Introduction to Hydroxypropyl Methyl Cellulose HPMC PVA PCE RDP VAE Powder PP Fibre for Wall Putty Mortar Binder Tile Adhesive Gypsum

Hydroksypropylmetylcellulose (HPMC), hvis kinesiske navn er hydroksypropylmetylcellulose, er en halvsyntetisk, ikke-ionisk celluloseeter oppnådd ved kjemisk modifisering av naturlig cellulose. Dette hvite pulveret kan danne en gjennomsiktig viskøs løsning etter oppløsning i vann. Den har utmerket fortykning, vannretensjon, stabilitet og filmdannende egenskaper. Det er et uunnværlig multifunksjonelt tilsetningsstoff på mange områder som konstruksjon.

Characteristics and advantages of Hydroxypropyl Methyl Cellulose HPMC PVA PCE RDP VAE Powder PP Fibre for Wall Putty Mortar Binder Tile Adhesive Gypsum

Utmerket vannløselighet: Det kan raskt løses i kaldt vann for å danne en klar og stabil løsning.

Effektiv fortykkelse og vannretensjonsevne: Øk viskositeten til materialet, reduserer vannfordampning effektivt, og forbedre arbeidseffektiviteten.

God stabilitet: Den har god stabilitet mot syrer, alkalier, og salter, og er egnet for et bredt spekter av pH-verdier.

Filmdannende og beskyttende effekter: Etter tørking, den danner en tøff og gjennomsiktig film for å beskytte underlaget og forhindre vanninntrengning og fordampning.

Ikke-giftig og ikke-irriterende: Den har god biokompatibilitet og er egnet for feltene medisin og mat.

Justerbarhet: Ved å endre substitusjonsgrad og molekylvekt, ytelsen kan justeres for å møte ulike applikasjonskrav.

Specifications of Hydroxypropyl Methyl Cellulose HPMC PVA PCE RDP VAE Powder PP Fibre for Wall Putty Mortar Binder Tile Adhesive Gypsum

Product Specifications for Building And Construction Additives

Hydroksypropylmetylcellulose (HPMC)

HPMC er en hvit, unsmelling powder used to enhance water retention and workability. It aids regulate enlarging and avoids drooping in wall putty and ceramic tile adhesives. The regular viscosity variety is 40,000– 100,000 mPa · s. Ash web content stays below 5%. Fragment dimension passes through an 80-mesh sieve.

Polyvinylalkohol (PVA) Pulver

PVA powder improves adhesion and versatility. It dissolves in water and creates a strong movie after drying out. Usual use levels are 1– 3% etter vekt. The level of hydrolysis is normally 87– 89%. Residue on an 80-mesh sieve is under 2%.

Polykarboksylateter (PCE) Supermykner

PCE lowers water need while keeping good circulation. It increases stamina and workability in plaster and cement-based mixes. Strong material has to do with 98%. Chloride web content is much less than 0.1%. Dose varianter fra 0.1% til 0.3%.

Redispergerbart polymerpulver (RDP)

RDP enhances bond strength, tilpasningsevne, og vannmotstand. It redisperses in water to develop a polymer film. Vinylacetat-etylen (FØTTER) types prevail. Minimum film-forming temperature level is around 0– 5 °C. Ash web content is listed below 10%.

Vinylacetat-etylen (FØTTER) Copolymer

VAE pulver provides exceptional bond to various substrates. Den fungerer godt i tørrblandingsmørtel. Glass change temperature is typically– 5 °C til 5 °C. Fortreffelighet: 99% goes through a 100-mesh sieve.

Polypropylen (PP) Fibre

PP fibers control splitting and include tensile strength. Length arrays from 3 mm til 12 mm. Size is about 18– 40 mikron. Melting point is near 165 °C. They distribute uniformly in wet mortar without clumping.

