وڌايل مٿاڇري ختم: اضافي شيون جهڙوڪ ايئر-انٽرننگ ايجنٽ ڪنڪريٽ جي ختم ٿيڻ ۽ ظاهري کي بهتر ڪري سگهن ٿا خرابين کي روڪڻ کان جيئن ڀڃڻ, honeycombing, يا سطح مٽي ڪرڻ, هموار کي يقيني بڻائي, پروفيشنل-گريڊ مٿاڇري.

Specification of Concrete Admixture for CLC Block PCE Polycarboxylate Superplasticizer High Performance

Spec of Concrete Admixture for CLC Block: PCE Polycarboxylate Superplasticizer

مضمون جو تعارف

This high-performance polycarboxylate ether (پي سي اي) superplasticizer is specially developed for Cellular Lightweight Concrete (سي ايل سي) block manufacturing. اهو ڪم جي صلاحيت کي بهتر بڻائي ٿو, minimizes water need, and supports regular foam security during blending and treating.

ڳجهي خاصيتون

– تيز پاڻي جي گھٽتائي : Decreases water material by approximately 30% without losing flowability.
– Superb slump retention : Maintains mix liquid much longer, which helps in uniform block development.
– Foam-friendly formula : Functions well with light weight aluminum powder or pre-formed foams utilized in CLC.
– گھٽ دوز جي ضرورت : Effective at just 0.15%– 0.3% ڪنڪريٽ جي وزن سان.
– Chloride-free and non-corrosive : Safe for steel support if used.

ٽيڪنيڪل ڊيٽا

– ظاهر: هلڪو پيلو ته ٿلهو ناسي سيال
– مضبوط مواد: 20% ± 1%.
– pH قدر: 5– 7.
– ٿلهو (20 ° سي): 1.05– 1.10 g/cm SIX.
– ڪلورائڊ آئن مواد: < 0.01%.

استعمال جي معيار

Add the superplasticizer to the mix water before introducing concrete and aggregates. گھٽ ۾ گھٽ 2 لاء مڪمل طور تي ملايو– 3 minutes to ensure even circulation. Adjust dosage based upon ambient temperature level, ڪنڪريٽ جو قسم, and preferred density of the CLC block. Constantly perform a small test set prior to full-scale production. هڪ شاندار ۾ دڪان, مڪمل طور تي سڪل جڳهه سڌو سورج جي روشني کان پري. Keep container sealed when not being used to avoid contamination or evaporation.

Advantages in CLC Production

Utilizing this PCE admixture brings about smoother surface areas, گهٽ جڳهه, and much better compressive stamina in ended up blocks. It likewise improves very early stamina advancement, permitting faster demolding and higher production effectiveness. The product stays secure throughout a range of common cements and does not conflict with frothing representatives generally used in lightweight concrete systems.

Applications of Concrete Admixture for CLC Block PCE Polycarboxylate Superplasticizer High Performance

Applications of Concrete Admixture for CLC Block PCE Polycarboxylate Superplasticizer

Boosted Workability and Flow

PCE polycarboxylate superplasticizer substantially boosts the flow of concrete paste used in Mobile Lightweight Concrete (سي ايل سي) بلاڪ. It enables the mix to remain liquid without adding extra water. This assists employees put and form blocks much more conveniently. نتيجو هڪ هموار آهي, uniform texture with less air pockets.

تمام گھٽ ڪنڪريٽ سان اعلي طاقت

This admixture improves early and last stamina of CLC blocks. Due to the fact that it minimizes water web content while keeping workability high, the end product becomes denser and stronger. Building contractors can lower concrete use without shedding performance. That lowers material costs and supports greener construction.

Much Better Security and Consistency

PCE-based superplasticizers maintain foam steady throughout blending and healing. In CLC manufacturing, foam top quality straight affects block thickness and insulation. هن مرکب سان, bubbles remain equally distributed. Blocks appear regular in size, وزن, and thermal residential properties batch after set.

