ការបញ្ចប់ផ្ទៃដែលប្រសើរឡើង: សារធាតុបន្ថែមដូចជា ភ្នាក់ងារជ្រាបចូលខ្យល់ អាចធ្វើអោយប្រសើរឡើងនូវការបញ្ចប់ និងរូបរាងរបស់បេតុង ដោយការពារការខូចទ្រង់ទ្រាយដូចជាការប្រេះ។, Honeycombing, ឬការសម្អាតផ្ទៃ, ធានាបាននូវភាពរលោង, ផ្ទៃថ្នាក់វិជ្ជាជីវៈ.

Specification of Concrete Admixture for CLC Block PCE Polycarboxylate Superplasticizer High Performance

Spec of Concrete Admixture for CLC Block: PCE Polycarboxylate Superplasticizer

ការណែនាំអំពីធាតុ

This high-performance polycarboxylate ether (PCE) superplasticizer is specially developed for Cellular Lightweight Concrete (CLC) ការផលិតប្លុក. វាធ្វើអោយប្រសើរឡើងនូវសមត្ថភាពការងារ, minimizes water need, and supports regular foam security during blending and treating.

លក្ខណៈសម្ងាត់

– ការថយចុះទឹកខ្ពស់។ : Decreases water material by approximately 30% without losing flowability.
– Superb slump retention : Maintains mix liquid much longer, which helps in uniform block development.
– Foam-friendly formula : Functions well with light weight aluminum powder or pre-formed foams utilized in CLC.
– Low dose need : Effective at just 0.15%– 0.3% ដោយទម្ងន់បេតុង.
– គ្មានជាតិក្លរីត និងមិនច្រេះ : Safe for steel support if used.

ទិន្នន័យបច្ចេកទេស

– រូបរាង: Light yellow to fade brown fluid
– សម្ភារៈរឹង: 20% ± 1%.
– តម្លៃ pH: 5– 7.
– កម្រាស់ (20 °គ): 1.05– 1.10 g/cm ប្រាំមួយ។.
– មាតិកាក្លរួអ៊ីយ៉ុង: < 0.01%.

ស្តង់ដារប្រើប្រាស់

Add the superplasticizer to the mix water before introducing concrete and aggregates. Mix completely for at the very least 2– 3 នាទីដើម្បីធានាឱ្យមានចរន្តឈាម. Adjust dosage based upon ambient temperature level, concrete type, and preferred density of the CLC block. Constantly perform a small test set prior to full-scale production. ទិញទំនិញក្នុងភាពអស្ចារ្យ, កន្លែងស្ងួតទាំងស្រុងឆ្ងាយពីពន្លឺព្រះអាទិត្យដោយផ្ទាល់. Keep container sealed when not being used to avoid contamination or evaporation.

Advantages in CLC Production

Utilizing this PCE admixture brings about smoother surface areas, ចន្លោះតិច, and much better compressive stamina in ended up blocks. It likewise improves very early stamina advancement, permitting faster demolding and higher production effectiveness. The product stays secure throughout a range of common cements and does not conflict with frothing representatives generally used in lightweight concrete systems.

Applications of Concrete Admixture for CLC Block PCE Polycarboxylate Superplasticizer High Performance

Applications of Concrete Admixture for CLC Block PCE Polycarboxylate Superplasticizer

បង្កើនសមត្ថភាពការងារ និងលំហូរ

PCE polycarboxylate superplasticizer substantially boosts the flow of concrete paste used in Mobile Lightweight Concrete (CLC) ប្លុក. It enables the mix to remain liquid without adding extra water. This assists employees put and form blocks much more conveniently. លទ្ធផលគឺរលូន, uniform texture with less air pockets.

Higher Strength with Much Less Concrete

This admixture improves early and last stamina of CLC blocks. Due to the fact that it minimizes water web content while keeping workability high, the end product becomes denser and stronger. Building contractors can lower concrete use without shedding performance. That lowers material costs and supports greener construction.

Much Better Security and Consistency

PCE-based superplasticizers maintain foam steady throughout blending and healing. In CLC manufacturing, foam top quality straight affects block thickness and insulation. ជាមួយនឹងល្បាយនេះ។, bubbles remain equally distributed. Blocks appear regular in size, ទម្ងន់, and thermal residential properties batch after set.

