Introduction to Hydroxypropyl Methyl Cellulose HPMC PVA PCE RDP VAE Powder PP Fibre for Wall Putty Mortar Binder Tile Adhesive Gypsum

Hydroxypropyl Methylcellulose (HPMC), ຊື່ຂອງຈີນແມ່ນ hydroxypropyl methylcellulose, ເປັນເຄິ່ງສັງເຄາະ, ether ເຊນລູໂລສທີ່ບໍ່ແມ່ນ ionic ທີ່ໄດ້ຮັບໂດຍການດັດແປງ cellulose ທໍາມະຊາດທາງເຄມີ. ຜົງສີຂາວນີ້ສາມາດປະກອບເປັນການແກ້ໄຂ viscous ໂປ່ງໃສຫຼັງຈາກການລະລາຍໃນນ້ໍາ. ມັນມີຄວາມຫນາທີ່ດີເລີດ, ການຮັກສານ້ໍາ, ຄວາມຫມັ້ນຄົງແລະຄຸນສົມບັດສ້າງຮູບເງົາ. ມັນ​ເປັນ​ສານ​ເພີ່ມ​ເຕີມ multifunctional ທີ່​ຂາດ​ບໍ່​ໄດ້​ໃນ​ຫຼາຍ​ຂົງ​ເຂດ​ເຊັ່ນ​: ການ​ກໍ່​ສ້າງ​.

Characteristics and advantages of Hydroxypropyl Methyl Cellulose HPMC PVA PCE RDP VAE Powder PP Fibre for Wall Putty Mortar Binder Tile Adhesive Gypsum

ການລະລາຍນ້ໍາທີ່ດີເລີດ: ມັນສາມາດຖືກລະລາຍຢ່າງໄວວາໃນນ້ໍາເຢັນເພື່ອສ້າງເປັນການແກ້ໄຂທີ່ຊັດເຈນແລະຫມັ້ນຄົງ.

ຄວາມຫນາທີ່ມີປະສິດທິພາບແລະຄວາມສາມາດໃນການຮັກສານ້ໍາ: ເພີ່ມຄວາມຫນືດຂອງວັດສະດຸ, ຫຼຸດຜ່ອນການລະເຫີຍຂອງນ້ໍາຢ່າງມີປະສິດທິພາບ, ແລະປັບປຸງປະສິດທິພາບການເຮັດວຽກ.

ສະຖຽນລະພາບທີ່ດີ: ມັນມີຄວາມຫມັ້ນຄົງທີ່ດີຕໍ່ອາຊິດ, ດ່າງ, ແລະເກືອ, ແລະເຫມາະສົມກັບລະດັບຄວາມກ້ວາງຂອງຄ່າ pH.

ການສ້າງຮູບເງົາແລະຜົນກະທົບປ້ອງກັນ: ຫຼັງຈາກເວລາແຫ້ງ, ມັນປະກອບເປັນຮູບເງົາທີ່ແຂງແລະໂປ່ງໃສເພື່ອປົກປ້ອງຊັ້ນໃຕ້ດິນແລະປ້ອງກັນການເຈາະນ້ໍາແລະການລະເຫີຍ..

ບໍ່ມີສານພິດແລະບໍ່ລະຄາຍເຄືອງ: ມັນມີຄວາມເຂົ້າກັນໄດ້ທາງຊີວະພາບທີ່ດີແລະເຫມາະສົມສໍາລັບຂົງເຂດຢາແລະອາຫານ.

ການປັບຕົວ: ໂດຍການປ່ຽນແປງລະດັບຂອງການທົດແທນແລະນ້ໍາຫນັກໂມເລກຸນ, ປະສິດທິພາບຂອງມັນສາມາດປັບໄດ້ເພື່ອຕອບສະຫນອງຄວາມຕ້ອງການຄໍາຮ້ອງສະຫມັກທີ່ແຕກຕ່າງກັນ.

Specifications of Hydroxypropyl Methyl Cellulose HPMC PVA PCE RDP VAE Powder PP Fibre for Wall Putty Mortar Binder Tile Adhesive Gypsum

Product Specifications for Building And Construction Additives

Hydroxypropyl Methyl Cellulose (HPMC)

HPMC ເປັນສີຂາວ, unsmelling powder used to enhance water retention and workability. It aids regulate enlarging and avoids drooping in wall putty and ceramic tile adhesives. The regular viscosity variety is 40,000– 100,000 mPa · s. Ash web content stays below 5%. Fragment dimension passes through an 80-mesh sieve.

