Overview of Concrete Foaming Agent for Lightweight Concrete in Glass Plant Floor Fill

Concrete Foaming Agent for Lightweight Concrete in Glass Plant Floor Fill is a surfactant that generates large quantities of uniform, matatag na foam sa pamamagitan ng pisikal o kemikal na paraan. Kapag ang foam na ito ay lubusang hinaluan ng cement-based slurry (semento, fly ash, atbp.) at natural na gumaling o may singaw, ito ay bumubuo ng isang nobelang magaan na materyal—foam concrete—na panloob na puno ng maraming closed air cells.

Features of Concrete Foaming Agent for Lightweight Concrete in Glass Plant Floor Fill

1. Mataas na Foam Multiplication Ratio: Ang mataas na foam multiplication ratio ay nagbibigay-daan sa pagbabanto bago gamitin. Ang isang kilo ng concentrate ay bumubuo ng isang malaking dami ng unipormeng foam, naghahatid ng makabuluhang pagtitipid sa gastos.

2. Malakas na Foam Stability: Gumagawa ng nababanat, pantay na pinong foam wall na lumalaban sa pagbagsak o pagkabasag. Epektibong lumalaban sa presyon mula sa slurry ng semento, tinitiyak ang mga independiyente at selyadong air cell sa loob ng tapos na produkto.

3. Uniform at Fine Pore Structure: Ang foam concrete ay nagpapakita ng perpektong panloob na istraktura ng closed spherical micro-pores, ginagarantiyahan ang higit na mataas na pisikal na katangian.

4. Mababang Pagkonsumo ng Materyal: Nakakamit ang katumbas na mga marka ng density at lakas na may mas mababang dosis kaysa sa karaniwang mga produkto sa merkado, pagbabawas ng mga gastos.

5. Eco-friendly at ligtas: Neutral na pagbabalangkas, hindi nakakalason, walang amoy, at hindi kinakaing unti-unti, hindi nagdudulot ng pinsala sa kapaligiran o kalusugan ng tao. Inuri bilang isang berdeng materyales sa gusali.

6. Malawak na kakayahang umangkop: Napakahusay na pagkakatugma sa iba't ibang mga semento (kabilang ang ordinaryong Portland cement at aluminate cement) at mga halo. Mabilis na pagkilos ng foaming na may pinahabang katatagan ng foam.

Specifications of Concrete Foaming Agent for Lightweight Concrete in Glass Plant Floor Fill

Specs of Concrete Foaming Representative for Lightweight Concrete in Glass Plant Flooring Fill

Pagsusuri ng Produkto

This frothing agent is specifically made for creating light-weight concrete made use of as floor fill in glass factory. It produces stable, pare-pareho ang mga bula ng hangin sa halo. This lowers the total weight while maintaining enough toughness for industrial use.

Trick Performance Includes

The representative develops fine, closed-cell foam that mixes well with cement and water. It offers regular thickness throughout huge puts. The resulting concrete resists fracturing under thermal tension– a common problem in warm glass plant atmospheres. It likewise helps in reducing warmth transfer via the flooring, boosting energy effectiveness.

Physical and Chemical Properties

– Hitsura: Clear to light amber liquid
– halaga ng pH: 6.5– 8.0.
– Densidad: 1.02– 1.06 g/cm apat sa 25 ° C.
– Solubility: Ganap na natutunaw sa tubig.
– Foam expansion ratio: 20:1 sa 30:1.
– Drainage time: Tapos na 60 min (steady foam structure).

Mga Alituntunin sa Paggamit

Mix the foaming agent with water initially using a foam generator. Then mix the foam into the concrete slurry. Common dosage is 0.5– 1.5 kg per cubic meter of ended up light-weight concrete. Exact quantities rely on target density, which generally varies from 400 sa 1,200 kg/m TATLO. Always test small batches before full-blown application.

Imbakan na espasyo at Paghawak

Mag-imbak sa isang cool, tuyong lugar na malayo sa direktang sikat ng araw. Maintain containers sealed when not in use. Service life is twelve month in initial product packaging. Manatiling malinis sa pagyeyelo. Put on handwear covers and eye defense throughout handling. Rinse promptly if contact accompanies skin or eyes.