Applications of Hydroxypropyl Methyl Cellulose HPMC PVA PCE RDP VAE Powder PP Fibre for Wall Putty Mortar Binder Tile Adhesive Gypsum

Trick Ingredients for High-Performance Structure Materials

Hydroksypropylmetylcellulose (HPMC)

HPMC boosts water retention in wall surface putty, keramiske fliser lim, og gips. This aids seal or gypsum hydrate totally. It additionally provides much better workability and prevents sagging on upright surfaces.

Polyvinylalkohol (PVA) Pulver

PVA powder improves attachment and flexibility. It makes mortars stick better to tiles, betong, eller gips. It also lowers breaking throughout drying out.

Polykarboksylateter (PCE)

PCE er en supermykner. It lowers water use while keeping the mix liquid. Dette gir sterkere, denser mortars with less shrinkage.

Redispergerbart polymerpulver (RDP)

RDP boosts bond stamina and flexibility once the mortar dries. It functions well in floor tile adhesives and exterior wall surface putties. It additionally boosts resistance to weather and aging.

Plastacetat Etylen (FØTTER) Pulver

VAE powder uses great flexibility and adhesion at inexpensive. It assists tile adhesives hold strongly even on hard-to-bond surfaces like old tiles or smooth concrete.

Polypropylen (PP) Fibre

PP fibers manage plastic shrinkage cracks. De gir strekkfasthet og forbedrer slagfastheten. These fibers mix easily into gypsum, kitt, or thin-set mortars without clumping.

All these additives work together or alone to satisfy various job requirements. HPMC maintains water in the mix. PVA and RDP make bonds more powerful. PCE makes the mix flow better with much less water. VAE provides strong efficiency at lower cost. PP fibers stop very early fractures. Home builders choose the best mix based on climate, type overflate, and needed durability. Each item brings clear advantages to modern-day dry-mix mortars utilized each day on construction sites.

Bedriftsprofil

Vi er verdensledende innen lettbetong og avanserte konstruerte skumløsninger. Kjent globalt for sitt engasjement for forskning, innovasjon, og anvendt ekspertise, vi har levert konstruerte skumløsninger siden begynnelsen av 2012-årene.

Vi kan levere høykvalitets betongtilsetning og skumbetongrelaterte produkter over hele verden.

Selskapet har en profesjonell teknisk avdeling og kvalitetstilsynsavdeling, et velutstyrt laboratorium, og utstyrt med avansert testutstyr og kundeservicesenter etter salg.

Hvis du er interessert, vær så snill og kontakt oss.

Betaling

T/T, Western Union, Paypal, Kredittkort etc.

Forsendelse

Med fly, til sjøs, ved ekspress, som kundene ber om.

5 FAQs of Hydroxypropyl Methyl Cellulose HPMC PVA PCE RDP VAE Powder PP Fibre for Wall Putty Mortar Binder Tile Adhesive Gypsum

Ofte stilte spørsmål

Hva er HPMC og hvorfor brukes det i veggkitt?

HPMC (Hydroksypropylmetylcellulose) helps wall putty stay smooth and easy to spread. Den holder godt på vannet, so the putty dries slowly and evenly. This stops cracks from forming and makes the surface stronger.

How does PVA powder improve tile adhesive?

PVA (Polyvinylalkohol) powder boosts stickiness and flexibility in tile adhesive. It helps the adhesive bond tightly to both the tile and the wall. Even when wet or under stress, the bond stays strong.

What role does PCE play in mortar?

PCE (Polykarboksylateter) is a superplasticizer. It cuts down the amount of water needed in mortar while keeping it workable. Less water means higher strength and better durability once the mortar sets.

Why add RDP or VAE powder to gypsum products?

RDP (Redispergerbart polymerpulver) og VAE (Vinylacetat Etylen) make gypsum products tougher and more flexible. They improve adhesion, reduce dusting, and help the material resist impact and moisture.

Do PP fibers really help in wall putty or mortar?

Ja. PP (Polypropylen) fibers control tiny cracks that happen during drying or shrinking. They spread stress across the mix, which keeps the surface intact and reduces surface flaws. Resultatet er en jevnere, langvarig finish.