Kemasan Permukaan Dipertingkat: Bahan tambahan seperti agen penyerap udara boleh memperbaiki kemasan dan penampilan konkrit dengan mengelakkan kecacatan seperti keretakan, sarang lebah, atau habuk permukaan, memastikan kelancaran, permukaan gred profesional.

Specification of Concrete Admixture for CLC Block PCE Polycarboxylate Superplasticizer High Performance

Spec of Concrete Admixture for CLC Block: PCE Polycarboxylate Superplasticizer

Pengenalan Perkara

This high-performance polycarboxylate ether (PCE) superplasticizer is specially developed for Cellular Lightweight Concrete (CLC) block manufacturing. Ia meningkatkan kebolehkerjaan, minimizes water need, and supports regular foam security during blending and treating.

Ciri-ciri Rahsia

– Penurunan air yang tinggi : Decreases water material by approximately 30% without losing flowability.
– Superb slump retention : Maintains mix liquid much longer, which helps in uniform block development.
– Foam-friendly formula : Functions well with light weight aluminum powder or pre-formed foams utilized in CLC.
– Keperluan dos yang rendah : Effective at just 0.15%– 0.3% mengikut berat konkrit.
– Bebas klorida dan tidak menghakis : Safe for steel support if used.

Data Teknikal

– Penampilan: Light yellow to fade brown fluid
– Bahan pepejal: 20% ± 1%.
– nilai pH: 5– 7.
– Ketebalan (20 ° C): 1.05– 1.10 g/cm ENAM.
– Kandungan ion klorida: < 0.01%.

Piawaian Penggunaan

Add the superplasticizer to the mix water before introducing concrete and aggregates. Mix completely for at the very least 2– 3 minit untuk memastikan peredaran yang sekata. Adjust dosage based upon ambient temperature level, jenis konkrit, and preferred density of the CLC block. Constantly perform a small test set prior to full-scale production. Membeli-belah dalam yang menakjubkan, tempat yang kering sepenuhnya jauh dari cahaya matahari langsung. Keep container sealed when not being used to avoid contamination or evaporation.

Advantages in CLC Production

Utilizing this PCE admixture brings about smoother surface areas, less spaces, and much better compressive stamina in ended up blocks. It likewise improves very early stamina advancement, permitting faster demolding and higher production effectiveness. The product stays secure throughout a range of common cements and does not conflict with frothing representatives generally used in lightweight concrete systems.

Applications of Concrete Admixture for CLC Block PCE Polycarboxylate Superplasticizer High Performance

Applications of Concrete Admixture for CLC Block PCE Polycarboxylate Superplasticizer

Boosted Workability and Flow

PCE polycarboxylate superplasticizer substantially boosts the flow of concrete paste used in Mobile Lightweight Concrete (CLC) blok. It enables the mix to remain liquid without adding extra water. This assists employees put and form blocks much more conveniently. Hasilnya adalah lancar, uniform texture with less air pockets.

Higher Strength with Much Less Concrete

This admixture improves early and last stamina of CLC blocks. Due to the fact that it minimizes water web content while keeping workability high, the end product becomes denser and stronger. Building contractors can lower concrete use without shedding performance. That lowers material costs and supports greener construction.

Much Better Security and Consistency

PCE-based superplasticizers maintain foam steady throughout blending and healing. In CLC manufacturing, foam top quality straight affects block thickness and insulation. With this admixture, bubbles remain equally distributed. Blocks appear regular in size, berat badan, and thermal residential properties batch after set.

Enhanced Surface Area Finish

Blocks made with PCE superplasticizer reveal smoother surface areas and sharper edges. There are fewer cracks or harsh spots. This indicates much less demand for grinding or covering prior to usage. Clean coatings also aid with painting or plastering later on.

Compatibility and Alleviate of Use

The admixture works well with common foaming agents and other ingredients utilized in CLC systems. It mixes promptly right into the slurry and does not trigger delays in establishing time when dosed appropriately. Manufacturing facilities can integrate it right into existing production lines without major modifications.

Menyokong Bangunan Lestari

By allowing lighter blocks with strong efficiency, this superplasticizer helps reduce architectural tons and transportation discharges. It additionally supports energy-efficient buildings many thanks to the boosted thermal insulation of premium CLC blocks.

Profil Syarikat

Kami adalah peneraju global dalam konkrit ringan dan penyelesaian buih kejuruteraan termaju. Dikenali di peringkat global kerana komitmennya terhadap penyelidikan, inovasi, dan kepakaran yang diterapkan, kami telah menyediakan penyelesaian buih kejuruteraan sejak awal tahun 2012.

Kami boleh membekalkan bahan campuran konkrit berkualiti tinggi dan produk berkaitan konkrit busa di seluruh dunia.

Syarikat ini mempunyai jabatan teknikal profesional dan jabatan penyeliaan kualiti, makmal yang serba lengkap, dan dilengkapi dengan peralatan ujian termaju dan pusat khidmat pelanggan selepas jualan.

Jika anda berminat, sila berasa bebas dan hubungi kami.

Bayaran

T/T, Western Union, Paypal, Kad Kredit dll.

Penghantaran

Melalui udara, melalui laut, secara ekspres, sebagai permintaan pelanggan.

5 FAQs of Concrete Admixture for CLC Block PCE Polycarboxylate Superplasticizer High Performance

Frequently Asked Questions About PCE Superplasticizer for CLC Blocks

Apakah superplasticizer PCE?

PCE bermaksud polycarboxylate ether. Ia adalah pengurang air berprestasi tinggi yang digunakan dalam konkrit. This admixture helps make the mix more fluid without adding extra water. That means your CLC (Konkrit Ringan Selular) blocks stay strong and easy to work with.

Why use PCE in CLC block production?

CLC blocks need a stable, flowable mix to fill molds evenly. PCE improves workability while keeping low water content. Ini membawa kepada kekuatan yang lebih baik, fewer air pockets, and smoother surfaces on finished blocks.

How much PCE should I add?

Dos bergantung pada reka bentuk dan bahan campuran anda. Most producers use 0.1% kepada 0.3% mengikut berat simen. Always run small trials first. Too little may not help flow; too much can cause segregation or delay setting.

Does PCE affect curing time?

PCE itself does not greatly change curing time. But if your mix has other additives or different cement types, setting might shift slightly. Monitor early strength development during initial test batches.

Can PCE work with foam agents in CLC?

ya. PCE works well with common protein- or synthetic-based foam agents. It helps maintain foam stability during mixing and pouring. Just make sure both products are compatible—test them together before full-scale use.