Overview of Mold Release Agent and Concrete Foaming Agent for Construction

Mold Release Agent and Concrete Foaming Agent for Construction is a surfactant that generates large quantities of uniform, በአካላዊ ወይም በኬሚካላዊ ዘዴዎች የተረጋጋ አረፋ. ይህ አረፋ በሲሚንቶ ላይ የተመሰረተ ፈሳሽ በደንብ ሲቀላቀል (ሲሚንቶ, ዝንብ አመድ, ወዘተ.) እና በተፈጥሮ ወይም በእንፋሎት ይድናል, ቀላል ክብደት ያለው አዲስ ነገር ይፈጥራል - የአረፋ ኮንክሪት - በውስጥ በብዙ የተዘጉ የአየር ሕዋሳት የተሞላ.

Features of Mold Release Agent and Concrete Foaming Agent for Construction

1. ከፍተኛ የአረፋ ማባዛት ሬሾ: ከፍተኛ የአረፋ ብዜት ሬሾ ከመጠቀምዎ በፊት እንዲሟሟት ያስችላል. አንድ ኪሎ ግራም ማጎሪያ ከፍተኛ መጠን ያለው ወጥ የሆነ አረፋ ይፈጥራል, ከፍተኛ ወጪ ቁጠባ ማቅረብ.

2. ጠንካራ የአረፋ መረጋጋት: የመቋቋም ችሎታን ይፈጥራል, መውደቅ ወይም መሰባበርን የሚቋቋም ወጥ የሆነ ጥሩ የአረፋ ግድግዳዎች. ከሲሚንቶ ፈሳሽ ግፊትን በተሳካ ሁኔታ ይቋቋማል, በተጠናቀቀው ምርት ውስጥ ገለልተኛ እና የታሸጉ የአየር ሴሎችን ማረጋገጥ.

3. ዩኒፎርም እና ጥሩ ቀዳዳ መዋቅር: የአረፋ ኮንክሪት የተዘጉ የሉል ጥቃቅን ቀዳዳዎች ተስማሚ የሆነ ውስጣዊ መዋቅር ያሳያል, የላቀ አካላዊ ባህሪያትን ማረጋገጥ.

4. ዝቅተኛ የቁሳቁስ ፍጆታ: ከመደበኛ የገበያ ምርቶች ባነሰ መጠን ተመጣጣኝ ጥንካሬ እና ጥንካሬ ደረጃዎችን ያሳካል, ወጪዎችን በመቀነስ.

5. ለአካባቢ ተስማሚ እና ደህንነቱ የተጠበቀ: ገለልተኛ አጻጻፍ, መርዛማ ያልሆነ, ሽታ የሌለው, እና የማይበላሽ, በአካባቢ ወይም በሰው ጤና ላይ ምንም ጉዳት አያስከትልም. እንደ አረንጓዴ የግንባታ ቁሳቁስ ተመድቧል.

6. ሰፊ መላመድ: ከተለያዩ ሲሚንቶዎች ጋር በጣም ጥሩ ተኳሃኝነት (ተራ የፖርትላንድ ሲሚንቶ እና አልሙኒየም ሲሚንቶ ጨምሮ) እና ድብልቆች. ከተራዘመ የአረፋ መረጋጋት ጋር ፈጣን የአረፋ እርምጃ.

Specifications of Mold Release Agent and Concrete Foaming Agent for Construction

የምርት ዝርዝሮች

Mold Release Agent

መልክ: ግልጽ ለብርሃን አምበር ፈሳሽ
ጠንካራ ይዘት: 25–30%
ፒኤች ዋጋ: 6.5-8.0 (ለመጠቀም ዝግጁ በሆነ ቅጽ)
የዲሉሽን ሬሾ: 1 part concentrate to 5–10 parts water, depending on surface and weather conditions
Coverage Rate: Approximately 30–40 m² per liter when diluted
Drying Time: 15–30 minutes at 25°C
ተኳኋኝነት: Works well with steel, እንጨት, ፋይበርግላስ, and plastic formwork
ማከማቻ: በብርድ ውስጥ ያስቀምጡ, በ 5 ° ሴ እና በ 35 ° ሴ መካከል ያለው ደረቅ ቦታ; shelf life of 12 months in original sealed container

This agent forms a thin, non-staining film that prevents concrete from sticking to molds. It does not leave residue on finished surfaces. The product is water-based and safe for use around workers and equipment.

