Introduction to Hydroxypropyl Methyl Cellulose HPMC PVA PCE RDP VAE Powder PP Fibre for Wall Putty Mortar Binder Tile Adhesive Gypsum

Hidroksipropil metilceluloza (HPMC), čiji je kineski naziv hidroksipropil metilceluloza, je polusintetika, nejonski eter celuloze dobijen hemijskom modifikacijom prirodne celuloze. Ovaj bijeli prah može formirati prozirnu viskoznu otopinu nakon rastvaranja u vodi. Ima odlično zgušnjavanje, zadržavanje vode, stabilnost i svojstva stvaranja filma. To je nezamjenjiv multifunkcionalni aditiv u mnogim poljima kao što je građevinarstvo.

Characteristics and advantages of Hydroxypropyl Methyl Cellulose HPMC PVA PCE RDP VAE Powder PP Fibre for Wall Putty Mortar Binder Tile Adhesive Gypsum

Odlična rastvorljivost u vodi: Može se brzo otopiti u hladnoj vodi kako bi se formirala bistra i stabilna otopina.

Efikasno zgušnjavanje i sposobnost zadržavanja vode: Povećajte viskozitet materijala, efikasno smanjuju isparavanje vode, i poboljšati radnu efikasnost.

Dobra stabilnost: Ima dobru stabilnost na kiseline, alkalije, i soli, i pogodan je za širok raspon pH vrijednosti.

Filmotvorni i zaštitni efekti: Nakon sušenja, formira čvrst i proziran film koji štiti podlogu i sprečava prodiranje vode i isparavanje.

Netoksičan i neiritantan: Ima dobru biokompatibilnost i pogodan je za područja medicine i hrane.

Prilagodljivost: Promjenom stepena supstitucije i molekularne težine, njegove performanse se mogu prilagoditi kako bi zadovoljile različite zahtjeve primjene.

Specifications of Hydroxypropyl Methyl Cellulose HPMC PVA PCE RDP VAE Powder PP Fibre for Wall Putty Mortar Binder Tile Adhesive Gypsum

Product Specifications for Building And Construction Additives

Hidroksipropil metil celuloza (HPMC)

HPMC je bijelo, unsmelling powder used to enhance water retention and workability. It aids regulate enlarging and avoids drooping in wall putty and ceramic tile adhesives. The regular viscosity variety is 40,000– 100,000 mPa · s. Ash web content stays below 5%. Fragment dimension passes through an 80-mesh sieve.

polivinil alkohol (PVA) Puder

PVA prah improves adhesion and versatility. It dissolves in water and creates a strong movie after drying out. Usual use levels are 1– 3% po težini. The level of hydrolysis is normally 87– 89%. Residue on an 80-mesh sieve is under 2%.

Polikarboksilat eter (PCE) Superplastifikator

PCE lowers water need while keeping good circulation. It increases stamina and workability in plaster and cement-based mixes. Strong material has to do with 98%. Chloride web content is much less than 0.1%. Doza sorti od 0.1% to 0.3%.

Redisperzibilni polimerni prah (RDP)

RDP enhances bond strength, prilagodljivost, i otpornost na vodu. It redisperses in water to develop a polymer film. Vinil acetat-etilen (FEET) types prevail. Minimum film-forming temperature level is around 0– 5 °C. Ash web content is listed below 10%.

Vinil acetat-etilen (FEET) Kopolimer

VAE prah provides exceptional bond to various substrates. Dobro funkcionira u suhim mješavinama. Glass change temperature is typically– 5 °C do 5 °C. Izvrsnost: 99% goes through a 100-mesh sieve.

Polipropilen (PP) Vlakna

PP vlakna control splitting and include tensile strength. Length arrays from 3 mm to 12 mm. Size is about 18– 40 mikrona. Melting point is near 165 °C. They distribute uniformly in wet mortar without clumping.

