Uzlabota virsmas apdare: Piedevas, piemēram, gaisu piesaistošas ​​vielas, var uzlabot betona apdari un izskatu, novēršot tādus defektus kā plaisāšana, šūnveidīgs, vai virsmas putekļošana, nodrošinot gludumu, profesionālas kvalitātes virsma.

Specification of Concrete Admixture RDP Redispersible Polymer for External Wall Putty and Skim Coat

Requirements of Concrete Admixture RDP Redispersible Polymer

Produkta apskats

RDP Redispersible Polymer Powder is a vital additive used in external wall surface putty and skim layer formulas. Tas uzlabo saikni, daudzpusība, un ūdensizturība. This powder liquifies easily in water and creates a strong polymer movie once completely dry.

Slepenās rezidences

– Skaties : Balts brīvi plūstošs pulveris
– Ciets saturs : ≥ 98%.
– Pelnu tīmekļa saturs : 10– 15%.
– Masas biezums : 0.4– 0.6 g/cm TRĪS.
– Fragmenta izmērs : ≤ 80 µm.
– Minimālais plēves veidošanās temperatūras līmenis (MFFT) : 0– 5 °C.

Veiktspējas priekšrocības

This admixture boosts bond stamina between the layer and substratum. It lowers cracking caused by thermal motion or drying out shrinking. The polymer enhances workability and extends open time throughout application. Finished surface areas show better abrasion resistance and lasting longevity. Water absorption drops dramatically, which assists protect against efflorescence and mold growth.

Ieteicamā deva

Lietošana 2– 5% by weight of overall dry mix for conventional external wall putty. For high-performance skim layers, dosage might increase to 6%. Always test small sets first to verify efficiency under regional problems.

Pārkraušanas un uzglabāšanas telpa

Glabājiet lieliskā vietā, sausā vietā prom no mitruma. Saglabājiet maisus noslēgtus, kad tos neizmantojat. Service life is one year if stored properly. Prevent exposure to guide sunshine or high moisture. Usage clean tools to avoid contamination. Apstrādes laikā uzvelciet cimdus un acu aizsargus.

Applications of Concrete Admixture RDP Redispersible Polymer for External Wall Putty and Skim Coat

Applications of Concrete Admixture RDP Redispersible Polymer for External Wall Surface Putty and Skim Coat

Jaudīgāks, Smoother Wall Surfaces with Better Performance

LAP (Atkārtoti disperģējams polimēru pulveris) is a key active ingredient in premium exterior wall putty and skim layer products. Iejaucot tieši pamatmateriālā, it forms an adaptable polymer film after drying out. This film binds all bits with each other, making the finish a lot stronger.

Daudz labāka saķere ir viena būtiska priekšrocība. The putty sticks firmly to concrete, ķieģelis, or plaster surface areas. It stands up to peeling off or splitting also under temperature level adjustments or moisture exposure. This makes fixings much less frequent and saves money and time over the long-term.

Ūdensizturība ievērojami uzlabojas. LAP samazina ūdens absorbciju, which helps secure the wall from rain, mitrums, and mold development. The surface area remains cleaner and lasts longer without blistering or powdering.

Workability obtains less complicated also. Contractors discover the mix smoother to use by trowel or spray. It spreads out equally and levels well, offering an uniform finish with less marks. Drying out time continues to be sensible– quick sufficient for following steps but not too fast to trigger problems.

Versatility issues outdoors. Buildings naturally move a little due to weather or resolving. RDP includes elasticity to the coating so it relocates a little without breaking. This prevents hairline fractures that usually appear in rigid surfaces.

For both new builds and remodellings, utilizing RDP-enhanced putty or skim coat supplies an expert result. It functions well on outside wall surfaces that face sunlight, vējš, or rainfall daily. The final surface additionally accepts paint better, providing a cleaner look with enhanced sturdiness.

Producers select RDP due to the fact that it mixes conveniently with concrete, kaļķi, un pildvielas. It does not need unique devices or processes. Simply include it to the dry mix, and the performance upgrades come immediately when water is added site.

Uzņēmuma profils

Mēs esam pasaules līderi vieglā betona un modernu putuplasta risinājumu jomā. Pasaulē pazīstams ar savu apņemšanos veikt pētniecību, inovācijas, un pielietotās zināšanas, mēs esam nodrošinājuši inženierijas putu risinājumus kopš 2012. gada sākuma.

Mēs varam piegādāt augstas kvalitātes betona piedevas un putu betona produktus visā pasaulē.

Uzņēmumam ir profesionāla tehniskā nodaļa un kvalitātes uzraudzības nodaļa, labi aprīkota laboratorija, un aprīkots ar modernu testēšanas aprīkojumu un pēcpārdošanas klientu apkalpošanas centru.

Ja jūs interesē, lūdzu, jūtieties brīvi un sazinieties ar mums.

Maksājums

T/T, Western Union, Paypal, Kredītkarte utt.

Sūtījums

Pa gaisu, pa jūru, ar eksprespasta palīdzību, pēc klientu pieprasījuma.

5 FAQs of Concrete Admixture RDP Redispersible Polymer for External Wall Putty and Skim Coat

What is RDP and why is it used in wall putty?

LAP stands for Redispersible Polymer Powder. It is a key additive in external wall putty and skim coat. Ja sajauc ar ūdeni, tā veido elastīgu plēvi, kas saista materiālus kopā. Tas uzlabo adhēziju, ūdens izturība, and overall durability of the coating.

How does RDP improve putty performance?

RDP makes the putty stick better to walls. It also reduces cracking and powdering over time. The polymer film fills tiny gaps in the mixture, which blocks moisture from getting in. Tā rezultātā, the surface stays strong and looks smooth even under weather stress.

Can RDP be used in both interior and exterior applications?

Jā, but it is especially valuable for external walls. Outdoor surfaces face rain, saule, un temperatūras izmaiņas. RDP helps the putty handle these conditions without failing. For indoor use, it still adds strength and smoothness, though the demands are lower.

What happens if I skip RDP in my putty mix?

Bez LAP, the putty may not hold well to the wall. It can become brittle, crack easily, or wash away in rain. You might also see dusting or flaking after drying. Adding RDP ensures long-lasting results and saves repair costs later.

Cik daudz LAP man vajadzētu pievienot savam maisījumam?

The right amount depends on your base formula and desired performance. Parasti, 2% uz 5% by weight of total dry ingredients works well. Vienmēr ievērojiet ražotāja norādījumus. Pārāk mazs rezultāts ir vājš; too much may affect workability or cost unnecessarily.