Сайжруулсан гадаргуугийн өнгөлгөө: Агаар шингээх бодис зэрэг нэмэлтүүд нь бетоны өнгөлгөө, өнгө үзэмжийг сайжруулж, хагарал зэрэг согогоос сэргийлдэг., зөгийн сархинаг, эсвэл гадаргуугийн тоосжилт, жигд байдлыг хангах, мэргэжлийн түвшний гадаргуу.

Specification of Concrete Admixture for CLC Block PCE Polycarboxylate Superplasticizer High Performance

Spec of Concrete Admixture for CLC Block: PCE Polycarboxylate Superplasticizer

Зүйлийн танилцуулга

This high-performance polycarboxylate ether (PCE) superplasticizer is specially developed for Cellular Lightweight Concrete (CLC) блок үйлдвэрлэл. Энэ нь ажиллах чадварыг сайжруулдаг, minimizes water need, and supports regular foam security during blending and treating.

Нууц шинж чанарууд

– Усны өндөр бууралт : Decreases water material by approximately 30% without losing flowability.
– Superb slump retention : Maintains mix liquid much longer, which helps in uniform block development.
– Foam-friendly formula : Functions well with light weight aluminum powder or pre-formed foams utilized in CLC.
– Бага тун шаардлагатай : Effective at just 0.15%– 0.3% бетоны жингээр.
– Хлорид агуулаагүй, идэмхий биш : Safe for steel support if used.

Техникийн өгөгдөл

– Гадаад төрх: Цайвар шар өнгөтэй, бүдгэрсэн бор шингэн
– Хатуу материал: 20% ± 1%.
– рН-ийн утга: 5– 7.
– Зузаан (20 ° C): 1.05– 1.10 г/см ЗУРГАДУГААР.
– Хлоридын ионы агууламж: < 0.01%.

Хэрэглээний стандартууд

Add the superplasticizer to the mix water before introducing concrete and aggregates. Хамгийн багадаа 2 удаа бүрэн холино– 3 minutes to ensure even circulation. Орчны температурын түвшинд үндэслэн тунг тохируулна, бетоны төрөл, and preferred density of the CLC block. Constantly perform a small test set prior to full-scale production. Гайхамшигтай дэлгүүрээс дэлгүүр хэсээрэй, нарны шууд тусгалаас хол бүрэн хуурай газар. Keep container sealed when not being used to avoid contamination or evaporation.

Advantages in CLC Production

Utilizing this PCE admixture brings about smoother surface areas, бага зай, and much better compressive stamina in ended up blocks. It likewise improves very early stamina advancement, permitting faster demolding and higher production effectiveness. The product stays secure throughout a range of common cements and does not conflict with frothing representatives generally used in lightweight concrete systems.

Applications of Concrete Admixture for CLC Block PCE Polycarboxylate Superplasticizer High Performance

Applications of Concrete Admixture for CLC Block PCE Polycarboxylate Superplasticizer

Boosted Workability and Flow

PCE polycarboxylate superplasticizer substantially boosts the flow of concrete paste used in Mobile Lightweight Concrete (CLC) блокууд. It enables the mix to remain liquid without adding extra water. This assists employees put and form blocks much more conveniently. Үр дүн нь жигд байна, uniform texture with less air pockets.

Higher Strength with Much Less Concrete

This admixture improves early and last stamina of CLC blocks. Due to the fact that it minimizes water web content while keeping workability high, the end product becomes denser and stronger. Building contractors can lower concrete use without shedding performance. That lowers material costs and supports greener construction.

Much Better Security and Consistency

PCE-based superplasticizers maintain foam steady throughout blending and healing. In CLC manufacturing, foam top quality straight affects block thickness and insulation. Энэ хольцтой хамт, bubbles remain equally distributed. Blocks appear regular in size, жин, and thermal residential properties batch after set.

Enhanced Surface Area Finish

Blocks made with PCE superplasticizer reveal smoother surface areas and sharper edges. There are fewer cracks or harsh spots. This indicates much less demand for grinding or covering prior to usage. Clean coatings also aid with painting or plastering later on.

Тохиромжтой байдал, ашиглалтыг хөнгөвчлөх

The admixture works well with common foaming agents and other ingredients utilized in CLC systems. It mixes promptly right into the slurry and does not trigger delays in establishing time when dosed appropriately. Manufacturing facilities can integrate it right into existing production lines without major modifications.

Supports Sustainable Building

By allowing lighter blocks with strong efficiency, this superplasticizer helps reduce architectural tons and transportation discharges. It additionally supports energy-efficient buildings many thanks to the boosted thermal insulation of premium CLC blocks.

Компанийн танилцуулга

Бид хөнгөн бетон болон дэвшилтэт инженерийн хөөс шийдлээрээ дэлхийд тэргүүлэгч юм. Судалгааны ажилд тууштай ажилладгаараа дэлхийд алдартай, инноваци, болон хэрэглээний туршлага, Бид 2012 оны эхэн үеэс хойш инженерийн боловсруулсан хөөсөн шийдлүүдийг санал болгож байна.

Бид дэлхийн өнцөг булан бүрт өндөр чанартай бетон хольц, хөөс бетонтой холбоотой бүтээгдэхүүнийг нийлүүлэх боломжтой.

Тус компани нь мэргэжлийн техникийн алба, чанарын хяналтын албатай, сайн тоноглогдсон лаборатори, дэвшилтэт туршилтын төхөөрөмж, борлуулалтын дараах харилцагчийн үйлчилгээний төвөөр тоноглогдсон.

Хэрэв та сонирхож байвал, чөлөөтэй, бидэнтэй холбоо барина уу.

Төлбөр

Т/Т, Western Union, Paypal, Зээлийн карт гэх мэт.

Тээвэрлэлт

Агаараар, далайгаар, экспрессээр, үйлчлүүлэгчдийн хүсэлтээр.

5 FAQs of Concrete Admixture for CLC Block PCE Polycarboxylate Superplasticizer High Performance

Frequently Asked Questions About PCE Superplasticizer for CLC Blocks

PCE супер хуванцаржуулагч гэж юу вэ?

PCE нь поликарбоксилатын эфир гэсэн үг. It is a high-performance water reducer used in concrete. This admixture helps make the mix more fluid without adding extra water. That means your CLC (Үүрэн хөнгөн бетон) blocks stay strong and easy to work with.

Why use PCE in CLC block production?

CLC blocks need a stable, flowable mix to fill molds evenly. PCE improves workability while keeping low water content. Энэ нь илүү сайн хүч чадалд хүргэдэг, fewer air pockets, and smoother surfaces on finished blocks.

How much PCE should I add?

Dosage depends on your mix design and materials. Most producers use 0.1% руу 0.3% цементийн жингээр. Үргэлж эхлээд жижиг туршилтуудыг явуул. Too little may not help flow; too much can cause segregation or delay setting.

Does PCE affect curing time?

PCE itself does not greatly change curing time. But if your mix has other additives or different cement types, setting might shift slightly. Monitor early strength development during initial test batches.

Can PCE work with foam agents in CLC?

Тиймээ. PCE works well with common protein- or synthetic-based foam agents. It helps maintain foam stability during mixing and pouring. Just make sure both products are compatible—test them together before full-scale use.