Applications of Concrete Foaming Agent for Lightweight Concrete in Glass Plant Floor Fill

Applications of Concrete Frothing Agent for Lightweight Concrete in Glass Plant Floor Load

Why Utilize Foamed Concrete on Glass Plant Floors?

Glass factory require stable, antas, and light-weight floor loads. Heavy standard concrete includes too much tons to the building framework. Foamed concrete solves this issue. It utilizes a concrete lathering representative to develop air bubbles inside the mix. This makes the last product much lighter while maintaining adequate toughness for flooring support.

Key Conveniences in Method

Weight decrease is the biggest advantage. Lathered concrete can be 25% sa 75% lighter than regular concrete. This lowers stress on foundations and assistance beam of lights. In glass plants, where huge machinery and heats are common, lowering dead tons matters a lot.

The material also streams easily right into place. Employees pump it straight onto the subfloor. It self-levels and fills voids without added labor. This saves time during installation. The smooth surface area it develops works well under finished floor covering or as a base for devices pads.

An additional strength is thermal insulation . Air pockets in foamed concrete reduce warm transfer. Glass plants frequently run hot heaters close by. A flooring fill that withstands warmth movement helps manage indoor temperatures and cuts energy expenses.

Setup Simplicity

Using a concrete lathering representative simplifies the entire procedure. You blend it with cement, tubig, at buhangin. The foam increases the mix immediately. Walang mga natatanging device ang kailangan– simply basic pumping gear. Curing takes much less time than with dense concrete. Job can relocate faster without waiting days for the floor to set.

This technique additionally cuts waste. You make use of only what you require. There’s little remaining product. For large commercial spaces like glass plants, that suggests reduced product prices and cleaner work websites.

Profile ng Kumpanya

Kami ang pandaigdigang nangunguna sa magaan na kongkreto at advanced engineered foam solution. Kilala sa buong mundo para sa kanyang pangako sa pananaliksik, pagbabago, at inilapat na kadalubhasaan, nagbibigay kami ng mga engineered foam solution mula noong unang bahagi ng 2012.

Makakapagbigay kami ng de-kalidad na kongkretong admixture at mga produktong nauugnay sa foam concrete sa buong mundo.

Ang kumpanya ay may isang propesyonal na departamentong teknikal at departamento ng pangangasiwa ng kalidad, isang mahusay na kagamitang laboratoryo, at nilagyan ng advanced na kagamitan sa pagsubok at after-sales customer service center.

Kung interesado ka, mangyaring huwag mag-atubiling at makipag-ugnayan sa amin.

Pagbabayad

T/T, Western Union, Paypal, Credit Card atbp.

Pagpapadala

Sa pamamagitan ng hangin, sa pamamagitan ng dagat, sa pamamagitan ng express, bilang kahilingan ng mga customer.

5 FAQs of Concrete Foaming Agent for Lightweight Concrete in Glass Plant Floor Fill

Mga Madalas Itanong: Concrete Foaming Agent for Lightweight Floor Fill in Glass Plants

Ano ang kongkretong foaming agent?

Ang kongkretong foaming agent ay isang likidong idinagdag sa mga pinaghalong semento. It creates tiny air bubbles inside the concrete. These bubbles make the final product lighter and easier to place. The result is lightweight concrete that still holds good strength.

Why use lightweight concrete on glass plant floors?

Glass plants need stable, flat floors. Heavy traditional concrete adds too much weight to the structure. Lightweight concrete reduces load on the building. It also helps with thermal insulation and makes leveling faster during installation.

How does the foaming agent affect floor performance?

The foaming agent lowers concrete density without hurting its ability to support loads. Floors stay strong but weigh less. This improves workability and speeds up pouring. The surface remains smooth, which is important for glass handling and equipment movement.

Is the foamed concrete safe for industrial use?

Oo. When mixed correctly, foamed concrete meets industrial standards. It resists cracking and settling better than some lightweight alternatives. It also bonds well with reinforcement if needed. Always follow the manufacturer’s mixing instructions for best results.

How is the foaming agent applied during floor fill?

The agent is mixed with water first, then blended into the cement slurry using a foam generator. The foamed mixture is poured directly onto the subfloor. No special tools are needed—standard concrete placement methods work fine. Curing time is similar to regular concrete, but always check local conditions.