Overview of Mold Release Agent and Concrete Foaming Agent for Construction

Mold Release Agent and Concrete Foaming Agent for Construction is a surfactant that generates large quantities of uniform, stabilas putas ar fizikāliem vai ķīmiskiem līdzekļiem. Kad šīs putas ir rūpīgi sajauktas ar cementa bāzes vircu (cements, lidojošie pelni, utt.) un konservēti dabiski vai ar tvaiku, tas veido jaunu vieglu materiālu — putu betonu — iekšpusi piepildīts ar daudzām slēgtām gaisa šūnām.

Features of Mold Release Agent and Concrete Foaming Agent for Construction

1. Augsta putu reizināšanas attiecība: Augsts putu pavairošanas koeficients ļauj atšķaidīt pirms lietošanas. Viens kilograms koncentrāta rada lielu daudzumu viendabīgu putu, nodrošinot ievērojamus izmaksu ietaupījumus.

2. Spēcīga putu stabilitāte: Ražo elastīgu, vienmērīgi smalkas putuplasta sienas, kas ir izturīgas pret sabrukšanu vai lūzumiem. Efektīvi iztur spiedienu no cementa vircas, neatkarīgu un noslēgtu gaisa šūnu nodrošināšana gatavajā produktā.

3. Vienveidīga un smalku poru struktūra: Putu betonam ir ideāla slēgtu sfērisku mikroporu iekšējā struktūra, garantē izcilas fizikālās īpašības.

4. Zems materiālu patēriņš: Sasniedz līdzvērtīgas blīvuma un stiprības pakāpes ar mazāku devu nekā standarta tirgus produkti, samazinot izmaksas.

5. Videi draudzīgs un drošs: Neitrāls sastāvs, nav toksisks, bez smaržas, un nav kodīgs, neradot kaitējumu videi vai cilvēku veselībai. Klasificēts kā zaļš būvmateriāls.

6. Plaša pielāgošanās spēja: Lieliska saderība ar dažādiem cementiem (ieskaitot parasto portlandcementu un alumināta cementu) un piemaisījumi. Ātra putošanās darbība ar palielinātu putu stabilitāti.

Specifications of Mold Release Agent and Concrete Foaming Agent for Construction

Produkta specifikācijas

Mold Release Agent

Izskats: Dzidrs līdz gaiši dzintara krāsas šķidrums
Cietvielu saturs: 25-30%
pH vērtība: 6.5–8,0 (in ready-to-use form)
Atšķaidīšanas attiecība: 1 part concentrate to 5–10 parts water, depending on surface and weather conditions
Coverage Rate: Approximately 30–40 m² per liter when diluted
Drying Time: 15–30 minutes at 25°C
Saderība: Works well with steel, koka, stikla šķiedra, and plastic formwork
Uzglabāšana: Uzglabāt vēsumā, sausā vietā no 5°C līdz 35°C; shelf life of 12 mēnešus oriģinālajā noslēgtā traukā

This agent forms a thin, non-staining film that prevents concrete from sticking to molds. It does not leave residue on finished surfaces. The product is water-based and safe for use around workers and equipment.

Betona putošanas līdzeklis

Izskats: Viscous, light yellow to brown liquid
Active Matter Content: ≥35%
pH vērtība: 7.0–9.0
Putu izplešanās koeficients: 20:1 uz 30:1 (volume of foam to volume of solution)
Putu stabilitāte: Holds structure for over 60 minutes under standard test conditions
Dozēšana: 0.5–1.5 kg per cubic meter of lightweight concrete
Saderība: Mixes easily with ordinary Portland cement and common admixtures
Uzglabāšana: Store between 0°C and 40°C; avoid freezing; usable up to 12 months if unopened

Šis putotājs rada stabilu, vienmērīgi gaisa burbuļi betona maisījumos. It helps produce lightweight cellular concrete with consistent density and good insulation properties. The foam remains intact during pouring and setting, which supports even strength development.

Applications of Mold Release Agent and Concrete Foaming Agent for Construction

Applications of Mold Release Agent and Concrete Foaming Agent in Construction

Mold Release Agent: Smooth Demolding, Better Surfaces

Mold release agents are used to help separate hardened concrete from formwork. Bez tiem, concrete often sticks to molds, causing surface damage or delays. These agents create a thin barrier between the mold and fresh concrete. This makes it easier to remove forms without harming the structure. Builders use them on walls, kolonnas, sijas, un saliekamie elementi. The result is a clean finish that needs little repair. Water-based and oil-based types are both common. Each works well when applied correctly before pouring concrete.

Betona putošanas līdzeklis: Lightweight Strength

Concrete foaming agents mix air into cement to produce lightweight concrete. This reduces weight while keeping good strength. It also improves insulation and fire resistance. Workers add the foaming agent to water first, then blend it into the mix. The bubbles stay stable during pouring and curing. This type of concrete is ideal for floor fills, jumta klāji, sienu paneļi, and road sub-bases. It saves material costs and eases transport and handling. Plus, it helps meet energy efficiency goals in modern buildings.

Both products support faster work and higher quality results. Mold release agents protect surfaces and speed up form reuse. Foaming agents cut weight and boost performance. Using them right means fewer problems on site and better outcomes for every project. Contractors choose these additives because they solve real issues—sticking forms, heavy pours, rough finishes—and make construction smoother from start to finish.

Uzņēmuma profils

Mēs esam pasaules līderi vieglā betona un modernu putuplasta risinājumu jomā. Pasaulē pazīstams ar savu apņemšanos veikt pētniecību, inovācijas, un pielietotās zināšanas, mēs esam nodrošinājuši inženierijas putu risinājumus kopš 2012. gada sākuma.

Mēs varam piegādāt augstas kvalitātes betona piedevas un putu betona produktus visā pasaulē.

Uzņēmumam ir profesionāla tehniskā nodaļa un kvalitātes uzraudzības nodaļa, labi aprīkota laboratorija, un aprīkots ar modernu testēšanas aprīkojumu un pēcpārdošanas klientu apkalpošanas centru.

Ja jūs interesē, lūdzu, jūtieties brīvi un sazinieties ar mums.

Maksājums

T/T, Western Union, Paypal, Kredītkarte utt.

Sūtījums

Pa gaisu, pa jūru, ar eksprespasta palīdzību, pēc klientu pieprasījuma.

5 FAQs of Mold Release Agent and Concrete Foaming Agent for Construction

Bieži uzdotie jautājumi

What is a mold release agent?

A mold release agent is a product you apply to forms or molds before pouring concrete. It creates a barrier so the hardened concrete does not stick. This makes it easy to remove the form without damaging the surface.

Why use a concrete foaming agent?

A concrete foaming agent adds air bubbles into the mix. This makes the concrete lighter and improves insulation. It also helps the mix flow better, which is useful for filling tight spaces or complex shapes.

Are mold release agents safe for workers?

Most modern mold release agents are water-based and low in odor. They meet safety standards for construction sites. Always check the label and follow instructions. Wear gloves and eye protection when applying them.

Can I use any mold release on all types of forms?

Ne vienmēr. Some release agents work best with wood, others with steel or plastic. Using the wrong type may cause stains or poor release. Check the product details to match your form material.

How much foaming agent should I add to concrete?

The amount depends on the brand and the result you want. Too little gives no effect. Too much weakens the concrete. Follow the manufacturer’s mixing guide. Start with the recommended dose and adjust only if needed.