Aditivi za lagani beton | Sredstva za pjenjenje visokih performansi za celularni beton
Pjenasti beton is also known as foamed cement, lagani beton, itd. It is a new type of building energy-saving material that is waste-friendly, ekološki prihvatljiv, uštedu energije, inexpensive and non-combustible. Lagani beton (pjenasti beton) is to introduce air or nitrogen, carbon dioxide, oxygen and other gases into the concrete slurry chemically or physically according to the application needs—specific products with considerable strength. Proizvodnja lakog betona (pjenasti beton) je obično mehanička metoda za pripremu vodenog sredstva za pjenjenje u pjenu. The specific operation is: make the foaming agent aqueous solution into foam by automated means and then add the foam to the slurry composed of silicon material, calcium material, water and various admixtures, itd., after mixing and stirring, pouring moulding, curing Made.
As a new type of energy-saving and environmentally friendly building materials, scholars at home and abroad have done a lot of research and development to make it widely used in wall materials. The advantages are low density, lagana, toplinska izolacija, zvučna izolacija, earthquake resistance and other properties. Međutim, it still has certain defects, such as low strength, pucanje, upijanje vode, itd. Stoga, to further expand its application field, further research is needed in foaming agent, mix ratio, process flow, equipment and so on. It can be applied to retaining walls, construction of sports fields and track and field runways, sandwich members, used as composite wall panels, pipeline backfill, lean concrete filling, roof slopes, support for storage tank feet, itd. Međutim, its application has defects such as low strength, cracking and water absorption, and its performance needs to be further improved.
Lightweight concrete features:
1. Lightweight and strong
Lightweight concrete has a low density. The density grade of commonly used lightweight concrete is 300-1200kg / m3, which is equivalent to 1 / 5-1 / 10 od običnog betona. The compressive strength is higher than 0.25Mpa, and different depths can be produced according to the design requirements of the building Of lightweight concrete (pjenasti beton) proizvoda.
2. Insulation
Because the lightweight concrete contains a large number of closed and small pores, the thermal performance is excellent, and the lightweight concrete with a density grade of 260-1200kg / m3 has a thermal conductivity of 0.06-0.3W (M.K).
3. Izvrsna zvučna izolacija i otpornost na požar
Lightweight concrete is a porous material with a sound absorption capacity of 0.09-0.19%. It has excellent sound insulation performance. It can be used as an audio insulation layer in building floors and highway sound insulation boards, underground building top floors and other fields.
4. Low elastic shock resistance
The porosity of the lightweight concrete makes it have a low modulus of elasticity so that it has an excellent absorption and dispersion effect on impact loads.
The lightweight concrete mix ratio
The design of the mix ratio of lightweight concrete should mainly meet the requirements of compressive strength, density and consistency, and be based on the principle of rational use of materials and saving of cement. When necessary, special requirements for particular properties (such as elastic modulus, carbonization, and frost resistance) should be met.
The mix ratio of lightweight concrete should be determined by calculation and trail mix.
The light and coarse aggregate in the mix ratio of lightweight aggregate concrete should adopt the same type of lightweight aggregate. When the structural insulation light aggregate concrete and its products are mixed with light coarse aggregate of coal (furnace) šljaka, its content should not be higher than 30% of the total coarse aggregate. The carbon content of coal (furnace) residue should not be higher than 10%. When blending another kind of coarse aggregate to improve specific properties, the reasonable blending amount must be determined through experiments.
Cie-China.org vodeći je dobavljač aditiva za pjenasti beton koji nudi sredstvo za pjenjenje betona, superplastifikator,pojačivač čvrstoće pjenastog betona za lagani beton, CLC blokovi. Ako tražite sredstvo za stvaranje pjene, slobodno kontaktirajte nas.