, boosting energy effectiveness.

Physical and Chemical Properties

– Aparición: Líquido ámbar claro a claro
– valor de pH: 6.5– 8.0.
– Densidade: 1.02– 1.06 g/cm catro en 25 °C.
– Solubilidade: Totalmente soluble en auga.
– Relación de expansión da espuma: 20:1 a 30:1.
– Tempo de drenaxe: Acabado 60 mins (steady foam structure).

Pautas de uso

Mix the foaming agent with water initially using a foam generator. Then mix the foam into the concrete slurry. Common dosage is 0.5– 1.5 kg per cubic meter of ended up light-weight concrete. Exact quantities rely on target density, which generally varies from 400 a 1,200 kg/m TRES. Always test small batches before full-blown application.

Espazo de almacenamento e manipulación

Almacenar nun lugar fresco, lugar seco lonxe do sol directo. Manter os recipientes pechados cando non estean en uso. Service life is twelve month in initial product packaging. Mantéñase lonxe da conxelación. Poñer fundas de roupa de man e protección ocular durante a manipulación. Rinse promptly if contact accompanies skin or eyes.

Applications of Concrete Foaming Agent for Lightweight Concrete in Glass Plant Floor Fill

Applications of Concrete Frothing Agent for Lightweight Concrete in Glass Plant Floor Load

Why Utilize Foamed Concrete on Glass Plant Floors?

Glass factory require stable, nivel, and light-weight floor loads. Heavy standard concrete includes too much tons to the building framework. Foamed concrete solves this issue. It utilizes a concrete lathering representative to develop air bubbles inside the mix. This makes the last product much lighter while maintaining adequate toughness for flooring support.

Key Conveniences in Method

Weight decrease is the biggest advantage. Pode ser formigón espumado 25% a 75% lighter than regular concrete. This lowers stress on foundations and assistance beam of lights. In glass plants, where huge machinery and heats are common, lowering dead tons matters a lot.

The material also streams easily right into place. Employees pump it straight onto the subfloor. It self-levels and fills voids without added labor. This saves time during installation. The smooth surface area it develops works well under finished floor covering or as a base for devices pads.

An additional strength is thermal insulation . Air pockets in foamed concrete reduce warm transfer. Glass plants frequently run hot heaters close by. A flooring fill that withstands warmth movement helps manage indoor temperatures and cuts energy expenses.

Setup Simplicity

Using a concrete lathering representative simplifies the entire procedure. You blend it with cement, auga, e area. The foam increases the mix immediately. Non se necesitan dispositivos únicos– simply basic pumping gear. Curing takes much less time than with dense concrete. Job can relocate faster without waiting days for the floor to set.

This technique additionally cuts waste. You make use of only what you require. There’s little remaining product. For large commercial spaces like glass plants, that suggests reduced product prices and cleaner work websites.

Perfil da empresa

Somos o líder mundial en formigón lixeiro e solucións avanzadas de escuma de enxeñería. Coñecida mundialmente pola súa aposta pola investigación, innovación, e experiencia aplicada, proporcionamos solucións de escuma de enxeñería desde principios de 2012.

Podemos proporcionar aditivos de formigón de alta calidade e produtos relacionados con formigón espumoso en todo o mundo.

A empresa ten un departamento técnico profesional e un departamento de supervisión de calidade, un laboratorio ben equipado, e equipado con equipos de proba avanzados e centro de atención ao cliente posvenda.

Se estás interesado, non dubide en contactar connosco.

Pagamento

T/T, Western Union, Paypal, Tarxeta de crédito, etc.

Envío

Por aire, polo mar, por expreso, como solicitan os clientes.

5 FAQs of Concrete Foaming Agent for Lightweight Concrete in Glass Plant Floor Fill

Preguntas frecuentes: Concrete Foaming Agent for Lightweight Floor Fill in Glass Plants

Que é un axente espumante de formigón?

Un axente espumante de formigón é un líquido engadido ás mesturas de cemento. Crea pequenas burbullas de aire dentro do formigón. These bubbles make the final product lighter and easier to place. O resultado é un formigón lixeiro que aínda mantén unha boa resistencia.

Why use lightweight concrete on glass plant floors?

Glass plants need stable, flat floors. Heavy traditional concrete adds too much weight to the structure. Lightweight concrete reduces load on the building. It also helps with thermal insulation and makes leveling faster during installation.

How does the foaming agent affect floor performance?

The foaming agent lowers concrete density without hurting its ability to support loads. Floors stay strong but weigh less. This improves workability and speeds up pouring. A superficie permanece lisa, which is important for glass handling and equipment movement.

Is the foamed concrete safe for industrial use?

Si. Cando se mesturan correctamente, foamed concrete meets industrial standards. It resists cracking and settling better than some lightweight alternatives. It also bonds well with reinforcement if needed. Siga sempre as instrucións de mestura do fabricante para obter os mellores resultados.

How is the foaming agent applied during floor fill?

The agent is mixed with water first, then blended into the cement slurry using a foam generator. The foamed mixture is poured directly onto the subfloor. No special tools are needed—standard concrete placement methods work fine. Curing time is similar to regular concrete, but always check local conditions.