ເຫຼົ້າ Polyvinyl (PVA) ຜົງ

PVA powder improves adhesion and versatility. It dissolves in water and creates a strong movie after drying out. Usual use levels are 1– 3% ໂດຍນ້ໍາຫນັກ. The level of hydrolysis is normally 87– 89%. Residue on an 80-mesh sieve is under 2%.

Polycarboxylate Ether (PCE) superplasticizer

PCE lowers water need while keeping good circulation. It increases stamina and workability in plaster and cement-based mixes. Strong material has to do with 98%. Chloride web content is much less than 0.1%. Dose varieties from 0.1% ກັບ 0.3%.

ຜົງໂພລີເມີທີ່ສາມາດກະຈາຍຄືນໄດ້ (RDP)

RDP enhances bond strength, ການປັບຕົວໄດ້, ແລະການຕໍ່ຕ້ານນ້ໍາ. It redisperses in water to develop a polymer film. Vinyl acetate-ethylene (ຕີນ) types prevail. ອຸນຫະພູມຕໍ່າສຸດຂອງການສ້າງຮູບເງົາແມ່ນປະມານ 0– 5 °C. Ash web content is listed below 10%.

Vinyl Acetate-Ethylene (ຕີນ) Copolymer

VAE powder provides exceptional bond to various substrates. ມັນເຮັດວຽກໄດ້ດີໃນ mortars ປະສົມແຫ້ງ. Glass change temperature is typically– 5 °C ເຖິງ 5 °C. ເລີດ: 99% goes through a 100-mesh sieve.

ໂພລີໂພລີນ (PP) ເສັ້ນໃຍ

ເສັ້ນໃຍ PP control splitting and include tensile strength. Length arrays from 3 mm ເຖິງ 12 ມມ. Size is about 18– 40 ໄມຄຣອນ. Melting point is near 165 °C. They distribute uniformly in wet mortar without clumping.

Applications of Hydroxypropyl Methyl Cellulose HPMC PVA PCE RDP VAE Powder PP Fibre for Wall Putty Mortar Binder Tile Adhesive Gypsum

Trick Ingredients for High-Performance Structure Materials

Hydroxypropyl Methyl Cellulose (HPMC)

HPMC boosts water retention in wall surface putty, ກາວກະເບື້ອງເຊລາມິກ, ແລະ plaster. This aids seal or gypsum hydrate totally. It additionally provides much better workability and prevents sagging on upright surfaces.

ເຫຼົ້າ Polyvinyl (PVA) ຜົງ

PVA powder improves attachment and flexibility. It makes mortars stick better to tiles, ສີມັງ, ຫຼື plaster. It also lowers breaking throughout drying out.

Polycarboxylate Ether (PCE)

PCE is a superplasticizer. It lowers water use while keeping the mix liquid. ອັນນີ້ເຮັດໃຫ້ເຂັ້ມແຂງຂຶ້ນ, denser mortars with less shrinkage.

ຜົງໂພລີເມີທີ່ສາມາດກະຈາຍຄືນໄດ້ (RDP)

RDP boosts bond stamina and flexibility once the mortar dries. It functions well in floor tile adhesives and exterior wall surface putties. It additionally boosts resistance to weather and aging.

ພາດສະຕິກ Acetate Ethylene (ຕີນ) ຜົງ

VAE powder uses great flexibility and adhesion at inexpensive. It assists tile adhesives hold strongly even on hard-to-bond surfaces like old tiles or smooth concrete.

ໂພລີໂພລີນ (PP) ເສັ້ນໃຍ

PP fibers manage plastic shrinkage cracks. They add tensile strength and improve impact resistance. These fibers mix easily into gypsum, putty, or thin-set mortars without clumping.

All these additives work together or alone to satisfy various job requirements. HPMC maintains water in the mix. PVA and RDP make bonds more powerful. PCE makes the mix flow better with much less water. VAE provides strong efficiency at lower cost. PP fibers stop very early fractures. Home builders choose the best mix based on climate, surface kind, and needed durability. Each item brings clear advantages to modern-day dry-mix mortars utilized each day on construction sites.