የኮንክሪት አረፋ ወኪል

መልክ: Viscous, light yellow to brown liquid
Active Matter Content: ≥35%
ፒኤች ዋጋ: 7.0-9.0
የአረፋ ማስፋፊያ ሬሾ: 20:1 ወደ 30:1 (የአረፋ መጠን ወደ መፍትሄ መጠን)
የአረፋ መረጋጋት: Holds structure for over 60 minutes under standard test conditions
የመድኃኒት መጠን: 0.5–1.5 kg per cubic meter of lightweight concrete
ተኳኋኝነት: Mixes easily with ordinary Portland cement and common admixtures
ማከማቻ: Store between 0°C and 40°C; ቅዝቃዜን ያስወግዱ; usable up to 12 months if unopened

ይህ የአረፋ ወኪል መረጋጋት ይፈጥራል, በኮንክሪት ድብልቅ ውስጥ ወጥ የሆነ የአየር አረፋዎች. It helps produce lightweight cellular concrete with consistent density and good insulation properties. The foam remains intact during pouring and setting, which supports even strength development.

Applications of Mold Release Agent and Concrete Foaming Agent for Construction

Applications of Mold Release Agent and Concrete Foaming Agent in Construction

Mold Release Agent: Smooth Demolding, Better Surfaces

Mold release agents are used to help separate hardened concrete from formwork. ያለ እነርሱ, concrete often sticks to molds, causing surface damage or delays. These agents create a thin barrier between the mold and fresh concrete. This makes it easier to remove forms without harming the structure. Builders use them on walls, አምዶች, ጨረሮች, እና ቅድመ-አካላት. The result is a clean finish that needs little repair. Water-based and oil-based types are both common. Each works well when applied correctly before pouring concrete.

የኮንክሪት አረፋ ወኪል: Lightweight Strength

Concrete foaming agents mix air into cement to produce lightweight concrete. This reduces weight while keeping good strength. It also improves insulation and fire resistance. Workers add the foaming agent to water first, then blend it into the mix. The bubbles stay stable during pouring and curing. This type of concrete is ideal for floor fills, የጣሪያ ጣራዎች, የግድግዳ ፓነሎች, and road sub-bases. It saves material costs and eases transport and handling. በተጨማሪም, it helps meet energy efficiency goals in modern buildings.

Both products support faster work and higher quality results. Mold release agents protect surfaces and speed up form reuse. Foaming agents cut weight and boost performance. Using them right means fewer problems on site and better outcomes for every project. Contractors choose these additives because they solve real issues—sticking forms, heavy pours, rough finishes—and make construction smoother from start to finish.

የኩባንያው መገለጫ

እኛ ቀላል ክብደት ያለው ኮንክሪት እና የላቀ የምህንድስና የአረፋ መፍትሄዎች መሪ ነን. ለምርምር ባለው ቁርጠኝነት በዓለም አቀፍ ደረጃ ይታወቃል, ፈጠራ, እና የተተገበረ እውቀት, ከ2012 ዎቹ መጀመሪያ ጀምሮ የምህንድስና የአረፋ መፍትሄዎችን እየሰጠን ነው።.

በዓለም ዙሪያ ከፍተኛ ጥራት ያላቸውን የኮንክሪት ድብልቅ እና የአረፋ ኮንክሪት ተዛማጅ ምርቶችን ማቅረብ እንችላለን.

ኩባንያው ሙያዊ የቴክኒክ ክፍል እና የጥራት ቁጥጥር ክፍል አለው, በሚገባ የታጠቀ ላብራቶሪ, እና የላቀ የሙከራ መሣሪያዎች እና ከሽያጭ በኋላ የደንበኞች አገልግሎት ማዕከል የታጠቁ.

ፍላጎት ካሎት, እባክህ ነፃነት ይሰማህ እና አግኘን።.

ክፍያ

ቲ/ቲ, ዌስተርን ዩኒየን, Paypal, ክሬዲት ካርድ ወዘተ.

መላኪያ

በአየር, በባህር, በመግለፅ, ደንበኞች እንደሚጠይቁ.

5 FAQs of Mold Release Agent and Concrete Foaming Agent for Construction

በተደጋጋሚ የሚጠየቁ ጥያቄዎች

What is a mold release agent?

A mold release agent is a product you apply to forms or molds before pouring concrete. It creates a barrier so the hardened concrete does not stick. This makes it easy to remove the form without damaging the surface.

ለምን የኮንክሪት አረፋ ወኪል ይጠቀሙ?

A concrete foaming agent adds air bubbles into the mix. This makes the concrete lighter and improves insulation. It also helps the mix flow better, which is useful for filling tight spaces or complex shapes.

Are mold release agents safe for workers?

Most modern mold release agents are water-based and low in odor. They meet safety standards for construction sites. Always check the label and follow instructions. Wear gloves and eye protection when applying them.

Can I use any mold release on all types of forms?

ሁልጊዜ አይደለም. Some release agents work best with wood, others with steel or plastic. Using the wrong type may cause stains or poor release. Check the product details to match your form material.

How much foaming agent should I add to concrete?

The amount depends on the brand and the result you want. Too little gives no effect. Too much weakens the concrete. Follow the manufacturer’s mixing guide. Start with the recommended dose and adjust only if needed.