Enhanced Surface Area Finish

Blocks made with PCE superplasticizer reveal smoother surface areas and sharper edges. There are fewer cracks or harsh spots. This indicates much less demand for grinding or covering prior to usage. Clean coatings also aid with painting or plastering later on.

مطابقت ۽ استعمال جي خاتمي

The admixture works well with common foaming agents and other ingredients utilized in CLC systems. It mixes promptly right into the slurry and does not trigger delays in establishing time when dosed appropriately. Manufacturing facilities can integrate it right into existing production lines without major modifications.

پائيدار عمارت جي حمايت ڪري ٿو

By allowing lighter blocks with strong efficiency, this superplasticizer helps reduce architectural tons and transportation discharges. It additionally supports energy-efficient buildings many thanks to the boosted thermal insulation of premium CLC blocks.

ڪمپني پروفائل

اسان ٿلهي ڪنڪريٽ ۽ جديد انجنيئر فوم حل ۾ عالمي اڳواڻ آهيون. تحقيق جي عزم لاء عالمي سطح تي سڃاتو وڃي ٿو, جدت, ۽ لاڳو ڪيل مهارت, اسان 2012 جي شروعات کان وٺي انجنيئر فوم حل فراهم ڪري رهيا آهيون.

اسان سڄي دنيا ۾ اعلي معيار جي ڪنڪريٽ ملائڻ ۽ فوم ڪنڪريٽ سان لاڳاپيل مصنوعات فراهم ڪري سگهون ٿا.

ڪمپني وٽ هڪ پیشہ ور ٽيڪنيڪل ڊپارٽمينٽ ۽ معيار جي نگراني واري کاتي آهي, هڪ چڱي طرح ليس ليبارٽري, ۽ جديد جاچ سامان سان ليس ۽ پوء-سيلز ڪسٽمر سروس سينٽر.

جيڪڏھن توھان دلچسپي وٺندا آھيو, مهرباني ڪري آزاد محسوس ڪريو ۽ اسان سان رابطو ڪريو.

ادائگي

ٽي/ٽي, ويسٽرن يونين, پي پال, ڪريڊٽ ڪارڊ وغيره.

ترسيل

هوا ذريعي, سمنڊ ذريعي, اظهار ذريعي, جيئن گراهڪن جي درخواست.

5 FAQs of Concrete Admixture for CLC Block PCE Polycarboxylate Superplasticizer High Performance

Frequently Asked Questions About PCE Superplasticizer for CLC Blocks

PCE superplasticizer ڇا آهي؟?

PCE پولي ڪاربوڪسيليٽ ايٿر لاءِ بيٺل آهي. اهو هڪ اعلي ڪارڪردگي وارو پاڻي گهٽائڻ وارو آهي جيڪو ڪنڪريٽ ۾ استعمال ٿيندو آهي. This admixture helps make the mix more fluid without adding extra water. That means your CLC (سيلولر لائيٽ ويٽ ڪنڪريٽ) blocks stay strong and easy to work with.

Why use PCE in CLC block production?

CLC blocks need a stable, flowable mix to fill molds evenly. PCE improves workability while keeping low water content. اهو بهتر طاقت جي ڪري ٿي, fewer air pockets, and smoother surfaces on finished blocks.

مون کي ڪيترو PCE شامل ڪرڻ گهرجي?

dosage توهان جي ميلاپ جي ڊيزائن ۽ مواد تي منحصر آهي. Most producers use 0.1% جي طرف 0.3% سيمينٽ جي وزن سان. ھميشه پھريون ننڍيون آزمائشون ڪريو. Too little may not help flow; too much can cause segregation or delay setting.

Does PCE affect curing time?

PCE itself does not greatly change curing time. But if your mix has other additives or different cement types, setting might shift slightly. Monitor early strength development during initial test batches.

Can PCE work with foam agents in CLC?

ها. PCE works well with common protein- or synthetic-based foam agents. It helps maintain foam stability during mixing and pouring. Just make sure both products are compatible—test them together before full-scale use.