Li-additives tsa Konkreite tse bobebe | Li-Agents tse Foaming tse Phahameng ka ho Fetisisa bakeng sa Konkreite ea Cellular
Foromo ea konkreite e phophomang maeba ke thepa e sebelisoang ho etsa lihlahisoa tsa konkreite tse bobebe. Ena ke motsoako oa lik'hemik'hale o kenyelletsang metsi, samente le lisebelisoa tse ling. The process is relatively simple.
Ka kakaretso, the formula for concrete foaming agent is composed of a mixture of alkaline and synthetic agents. These ingredients have been selected to produce a stable foam.
The amount of foaming agent required is calculated according to the bulk density requirement. A suitable ratio of 0.6 ho 0.8% by weight of the cement is preferred.
When mixing with the mortar, the bigger bubbles tend to collapse first. For the best results, the bubble size should be ideally round. Ho seng joalo, the pore structure may be unbalanced, resulting in unsuitable properties.
Ho feta moo, foam concrete is produced using a low water-cement ratio. High ratios of 0.5 reduce the setting time, but decrease the strength of the concrete. Low water-cement ratio enables the production of air bubbles, which contribute to foam stability.
Ntle le moo, a bitumen emulsion can be added to the mixture before foaming. This is done to increase the plasticity of the mortar and render the foam more uniform.
The proportion of coarse fillers in the mixture is also important. Using too large a percentage of coarse fillers produces uneven pore structures, reducing the strength of the foam.
Qetellong, a stabilizer is used in the mixture. Ka tloaelo, a foam stabilizer is made up of hydroxypropyl methyl cellulose (40%) and triethanolamine (20%).
If you are looking for a more economical and eco-friendly form of foamed concrete, you can choose the protein based foaming agent. This kind of foaming agent has been developed by combining multiple hydrolyzes with enzymatic components.