ຂໍ້ມູນບໍລິສັດ

ພວກເຮົາເປັນຜູ້ນໍາລະດັບໂລກໃນໂຊລູຊັ່ນໂຟມທີ່ເຮັດດ້ວຍຊີມັງນ້ຳໜັກເບົາ ແລະ ທັນສະໄໝ. ເປັນທີ່ຮູ້ຈັກໃນທົ່ວໂລກສໍາລັບຄໍາຫມັ້ນສັນຍາຂອງຕົນໃນການຄົ້ນຄວ້າ, ນະວັດຕະກໍາ, ແລະຄວາມຊໍານານທີ່ນໍາໃຊ້, ພວກ​ເຮົາ​ໄດ້​ຮັບ​ການ​ສະ​ຫນອງ​ການ​ແກ້​ໄຂ​ວິ​ສະ​ວະ​ກໍາ Foam ນັບ​ຕັ້ງ​ແຕ່​ຕົ້ນ​ປີ 2012 ຂອງ​.

ພວກເຮົາສາມາດສະຫນອງການຜະສົມຜະສານຊີມັງທີ່ມີຄຸນນະພາບສູງແລະຜະລິດຕະພັນທີ່ກ່ຽວຂ້ອງກັບຄອນກີດໂຟມທັງຫມົດໃນທົ່ວໂລກ.

ບໍລິສັດມີພະແນກວິຊາການມືອາຊີບແລະພະແນກກວດກາຄຸນນະພາບ, ຫ້ອງທົດລອງທີ່ມີອຸປະກອນດີ, ແລະມີອຸປະກອນການທົດສອບຂັ້ນສູງແລະສູນບໍລິການລູກຄ້າຫລັງການຂາຍ.

ຖ້າເຈົ້າສົນໃຈ, ກະລຸນາຮູ້ສຶກວ່າບໍ່ເສຍຄ່າແລະຕິດຕໍ່ພວກເຮົາ.

ການຈ່າຍເງິນ

T/T, Western Union, Paypal, ບັດເຄຣດິດ ແລະ ອື່ນໆ.

ການຂົນສົ່ງ

ທາງອາກາດ, ທາງທະເລ, ໂດຍດ່ວນ, ຕາມທີ່ລູກຄ້າຮ້ອງຂໍ.

5 FAQs of Hydroxypropyl Methyl Cellulose HPMC PVA PCE RDP VAE Powder PP Fibre for Wall Putty Mortar Binder Tile Adhesive Gypsum

ຄໍາຖາມທີ່ຖາມເລື້ອຍໆ

HPMC ແມ່ນຫຍັງ ແລະເປັນຫຍັງມັນຈຶ່ງຖືກໃຊ້ໃສ່ຝາຜະໜັງ?

HPMC (Hydroxypropyl Methyl Cellulose) ຊ່ວຍໃຫ້ຝາຜະໜັງລຽບງ່າຍ ແລະ ແຜ່ງ່າຍ. ມັນຮັກສານ້ໍາໄດ້ດີ, so the putty dries slowly and evenly. This stops cracks from forming and makes the surface stronger.

How does PVA powder improve tile adhesive?

PVA (ເຫຼົ້າ Polyvinyl) powder boosts stickiness and flexibility in tile adhesive. It helps the adhesive bond tightly to both the tile and the wall. Even when wet or under stress, the bond stays strong.

What role does PCE play in mortar?

PCE (Polycarboxylate Ether) is a superplasticizer. It cuts down the amount of water needed in mortar while keeping it workable. Less water means higher strength and better durability once the mortar sets.

Why add RDP or VAE powder to gypsum products?

RDP (ຜົງໂພລີເມີທີ່ສາມາດກະຈາຍຄືນໄດ້) and VAE (Vinyl Acetate Ethylene) make gypsum products tougher and more flexible. They improve adhesion, reduce dusting, and help the material resist impact and moisture.

Do PP fibers really help in wall putty or mortar?

ແມ່ນແລ້ວ. PP (ໂພລີໂພລີນ) fibers control tiny cracks that happen during drying or shrinking. They spread stress across the mix, which keeps the surface intact and reduces surface flaws. ຜົນໄດ້ຮັບແມ່ນ smoother, ສໍາເລັດຮູບທີ່ຍາວນານ.