Permukaan Akhir yang Ditingkatkan: Bahan tambahan seperti bahan pemasukan udara dapat memperbaiki hasil akhir dan tampilan beton dengan mencegah cacat seperti retak, sarang lebah, atau debu permukaan, memastikan kelancaran, permukaan kelas profesional.

Specification of Concrete Admixture for CLC Block PCE Polycarboxylate Superplasticizer High Performance

Spec of Concrete Admixture for CLC Block: Superplasticizer Polikarboksilat PCE

Pengenalan Barang

This high-performance polycarboxylate ether (PCE) superplasticizer is specially developed for Cellular Lightweight Concrete (CLC) pembuatan blok. Ini meningkatkan kemampuan kerja, minimizes water need, and supports regular foam security during blending and treating.

Fitur Rahasia

– Penurunan air yang tinggi : Decreases water material by approximately 30% without losing flowability.
– Superb slump retention : Maintains mix liquid much longer, which helps in uniform block development.
– Foam-friendly formula : Functions well with light weight aluminum powder or pre-formed foams utilized in CLC.
– Low dose need : Effective at just 0.15%– 0.3% berdasarkan berat beton.
– Bebas klorida dan tidak korosif : Safe for steel support if used.

Data Teknis

– Penampilan: Light yellow to fade brown fluid
– Bahan padat: 20% ± 1%.
– nilai pH: 5– 7.
– Ketebalan (20 °C): 1.05– 1.10 g/cm ENAM.
– Kandungan ion klorida: < 0.01%.

Standar Penggunaan

Add the superplasticizer to the mix water before introducing concrete and aggregates. Mix completely for at the very least 2– 3 menit untuk memastikan sirkulasi merata. Adjust dosage based upon ambient temperature level, concrete type, and preferred density of the CLC block. Constantly perform a small test set prior to full-scale production. Berbelanja di tempat yang luar biasa, tempat yang benar-benar kering jauh dari sinar matahari langsung. Keep container sealed when not being used to avoid contamination or evaporation.

Advantages in CLC Production

Utilizing this PCE admixture brings about smoother surface areas, less spaces, and much better compressive stamina in ended up blocks. It likewise improves very early stamina advancement, permitting faster demolding and higher production effectiveness. The product stays secure throughout a range of common cements and does not conflict with frothing representatives generally used in lightweight concrete systems.

Applications of Concrete Admixture for CLC Block PCE Polycarboxylate Superplasticizer High Performance

Applications of Concrete Admixture for CLC Block PCE Polycarboxylate Superplasticizer

Boosted Workability and Flow

PCE polycarboxylate superplasticizer substantially boosts the flow of concrete paste used in Mobile Lightweight Concrete (CLC) blok. It enables the mix to remain liquid without adding extra water. This assists employees put and form blocks much more conveniently. Hasilnya mulus, uniform texture with less air pockets.

Higher Strength with Much Less Concrete

This admixture improves early and last stamina of CLC blocks. Due to the fact that it minimizes water web content while keeping workability high, the end product becomes denser and stronger. Building contractors can lower concrete use without shedding performance. That lowers material costs and supports greener construction.

Much Better Security and Consistency

PCE-based superplasticizers maintain foam steady throughout blending and healing. In CLC manufacturing, foam top quality straight affects block thickness and insulation. Dengan campuran ini, bubbles remain equally distributed. Blocks appear regular in size, berat, and thermal residential properties batch after set.

Enhanced Surface Area Finish

Blocks made with PCE superplasticizer reveal smoother surface areas and sharper edges. There are fewer cracks or harsh spots. This indicates much less demand for grinding or covering prior to usage. Clean coatings also aid with painting or plastering later on.

Kompatibilitas dan Meringankan Penggunaan

The admixture works well with common foaming agents and other ingredients utilized in CLC systems. It mixes promptly right into the slurry and does not trigger delays in establishing time when dosed appropriately. Manufacturing facilities can integrate it right into existing production lines without major modifications.

Mendukung Pembangunan Berkelanjutan

By allowing lighter blocks with strong efficiency, this superplasticizer helps reduce architectural tons and transportation discharges. It additionally supports energy-efficient buildings many thanks to the boosted thermal insulation of premium CLC blocks.

Profil Perusahaan

Kami adalah pemimpin global dalam solusi beton ringan dan busa rekayasa canggih. Dikenal secara global karena komitmennya terhadap penelitian, inovasi, dan keahlian terapan, kami telah menyediakan solusi busa rekayasa sejak awal tahun 2012.

Kami dapat menyediakan campuran beton berkualitas tinggi dan produk terkait beton busa di seluruh dunia.

Perusahaan ini memiliki departemen teknis profesional dan departemen pengawasan kualitas, laboratorium yang lengkap, dan dilengkapi dengan peralatan pengujian canggih dan pusat layanan pelanggan purna jual.

Jika Anda tertarik, jangan ragu dan hubungi kami.

Pembayaran

T/T, Serikat Barat, Paypal, Kartu Kredit dll.

Pengiriman

Melalui udara, melalui laut, dengan mengungkapkan, sebagai permintaan pelanggan.

5 FAQs of Concrete Admixture for CLC Block PCE Polycarboxylate Superplasticizer High Performance

Frequently Asked Questions About PCE Superplasticizer for CLC Blocks

Apa itu superplasticizer PCE?

PCE adalah singkatan dari polikarboksilat eter. Ini adalah peredam air berkinerja tinggi yang digunakan dalam beton. This admixture helps make the mix more fluid without adding extra water. That means your CLC (Beton Ringan Seluler) blocks stay strong and easy to work with.

Why use PCE in CLC block production?

CLC blocks need a stable, flowable mix to fill molds evenly. PCE improves workability while keeping low water content. This leads to better strength, fewer air pockets, and smoother surfaces on finished blocks.

How much PCE should I add?

Dosage depends on your mix design and materials. Most producers use 0.1% ke 0.3% berdasarkan berat semen. Selalu jalankan uji coba kecil terlebih dahulu. Too little may not help flow; too much can cause segregation or delay setting.

Does PCE affect curing time?

PCE itself does not greatly change curing time. But if your mix has other additives or different cement types, setting might shift slightly. Monitor early strength development during initial test batches.

Can PCE work with foam agents in CLC?

Ya. PCE works well with common protein- or synthetic-based foam agents. It helps maintain foam stability during mixing and pouring. Just make sure both products are compatible—test them together before full-scale use.