Enhanced Surface Area Finish

Blocks made with PCE superplasticizer reveal smoother surface areas and sharper edges. There are fewer cracks or harsh spots. This indicates much less demand for grinding or covering prior to usage. Clean coatings also aid with painting or plastering later on.

Compatibility and Alleviate of Use

The admixture works well with common foaming agents and other ingredients utilized in CLC systems. It mixes promptly right into the slurry and does not trigger delays in establishing time when dosed appropriately. Manufacturing facilities can integrate it right into existing production lines without major modifications.

គាំទ្រអគារប្រកបដោយនិរន្តរភាព

By allowing lighter blocks with strong efficiency, this superplasticizer helps reduce architectural tons and transportation discharges. It additionally supports energy-efficient buildings many thanks to the boosted thermal insulation of premium CLC blocks.

ប្រវត្តិរូបក្រុមហ៊ុន

យើងជាក្រុមហ៊ុនឈានមុខគេលើពិភពលោកក្នុងដំណោះស្រាយបេតុងទម្ងន់ស្រាល និងវិស្វកម្មទំនើបៗ. ត្រូវបានគេស្គាល់ទូទាំងពិភពលោកសម្រាប់ការប្តេជ្ញាចិត្តរបស់ខ្លួនក្នុងការស្រាវជ្រាវ, ការច្នៃប្រឌិត, និងជំនាញដែលបានអនុវត្ត, យើងបានផ្តល់ដំណោះស្រាយ Foam ដែលត្រូវបានវិស្វកម្មតាំងពីដើមឆ្នាំ 2012.

យើងអាចផ្គត់ផ្គង់ល្បាយបេតុងដែលមានគុណភាពខ្ពស់ និងផលិតផលដែលទាក់ទងនឹងបេតុងស្នោនៅទូទាំងពិភពលោក.

ក្រុមហ៊ុនមាននាយកដ្ឋានបច្ចេកទេសវិជ្ជាជីវៈ និងនាយកដ្ឋានត្រួតពិនិត្យគុណភាព, មន្ទីរពិសោធន៍ដែលមានបំពាក់យ៉ាងល្អ, និងបំពាក់ដោយឧបករណ៍ធ្វើតេស្តកម្រិតខ្ពស់ និងមជ្ឈមណ្ឌលសេវាកម្មអតិថិជនក្រោយពេលលក់.

ប្រសិនបើអ្នកចាប់អារម្មណ៍, សូមមានអារម្មណ៍សេរី ហើយទាក់ទងមកយើងខ្ញុំ.

ការទូទាត់

T/T, Western Union, Paypal, កាតឥណទានជាដើម។.

ការដឹកជញ្ជូន

តាមអាកាស, តាមសមុទ្រ, ដោយប្រយោគ, ដូចដែលអតិថិជនស្នើសុំ.

5 FAQs of Concrete Admixture for CLC Block PCE Polycarboxylate Superplasticizer High Performance

Frequently Asked Questions About PCE Superplasticizer for CLC Blocks

តើអ្វីទៅជា PCE superplasticizer?

PCE តំណាងឱ្យ polycarboxylate ether. វាគឺជាឧបករណ៍កាត់បន្ថយទឹកដែលមានប្រសិទ្ធភាពខ្ពស់ដែលប្រើក្នុងបេតុង. This admixture helps make the mix more fluid without adding extra water. That means your CLC (បេតុងទម្ងន់ស្រាលកោសិកា) blocks stay strong and easy to work with.

Why use PCE in CLC block production?

CLC blocks need a stable, flowable mix to fill molds evenly. PCE improves workability while keeping low water content. នេះនាំឱ្យមានភាពរឹងមាំកាន់តែប្រសើរ, fewer air pockets, and smoother surfaces on finished blocks.

តើខ្ញុំគួរបន្ថែម PCE ប៉ុន្មាន?

Dosage depends on your mix design and materials. Most producers use 0.1% ទៅ 0.3% ដោយទម្ងន់ស៊ីម៉ងត៍. Always run small trials first. Too little may not help flow; too much can cause segregation or delay setting.

Does PCE affect curing time?

PCE itself does not greatly change curing time. But if your mix has other additives or different cement types, setting might shift slightly. Monitor early strength development during initial test batches.

Can PCE work with foam agents in CLC?

បាទ. PCE works well with common protein- or synthetic-based foam agents. It helps maintain foam stability during mixing and pouring. Just make sure both products are compatible—test them together before full-scale use.