Applications of Hydroxypropyl Methyl Cellulose HPMC PVA PCE RDP VAE Powder PP Fibre for Wall Putty Mortar Binder Tile Adhesive Gypsum

Trick Ingredients for High-Performance Structure Materials

Hidroksipropil metil celuloza (HPMC)

HPMC boosts water retention in wall surface putty, ljepilo za keramičke pločice, i gips. This aids seal or gypsum hydrate totally. It additionally provides much better workability and prevents sagging on upright surfaces.

polivinil alkohol (PVA) Puder

PVA powder improves attachment and flexibility. It makes mortars stick better to tiles, beton, ili gips. It also lowers breaking throughout drying out.

Polikarboksilat eter (PCE)

PCE is a superplasticizer. It lowers water use while keeping the mix liquid. Ovo dovodi do jačeg, denser mortars with less shrinkage.

Redisperzibilni polimerni prah (RDP)

RDP boosts bond stamina and flexibility once the mortar dries. It functions well in floor tile adhesives and exterior wall surface putties. It additionally boosts resistance to weather and aging.

Plastični acetat etilen (FEET) Puder

VAE powder uses great flexibility and adhesion at inexpensive. It assists tile adhesives hold strongly even on hard-to-bond surfaces like old tiles or smooth concrete.

Polipropilen (PP) Vlakna

PP fibers manage plastic shrinkage cracks. They add tensile strength and improve impact resistance. These fibers mix easily into gypsum, kit, or thin-set mortars without clumping.

All these additives work together or alone to satisfy various job requirements. HPMC maintains water in the mix. PVA and RDP make bonds more powerful. PCE makes the mix flow better with much less water. VAE provides strong efficiency at lower cost. PP fibers stop very early fractures. Home builders choose the best mix based on climate, vrsta površine, and needed durability. Each item brings clear advantages to modern-day dry-mix mortars utilized each day on construction sites.

Profil kompanije

Mi smo globalni lider u lakom betonu i naprednim rješenjima od pjene. Globalno poznat po svojoj posvećenosti istraživanju, inovacija, i primenjenu ekspertizu, nudimo konstruirana rješenja pjene od početka 2012. godine.

Možemo isporučiti visokokvalitetne dodatke za beton i proizvode povezane s pjenastim betonom širom svijeta.

Kompanija ima stručno tehničko odjeljenje i odjel za nadzor kvaliteta, dobro opremljenu laboratoriju, i opremljen naprednom opremom za testiranje i servisnim centrom nakon prodaje.

Ako ste zainteresovani, slobodno nas kontaktirajte.

Plaćanje

T/T, Western Union, Paypal, Kreditna kartica itd.

Isporuka

Zrakom, morem, ekspresno, po zahtevu kupaca.

5 FAQs of Hydroxypropyl Methyl Cellulose HPMC PVA PCE RDP VAE Powder PP Fibre for Wall Putty Mortar Binder Tile Adhesive Gypsum

Često postavljana pitanja

Šta je HPMC i zašto se koristi u zidnom kitu?

HPMC (Hidroksipropil metil celuloza) helps wall putty stay smooth and easy to spread. Dobro drži vodu, so the putty dries slowly and evenly. This stops cracks from forming and makes the surface stronger.

Kako PVA prah poboljšava ljepilo za pločice?

PVA (polivinil alkohol) powder boosts stickiness and flexibility in tile adhesive. It helps the adhesive bond tightly to both the tile and the wall. Even when wet or under stress, veza ostaje jaka.

Kakvu ulogu PCE igra u malteru?

PCE (Polikarboksilat eter) je superplastifikator. It cuts down the amount of water needed in mortar while keeping it workable. Less water means higher strength and better durability once the mortar sets.

Zašto dodati RDP ili VAE prah u gipsane proizvode?

RDP (Redisperzibilni polimerni prah) i VAE (Vinil acetat etilen) make gypsum products tougher and more flexible. They improve adhesion, smanjiti zaprašivanje, and help the material resist impact and moisture.

Do PP fibers really help in wall putty or mortar?

Da. PP (Polipropilen) fibers control tiny cracks that happen during drying or shrinking. They spread stress across the mix, which keeps the surface intact and reduces surface flaws. Rezultat je glatkiji, dugotrajniji završetak.